My macbook pro will not hold life even though plugged in - I know battery life is about gone; does that mean it won't stay alive even though plugged in?

My macbook pro will not hold life even though it is plugged in when I use it. I know the battery life is about gone, but didn't realize this effects it when plugged in or does it. It is about 7 years old. This is second battery. Am I right to think this?

You are right - a dead battery can some times play these kinds of tricks.
If this is a removable battery, I suggest you take out the battery and try running it on the power adpater alone.

Similar Messages

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

My Macbook Pro will not hold a charge

If I charge my Macbook Pro 13" to a full charge, then unplug it, the battery will drain over the next 2 days.
Specifically, if the laptop is "closed" and just sitting on my desk, the little white led light flashes slowly and the laptop loses its charge in about 2 days. Is this standard? It's quite annoying....
Should I take this back to Apple and have it serviced/looked at?
Thanks,
Lance

Here's more information:
Battery Information:
Model Information:
Serial Number:          W00154MZ6D3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          4639
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5554
Health Information:
Cycle Count:          91
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -776
Voltage (mV):          11984
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Battery Power:
System Sleep Timer (Minutes):          1
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          1
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000

My MacBook pro will not start up and it keeps beeping. The battery is fully charged.

MacBook pro went to sleep last night. This morning plugged it in to charge the battery. It will not turn on now. According to the plug and the battery display lights on the side, it is fully charged. It is also beeping every 5 to 6 seconds.

You have ram issues.

My Macbook pro will not recognize external devices

My MacBook Pro will not recongize external devices such as hard drives

I know that is of no help, but I have the same problem with a Toshiba harddrive. My wifes Macbook Air recognizes it. No problem with the hd I guess. But my macbook pro won't show it in the Finder, About this mac or disk utility - even though it is running. I would also be glad to get a solution to this.

HT203254 MacBook pro will not boot up?

My 2007 MacBook pro will not boot up. Sometimes just stops booting before password screen, but other times after that. If I get to put in my password it goes on, but I either get a blank screen or partial jumbled screen. When using boot disc and run hardware test it gives a video controller error 4VDC/1/40000003. Would that make it hang up and not fully boot? I can understand it giving blank and jumbled screens.

Means you need a new logic board. Make an appointment at an Apple store to confirm.

Both my iMac and macbook pro will not connect to a certain web site?

Both my macs (21" new iMac & a 2008 macbook pro) will not connect to foxcycling.co.uk. I know the site is live as I can access on my iphone and ipad.
From what I've read on the forums its a settings issue which probably migrated from the macbook to the iMac when I migrated the data.
Very frustrating ....
Any idea's and simple solutions?
Both systems up to date etc

OK, OS X does not include Adobe Flash. The website is probably Flash based. Chrome has Flash incorporated into it. If you want to download and install Flash visit Adobe's website and download Flash for your system.

My macbook pro will not charge when I am using it.

My macbook pro will not charge when I am using it. My battery will say "charged" then "not charging" and it goes back and fourth. It says "Power Source: Power Adapter". But when I use my pro it will loose the power source then reconnect a second later to it. This problem is getting annoying because I have to stop using my macbook pro to charge it.

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Macbook pro will not boot even to grey screen ??

my macbook pro will not boot even to grey screen ?? Just stopped wprking after I closed the cover.

What other indications are there, does the white light turn on, solid or pulsing?, do you hear the startup chime, or bong if you prefer. Can you hear the drive, the fans?
More information from you will assist us trying to help you.

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

Hi there tomcrud,
You may find the information in the article below helpful.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
-Griff W.

My MacBook Pro will not powerup (even when connected to power supply).

My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy

The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]

Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

MacBook Pro will not shut down

A principal at my district has a MacBook Pro 15-inch Early 2008 (2.4/2X1GB/200-5400/256VRAM/AG) running OS 10.5.8 that will not shut down. When shut down is chosen, the computer restarts instead of shutting down. It does not matter how shut down is chosen, whether it is from pull down menu, keyboard command, click on shutdown in the login menu, etc. I have tried resetting PRAM, SMC, starting up from a known good system, and run diagnostics applications (which turn up no problems). The only way to get the machine to tunr off is hold the power button down until it shuts off.
The user complains it also gets very hot when he leaves it sitting open in sleep mode. I have not observed that particular symptom. It also tend to run down the battery faster than it should (battery check shows it to have 80+% of it's original capacity.) But Activity Monitor does not show any unusual activity.
Any suggestions what I can try next to figure this thing out?
Thanks.

On occassion (like tonight) my MacBook Pro will not
shut down - even when I attempt to force quit. Any
suggestions?
Happens here too, but very rarely. In my case it mostly happens late at night when OS X is supposed to run some internal maintenance jobs, maybe some of them do not allow a shutdown?
Does holding the power button down for approx. 10 seconds work? If yes, then I would not worry about it. If no, there is something seriously odd and I would report it to AppleCare.
Cheers,
Uwe

Mid-2009 Macbook Pro will not turn on

Hi Folks,
so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
Thanks for any help. I really appreciate it.
Ken

Ken,
the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

My macbook pro will not hold life even though plugged in - I know battery life is about gone; does that mean it won't stay alive even though plugged in?

Similar Messages

Maybe you are looking for