My MacBook Pro will not start up. Is there anything that I can do to see if I can start it up before I need to go in for an appointment?
My MacBook will not start up. The only response I can get out of it is the battery light on the side which shows it as being full. Is there any wizardry that will magic it back to life by a sequence of buttons or something?
Try holding the power button down for ten seconds and then try booting it.
Try to reset SMC. http://support.apple.com/kb/HT3964
Similar Messages
-
My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components. -
MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?
There is always the forum for MBP
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro -
It was running slow with the colored spining appearing often. This started happening weeks ago with Yosemite so I formatted the disk with the DVDs that came with the mid 2011 MacBook pro, 10.6.8. I then installed Yosemite on an external drive and this morning i was booted from the external hd with Yosemite and it stopped recognizong mouse clicks so I forced a restart and now I'm stuck with the blank grey screen. Safe mode and verbose mode also do not work.
Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
My Macbook Pro will not cut on or do anything really
i was using the bookcamp helper the Laptop restarted and just stopped working all together. im lost i dont know what to do from here
What is bookcamp helper?
-
Sleep light is on but MacBook pro will not power up
Sleep light is on but MacBook pro will not power up
Hi a,
If the sleep light is already on when you try to start up, that means the MBP isn't shut down, so cannot start up. Hold down the power button for 5-10 seconds to shut it down, then try starting up. -
HT1386 selected itunes on macbook pro will not sync to iPad
selected itunes on macbook pro will not sync to ipad
Might there be an ownership issue --- such as:
Might the tunes that do not sync to the iPad have been purchased using a different Apple ID and password than are either used on the iPad or authorized on the computer's iTunes?
Remember, purchased music is protected. It cannot be indiscriminately shared. -
My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.
What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton -
Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.
Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions. -
If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
My MacBook Pro will not start up, any suggestions?
My MacBook Pro will not boot up. I was aware of something odd when I switched it off a couple of hours ago now when I push the 'on' switch something starts - fans I think, and the little indicator light on the front. Does anyone have any suggestions on how to solve this problem?
I had the same issue I bought my MacBook Pro in Jan. my harddrive was bad and they had to replace it. I know the guy held down the shift botton for a little then pressed the power botton while still holding down the shift botton and it turned on but not completely since my hard drive was bad.
-
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
My macbook pro mid 2012 will not start up. I was running bitdefender and when I went to see if it was done, I had the apple logo and the loading (winding circle) on the screen. I can not get out of this. I used my back up external drive and it did nothing. It did light up.
samnleosgpa,
you may have faulty RAM. Are you able to boot into your MacBook Pro’s Apple Hardware Test (“AHT”)? If so, try running it to see if it can detect a problem. If you’re not able to run its AHT, and you’ve upgraded your MacBook Pro’s RAM before, try reïnstalling its original RAM and see if you can get past the “-6002F” error code. If you aren’t able to run its AHT, and you haven’t upgraded its RAM or you no longer have its original RAM, then I’d recommend that you make an appointment at your nearest Apple store to have them diagnose the problem. -
My MacBook Pro will not start up after entering correct password.
My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.
Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz -
After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail
Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.
-
Macbook pro will not complete start up
Macbook Pro will not complete the start up....am left with a grey screen showing the apple logo and a bar that shows only a third of the start up process as being completed.
Try:
Mac OS X: Gray screen appears during startup
BTW, this is the Mac Pro desktop forum
Maybe you are looking for
-
How can I get my music to play.
-
Hi, I was wondering if XMP is capable of holding an array of multiple objects. We have historical data that is represented with multiple fields. The normal schema would look like: <rdf:Description rdf:about="" xmlns:nef="http://ns.phics.com/nefclie
-
How do you call the same parameters from function to function
I need to create several functions to try and consolidate and clear up readability in my program and I need to call the same things in all the functions. How do I do that without writing everything I need to call in each function?
-
The use of Cond type tab in Pricing procedure determination
Hi Guys, In T-code:OVKK we are doing the pricing procedure determination. But ther is one tab called as :CType(Cond Type) there in that screen after our pricing procedure. Could you please some one tell me what is the use of this cond type and where
-
How can i verify that this is a legitimate seller of apple products.
Sales in large bulk, older apple products. See link http://www.aakash.com.sg/index.php?option=com_virtuemart