My MacBook Pro will not start up, any suggestions?

My MacBook Pro will not boot up. I was aware of something odd when I switched it off a couple of hours ago now when I push the 'on' switch something starts - fans I think, and the little indicator light on the front. Does anyone have any suggestions on how to solve this problem?

I had the same issue I bought my MacBook Pro in Jan. my harddrive was bad and they had to replace it. I know the guy held down the shift botton for a little then pressed the power botton while still holding down the shift botton and it turned on but not completely since my hard drive was bad.

Similar Messages

My macbook pro will not start up or turn on. any suggestions?

My macbook pro will not start up or turn on. Any suggestions?

I had the same issue I bought my MacBook Pro in Jan. my harddrive was bad and they had to replace it. I know the guy held down the shift botton for a little then pressed the power botton while still holding down the shift botton and it turned on but not completely since my hard drive was bad.

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

My MacBook Pro will not start up after entering correct password.

My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.

Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz

MacBook pro, will not start up- drive begins

MacBook pro, will not start up- drive begins?

OK, then try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Since you can boot into safe mode successfully, I'm assuming the problem may be with a bad third-party extension or plug-in (such as a driver for third-party hardware or a bad Flash plug-in, for example.) It can also be a problem with a bad cache or preference file. If the above doesn't help then use a utility like Lion Cache Cleaner 6.0.5, Cocktail, TinkerTool Sys..., or OnyX to clean out user, system, and font caches.

My macbook pro13 will not start up any ideas?

My MacBook pro will not start up it worked perfectly well a few minutes ago now when I press the start button nothing happens powered by the mains a full battery any ideas please?

Intel-Based Apple Portables: Troubleshooting a computer that will not power on

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

My MacBook Pro will not start up - it was just on last night - what do I do?

My MacBook Pro will not start up. I used it last night and it was fine. What should I do?

Try a SMC reset.
http://support.apple.com/en-us/HT201295
Do you get anywhere in the startup sequence?
Ciao.

My macbook pro will not start up. stuck on grey loading screen and spinning dial. HELP

my macbook pro will not start up. stuck on grey loading screen and spinning dial. i shut it down last night and now when i try to turn it on it will not get past this page. lights and sounds work but nothing happens. please help

Power it down by holding the power button down. Then try to power it up again. Post back. It would help if we knew what OS you are running, the model MBP...

HT1379 My Macbook Pro will not start at all. I automatically get the Apple Icon and a pinwheel that keeps clocking. How do I fix?

If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

The Macbook Pro will not start past the grey Apple logo screen? Any help will be most welcome?

The Macbook Pro 13, late 2009 will not start past the grey Apple Logo screen? Any help will be most welcome? Thanks

Have you tried booting with the install disc that came with your computer?
Find it and then run Disk Utility to verify your hard drive. If errors are found, try to repair the disk.
It sounds as if the hard drive might be failing.
Clinton

Macbook pro will not start after login

My MacBook Pro (late 2011) with Mountain Lion OS will not start up after my login. All I get after logging in is the spinwheel forever. It will start from guest user. PRAM reset doesn't help. Any suggestions?

Adam,
Try a safe boot, power up holding the shift key note this will take longer so be patient hold the shift till you see the progress bar and try to login. If it works try logging out and logging in normally.
There are some updates availabe that you might want to install.
see here
http://support.apple.com/kb/TS4476
you should probably install yhis update as well
http://support.apple.com/kb/DL1640

My macbook pro will not start after pressing the power button

I have bought a macbook pro last year and now, I have a great problem since a few months.
My macbook does not boot up, I hear no fan noices and no LED lights are blinking...
Battey is full, but nothing happens (means system will not start up).
I have also tried to start with the Power button - but the similar effect "NOTHING HAPENS".
What I don't understand is, if I do nothing for one or two days and press then the power button, the system will start up and full functionality for a few days.
And anytime I get the same problem again... and must wait also for a few days.
Can anybody support me please.
Thank you all in advance and looking forward to a fast reply.

Try reseting SMU as suggested in link below
http://support.apple.com/kb/ht3964
Allan

My MacBook Pro will not start up. Is there anything that I can do to see if I can start it up before I need to go in for an appointment?

My MacBook will not start up. The only response I can get out of it is the battery light on the side which shows it as being full. Is there any wizardry that will magic it back to life by a sequence of buttons or something?

Try holding the power button down for ten seconds and then try booting it.
Try to reset SMC. http://support.apple.com/kb/HT3964

My MacBook Pro will not start up and it is just showing the grey screen?

My Apple Mac book pro is not starting up ,the screen is grey

If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion/Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My MacBook Pro will not start up, any suggestions?

Similar Messages

Maybe you are looking for