My Macbook pro when plugged in will hold a green light and not be recognized by the computer to charge. SMC reset done several times. Any help?

Our MBP bought earlier this year when plugged in to charge will hold a green light and not be recognized by the computer as charging. Sometimes if we turn it around or plug it in multiple times will work. We have reset the SMC several times and will work for a little while then go back to the same problem. Any help or ideas on how to fix it would be great.

Hi Why must I,
I'm sorry to hear you are having charging issues with your MacBook Pro. It sounds like you have been on the right track in troubleshooting this issue; SMC resets are often an appropriate step for battery or power issues. If this issue persists, you may find the additional troubleshooting steps outlined in the following articles helpful:
Mac notebooks: All about batteries - Apple Support
OS X Mavericks: If your battery won’t charge
Note: If you reach the last step in the second article and it looks like you may need to have your MacBook Pro serviced, you may find this page useful:
Apple - Support - Service Answer Center
Regards,
- Brenden

Similar Messages

When I turn on a video the screen on my MacBook Pro freezes. I've been through Apple Care and they couldn't fix the computer. I think the fan and the graphics are the problems

When I turn on a video the screen on my MacBook Pro freezes. I've been through Apple Care and they couldn't fix the computer. I think the fan and the graphics are the problems. I can restart after two attempts. Sometimes I use SAFEBOOT

Please advise the model MBP you have and the OSX you have installed.
Also try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

How do I take the zoom feature off my MacBook Pro? I have already went to System Preferences and turned "zoom" off in the Universal Access. I saw where someone said to use THREE fingers to double click... ??? Double click what? And 3 fingers?

Can someone help me?How do I take the zoom feature off my MacBook Pro? I have already went to System Preferences and turned "zoom" off in the Universal Access. I saw where someone said to use THREE fingers to double click... ??? Double click what? And 3 fingers?

What really cheeses me off here is that Apple isn't allowing users enough customization. With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options. If Apple keeps this up, they're going to start losing customers fast. I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
What I don't understand about how they won't let users delete the list of available podcasts now is why? How is this making it a better program? I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was). But to not give users the option to delete that list? It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating. I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature. It smacks of rank incompetence.
What improvement were they trying to make here anyway? There was nothing wrong to my mind about how podcasts were managed in previous versions. Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
And reverting to a previous version is no solution. I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.

My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.

Most common culprits include the cable. Try swapping it out for a different one.. or not having the most recent version of itunes. I once even solved this problem by shutting down the computer for 2 minutes. (the longer the better), with the ipad plugged in. starting it up... then itunes recognizes it, launches, and syncs.
Apple has a troubleshooting assistant on this topic:
http://www.apple.com/support/ipad/assistant/itunes/
It will advise you to reboot. I recommend shutting down instead.
--Sam
P.S The ipad should charge when asleep and plugged into your Mac. The charging behavior is normal. There isn't enough power out the USB ports to charge the ipad while it is on on some older Macs and nearly all PCs.

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

My IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help

my IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help

iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
 Cheers, Tom

When i input cd's or dvd's they won't stay in the computer it pops out after a few seconds..HELP PLEASE

When i input cd's or dvd's they won't stay in the computer it pops out after a few seconds..HELP PLEASE

Section; Specific Troubleshootng
http://support.apple.com/kb/HT2801
Best.

I downloaded the whatsapp app to my new iphone, and when i wanted to create an account, i could not, it said, unable to send message. I downloaded it several times later, but i still could not create the account, it always said, unable to send, help

I downloaded the whatsapp app to my new iphone, and when i wanted to create an account, i could not, it said, unable to send message. I downloaded it several times later, but i still could not create the account, it always said, unable to send, help

I recommend reaching out to Citrix via their support system -
http://www.citrix.com/products/receiver/resources-and-support.html
The receiver app has a specific list of servers it's compatible with, if the server is not on the list the app won't work in OS X.
http://support.citrix.com/servlet/KbServlet/download/28492-102-671726/Receiver%2 0for%20Mac%2011%204%20FAQ%20v1_1235.pdf
Do you know what server you're connecting to?

Why did my ipod touch gen5 only hold under 4000 songs and not 10000, I had the proper settings @128

why does my ipod touch 5gen only hold just under 4000 songs and not 10000, I had the proper settings @128?

it is a 32gb unit

I am stumped I do not understand why my roommates macbook pro when duel screened will display perfectly on my monitor while mine refuses to, but mine will display perfectly when using another monitor that is not mine. Please help me out.

One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

Macbook pro running windows 7 parallel vpn works in windows and not mac

I recently purchased a macbook pro. My medical management software runs in windows. I installed the software on the mac using parallels. If I'm at my home network/office I can access the server/program. When I try to access the vpn outside the network it won't work.

Parallels is supossed to be loaded on Mac OS platform and then you load Windows 7 on Parallels. The VPN is also supposed to be loaded on the Parallels platform. The VPN is not supposed to be on the Mac platform.
If you need to run the VPN on the Mac platform then you have to edit the set up of it because it is not the same as running in Windows. You'll have to ask your IT person about using the VPN on the OS X.

After not using my macbook pro for 10 days, my wireless mouse no longer works. (I had turned the computer off). I've gone in to mouse preferences but the computer won't recoginize the mouse. It worked fine before the trip. Batteries were changed.

After not using my macbook pro for 10 days, my wireless mouse no longer works. I had the computer turned off. I've changed the batteries, gone to universal preferences, mouse preferences but the computer won't recognize the mouse. Any suggestions?

Got it. Thanks. I deleted the mouse (not an apple, but a logitech which has worked fine for me) and then re-discovered it and it's working. Appreciate the advice.

MacBook Pro won't turn on even with green light on charger

i have a 2010 MacBook Pro. The battery has been permanently dead for years but it still turned on as long as I had the charger connected. Eventually the charger stopped working so I bought a new one. The light is green on the charger but the MacBook won't turn on now. I tried that reset thing as well as opening up the bottom and disconnecting and reconnecting the battery and that didn't worn either. I pressed the button on the side and there's green flashing lights so its definitely getting power it just won't turn on. I don't know what else to do at this point.

icychill69 wrote:
I tried that reset thing
Was that 'reset thing' a SMC reset?
http://support.apple.com/en-us/HT201295
If so, a new battery may be the cure but bring the MBP to an Apple store genius bar for a definitive evaluation first.
Ciao.

I have a MacBook Pro. Lately my volume button is grayed out and not working. Any solutions on how to fix this? Thanks.

I have an older MacBook Pro (circa 2009). Lately I've noticed my volume button is grayed out and I cannot adjust it. I've tried rebooting. Sometimes it becomes available to use and other times not. Any ideas on how to fix this? Thanks!

Reset the SMC. Check the Audio Midi Setup utility. If connected to an external display that has audio, that may have hijacked the audio.

My Macbook pro when plugged in will hold a green light and not be recognized by the computer to charge. SMC reset done several times. Any help?

Similar Messages

Maybe you are looking for