My MacBook Pro will not load

My MacBook Pro will not load. I get the white screen with spinning rainbow for several minutes. Once I get the log-in screen it takes several more minutes of the galaxy screen before anything happens. When I am finally able to click the mouse on an application, I get the spinning thing again and nothing loads. The only thing I can do is turn the computer off by holding down the power button.

You might have an older model that came with disks. In that case, put the disk in and boot while holding down the C key. Run Disk Utility from there.

Similar Messages

MacBook Pro will not load Facebook

MacBook Pro will not load Facebook, pictures on Pinterest, and will not play any Youtube videos. I already checked for software updates and it is still not working. This is happening in both firefox and safari.

tanyafromva wrote:
MacBook Pro will not load Facebook, pictures on Pinterest, and will not play any Youtube videos. I already checked for software updates and it is still not working. This is happening in both firefox and safari.
You have to do more than just check. If flash player is out dated, you must download & install.

MacBook Pro will not load start up properly

My MacBook Pro 2012 will not load properly after I took it to the apple store and they ran test on it. When I boot it up I get the gray screen with the loading bar. I can get into disk utility. However I don't believe they messed with anything and it was wirking fine in the store

Try:
Mac OS X: Gray screen appears during startup
BTW, this is the Mac Pro desktop forum

My Macbook Pro will not load past grey Apple screen...

Last night my Macbook Pro froze so I closed it and went to bed. Today when I opened it, it was still frozen, so I held down the power button and rebooted it. It got as far as the grey Apple screen with the spinning wheel and will not load any further than that. I've rebooted a couple times since and it continues to do the same thing, stays on the grey screen forever.
I searched this problem on the Apple Support Communitites and none of suggestions (holding Shift after the startup tone, holding Command+R) have worked so far. Is there any way to fix this problem without losing my data or having to pay to talk to Apple Support? PLEASE HELP! :(

Zzoozu wrote:
None of that made sense to me or helped me. Anyone else? Maybe someone who has answers dor someone not a computer genius?
Then we can't help you as we need you to be able to help yourself and the instructions are complicated and long to paste here over and over again for the same proceedure.
Hire the services of a local Mac computer repair before you delete your data by accident.
You can jump down and do #8, that might clear the issue right away, but some programs are not going to work and require updating or reinstalling again.
..Step by Step to fix your Mac

My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

Macbook Pro will not load after TM restore

I have a Macbook Pro 4,1 and the HD was making noise so it was replaced with a Seagate 500 GB 7200 rpm and after I booted from the Install DVD and went through the Restore From Back Up in the Utilities the machine copied my last back up. However, after it told me to restart the machine, it begins to load and the gives me a gray screen with "You need to restart your computer. Hold down the power button for several seconds or press the restart button" I then reinstalled OS X and was able to see everything on the back up drive but I am needing the full system back up due to programs and the like. Any suggestions? Thanks

Hi, and welcome to the forums.
You're describing a +*kernel panic.+*
There are four main possibilities:
The new drive was not set up properly. See Kappy's post on +Extended Hard Drive Preparation:+ http://discussions.apple.com/thread.jspa?messageID=10768743&#10768743
There was something else wrong with the hardware besides the internal HD. Run the +Apple Hardware Test,+ on one of the discs that came with your Mac. It will have instructions printed on it in very tiny type.
Your backups are corrupted. While booted from your Leopard Install disc, use +Disk Utility+ to do a +*Repair Disk+* (not permissions) on your TM drive.
The problem with the hard drive corrupted something on it, which was copied to your backups. Try the restore again, from an earlier backup.
If none of those works, post back with the results and we'll try a workaround.

Macbook Pro will not load OS and will not boot from Install Disk

When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
synchronizing disks... Killing processes
then it says some other stuff to fast to read.
When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
Not sure if I left anything out
-bryce

Welcome to Apple Discussions.
Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
Message was edited by: Rick Lang

MacBook Pro will not load Final Cut Studio 2 Install disc?!

So, this is the first time in all my years as a Mac user that I haven't been able to find info online about a problem I'm having with my machine.
Firstly, I've never had optical drive issues. Secondly, all other disks I try are still loading and playing perfectly (including other disks in the FCS2 box, e.g. the tutorials).
BUT when I insert the Final Cut Studio 2 Install disc, the drive sounds like it's trying to load the disc over and over, but it never gets spinning properly. The disc doesn't appear in my finder and after about 30 seconds my MacBook just spits it back out.
I've restarted, I've closed all other apps etc. but nothing helps.
Also, this same disc works fine in my parents' 17" MacBook Pro...
Please someone tell me what the **** is going on
Message was edited by: JesseMcC

You have probably already done it but ensure you have updated the OS and Quicktime prior to attempting to instal Final Cut Studio.
I recently had a hard drive crash and after installing the new hard drive it would not read the OS installation disc. I ended up using an external drive case and installed the OS on the drive from a different Mac Book, then reinstalled the hard drive in the other Mac Book. Then it booted right up. I updated all the original software before attempting to install any additional software.
Everyone kept saying it wouldn't install due a possibly defective optical drive and I can't say why but it wasn't the drive. As soon as I had the system up and running again the optical drive functioned flawlessly.
I hope this helps you.

My Macbook Pro will not load from Snowleopard Install disc

I have been having some issues with the speed of my mac, and yesterday decided to reset from the install disc.
Every time I try to load my mac from the disc it shows signs that it's reading the disc, but then ejects it and goes straight to the screen with the apple logo and cogwheel, where it gets stuck.
I cannot get past the cogwheel screen, i have reset PRAM and SMB, with no success.
Holding the option key does not help as it doesn't acknowledge the disc, and i have checked the disc, it is scratch free, an it d the drive is clean.
When running hardwear test it shows up 1 error with my harddrive, (the reason i was resetting from install disc in the first place.)
HELP!

The error is for a sensor, so that should not indicate a problem with the HDD. As for your installer disc the Mid-2009 MBP 13" came with Leopard, not Snow Leopard. You might check what is printed on the disc label just to be sure.
I don't know why the disc won't work. It could be an alignment problem with optical drive or something on the disc's innermost tracks. It can't hurt to get a lint-free cloth and clean the disk with alcohol.
You might try turning off the computer and wait a few minutes then restart it. Put the disc in before you shut it down. Then when you restart the computer press and hold down the "C" key immediately after the chime.

My MacBook Pro will not load Yosemite

I received a message telling me the latest software was available for my Mac.
I downloaded it then the laptop closed down to re-install. It ran all night but still shows only half completed .
I switched off and left off for a while. I now have a laptop that keeps trying to load the software, stopping halfway through.
I can't force quit now don't know what to do. Thanks for any help anyone can offer

I received a message telling me the latest software was available for my Mac.
I downloaded it then the laptop closed down to re-install. It ran all night but still shows only half completed .
I switched off and left off for a while. I now have a laptop that keeps trying to load the software, stopping halfway through.
I can't force quit now don't know what to do. Thanks for any help anyone can offer

My macbook pro will not load. The screen stays stuck at the apple loading signal.

I tried booting it up in safe mode, but a loading bar appears on the bottom, starts to fill, and dissapears again, leaving just the apple and the spinner.

What backups do you have?

My MacBook Pro will not load you tube videos

I get a black screen with an error message plug in blocked

Go to Adobe's website and use their uninstaller for FlashPlayer. Then return and install the latest version of FlashPlayer.

My macbook pro will not boot up its like my password is wrong? What can I do to fix it?

My macbook pro will not load opperating system. When I enter my password it just goes back to enter password screen. Like my password is wrong but it's not. How do I fix this problem?

Consider resetting your password:
http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
Ciao.

My macbook pro will not get past the gray screen with the apple logo and a loading bar.

My macbook pro will not get past the grey screen with the apple logo after attempting to load for hours. I have already tried resetting the NVRAM/PRAM and a couple other tricks and no luck. Anyone out there have suggestions for my problem? Help would be much appreciated since i use my computer for everything at school and i am in desperate need to get this baby working again.

You didn't say which OS in your tag, but maybe you might find something here.
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/PH4191
http://support.apple.com/kb/PH7213
http://support.apple.com/kb/HT4125
http://support.apple.com/kb/HT2213

Macbook pro will not let me burn or load cd or dvd ejects them

my macbook pro will not let me burn or load cds or dvds. It ***** them in, and then ejects them. Have tried blank, music, video.
Wassup?

Hey there Kathi,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that can help you resolve the issue burning CDs and DVDs on your MacBook Pro.
Mac OS X 10.6: Solving problems with burning discs
So long,
-Jason

My MacBook Pro will not load

Similar Messages

Maybe you are looking for