My Macbook Pro will not stop loading at the start up page!

you know the start up page that appears when you press the power button, the blue ish white one with the apple logo on the middle and a circular loading thing? Well mine won't stop loading. I left it on all night and it still hasnt finished loading. Its the circular one that just goes around and around. Helpme! Wjat should I do??

Seeing the white, blue or gray screen with spinning thing for too long is a sign of trouble
It's called the "gray screen" and you can hopefully hold down the Shift key on a wired keyboard when rebooting to let the machine enter safe mode, then backup your data off the machine in case it's a failing hard drive and then go around uninstalling, updating reinstallling all your third party software.
If that doesn't fix it then a #18 Reinstall Just OS X usually does the trick too
go through the steps here one by one or have someone take a look at your machine
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive

Similar Messages

Because in my macbook pro will not let me open The Sims 3?

because in my macbook pro will not let me open The Sims 3?
Whenever I try to open the application icon starts jumping and then disappears

Says it works with 10.7, problems with 10.8 though.
Reinstall the program and trash the Dock icon, then make a new one and see if that works.
Then Trash it's preference file and relaunch the program to create a new one
Deleting the System Preference or other .plist file
If not then run through this, could be a sign of something bigger
..Step by Step to fix your Mac

HT3964 My MacBook Pro will not boot up. The screen remains dark although the the comput makes the characteristic start up sound. The sleep light is showing.

MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?

There is always the forum for MBP
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

HT4628 My macbook pro will not automatically reconnect to the wifi after a sleep. This has started after having upgraded to mountain Lion (10.8).

Hi
After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
Thanks
Eitan

Try making a new network connection and renewing the DCHP lease as detailed here:
fix-os-x-mountain-lion-wireless-connection-problems

My macbook pro will not turn on and the charger is not lighting up

please help!! my macbook pro will not turn on at all, when i plug in the charger it will not light up at all, it suddenly shut down when i was using it.

Is there any charge left in the battery?
Press the button on the left side, near the front edge. If no green lights appear, battery is flat. And if the power brick ain't workin' (by virtue of its pilot light not glowing), then it will remain flat and the computer will not power up. If this is the case, maybe try with another power brick of similar size and see if it charges.
Else the logic board is toast and pitbull's on the money.
Either case, my gypsy crystal ball forsees a trip to an Apple Store or a Service Provider in your future...

My pro will not stop loading ...

hi,
i have a mac book pro that's a few months old. last nite the software was updating and it looked like it would take a while and so i quit and it didn't seem to stop........i waited it and decided to restart (by pressing the start up button for a bit to shut down and then started up again) and when i did go back on it would not stop loading.......the mac intel update that i had been updating was to take a long time (about an hour at the longest) so i let it reload for about an hour and it never stopped........i shut it down again for a while and did it again and still nothing......same for this morning.
i do not have apple care and am past the 90 day tech help so i guess the option would be to send it back to apple because my warrranty is still good......before i do i thought i would try here and see if anyone has any ideas.....like inserting the original software and do that start up thing by hitting certain keys.........i just don't want to void the warranty...any ideas?

Sounds like you had a corrupted system prior to updating. You may be able to restore without erasing the hard drive.
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Note: Do the following to repair the hard drive.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

MacBook Pro 2008, won't go past the start up page, just keeps telling me to restart

I have a MacBook Pro 2008, it freezes then has pink pixels, restarts but then says I need to restart it again but it never gets past the start up page, just keeps telling me to restart again. I've tried taking out the battery and plugging it in, I'm not sure what else to do

Don't know about the pink stuff....
You may be experiencing a Kernel Panic, as shown in Apple doc. #HT1392. If not disregard
Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset. Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.  Good Luck! DALE

MacBook pro will not charge even when the charger is plugged in and working

So this is a strange one.
I have been using my MacBook pro for a lot of film editing and motion graphics. Recently, I noticed that my battery kept going down, even when charging. I thought nothing on it and kept using it. After around 4 hours, the battery went from 90% to 23% WHILE plugged in. This got me nervous. When I plug in the MagSafe charger, the light comes on and I get the "charging" symbol in my toolbar. The light turns orange and then, after a few minutes, the power starts to go down instead of up.
I have had this laptop since Christmas 2012 and this has never happened before. The laptop does charge, but only when I am running no application, when the screen is shut or when the laptop is powered off. Bear in mind that right now, I am on Firefox, that is the only application open, yet the charge is still going down. I assumed it was because I was using Premiere CS6, After Effects CS6 and Cinema4D, but now even when they are not open, the batter will not charge when I am using the laptop.
What is going on? Is in the charger? Any help would be greatly appreciated and I am starting to stress!
Thank you everyone for reading,
-Rory Campbell
UPDATE: I am currently only running Firefox and Finder. Now the laptop is charging as usual. However the second I open up Premiere, After Effects etc, it goes down. I have no idea what is going on!

Try resetting the PRAM and SMC. If you don't know how to, don't worry. They're very easy to reset. Just google how to do it. If that doesn't work, the only thing I would suggest is to take both the laptop and the charger to your local genius bar to have them examined. If it's less than a year old, apple should replace whatever is wrong with it as long as it was a factory defect.

Macbook Pro will not stay connected to the internet

It appears that I am not alone in this problem, but none of the troubleshooting is helping.
There seems to be no trigger, but randomly 0-10 minutes the internet stops working on the Macbook. Sometimes restarting the wireless helps, most of the time it does not.
I know that my network/internet are working fine because all of our other devices stay connected with the Macbook drops. Is there a easy fix that I missed?
Thanks,
Mike

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

MacBook Pro will not accept anything in the disc drive?

I have tried every kind of disc possible about 10 times each. CD's/DVD's/Even PC Games. All on different discs every time.
My MacBook will only accept the disc for no more than 5 seconds, making a noise like it's trying to read it and then stops, and then reboots itself again, repeat 3/4 times and then ejects the disc out.
Previously it was having trouble ejecting the discs every now and then, but I just lifted the laptop on its side to help encourage it to eject.
I have tried the troubleshooting tests (shutting down, holding the D key) and it says that everything is fine. I'm worried my hard drive may be dead, but I don't see how when I have hardly any data on the laptop. 80% is all in a portable hard drive.

maddiison wrote:
Will this get stuck in the slot though?
Possibly.
And how do I shoot compressed air into it… using a hairdryer on cool or something? (I'm hopeless at tech, sorry)
One can purchase compressed air in a can.
http://www.amazon.com/b?node=3012916011
Ciao.

My Macbook Pro will not update. it says: The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012). What do I do?!

Please help

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Apple mail in my MacBook Pro will not stop twirling. Cannot distinguihs gmail accounts.

Could any body tell me how to stop Apple Mail InBox from loading? Emails from different accounts are not showing because the InBox keep twirling.

I don't understand what you mean by twirling, but I assume you have difficulties opening and/or working with Mail.
If so, you can try to rebuild your Mail index.
Before that however, repair your permissions and verify your disk. Do this from Disk Utility found in the Utilities folder. Select your hard disk (the first one top left) and click repair permissions. Then click verify disk.
If that did nothing, try this:
Follow these instructions http://docs.info.apple.com/article.html?path=Mail/10.7/en/mail14019.html
Take backup of the files you are about to remove or drag them to the desktop and start mail normally.
Says it is for Lion (I see you run Snow Leopard) but the files are the same.

My Macbook Pro will not find or use the downloaded driver for my new Canon Pixma MX479 wireless printer

I have been fussing for hours with a Canon Pixma MX479 printer I received as a gift. The printer was obviously designed for PC control, and has terrible instructions for setting up the wireless capability, but I finally found a few hints online about how to add a WPS printer to my Airport Extreme, so I can finally detect the printer. However, when I try to add the printer, either under System Preferences or while just doing a print, my MacBook requires that I download a driver from Apple to use it. When I attempt to do that, I get a message the driver software is unavailable from Apple and that I should contact the manufacturer for the driver. I have already downloaded and installed the Mac OS driver from Canon twice, but my MacBook apparently can't find it. So I am forced to use Airprint in order to communicate with the printer. I would like to use the proper software to make sure I am accessing all of the features the printer offers. Can anyone tell me how to associate the downloaded driver with my printer when I am attempting to add it?

Hi Dwntso!
Welcome to the Canon Forums and thanks for posting!
So that the Community can help you better, we will need to know any error messages you're seeing either on your computer or the printer, and the version of OS X you've got on your MacBook as well as the way you intend to connect to your printer (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!

MacBook Pro will not boot up, stops at Apple logo

My daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off. Any ideas or suggestions would be appreciated.

The internal HDD will have to be replaced. Since you cannot get the MBP to acces the internal HDD, you will have either use Target Disk Mode:
http://support.apple.com/kb/HT1661
Or take out the HDD and place it in an enclosure and then connect it to the MBP via USB. (After you have installed the new HDD and the OSX)
You may or may not be able to get information off of the HDD.
Ciao.

My macbook pro will not turn on

My Macbook Pro will not turn on. The battery is fully charged. It shut down by itself. Help!

Read here
https://discussions.apple.com/docs/DOC-3046

My Macbook Pro will not stop loading at the start up page!

Similar Messages

Maybe you are looking for