My Macbook Pro will not update. it says: The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012).  What do I do?!

Please help

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Similar Messages

  • Software Update App Store 10.8.2 Error - The operation couldn't be completed (NSURLErrorDomain error -1100.)

    When trying to run a software update in 10.8.2 from the App Store I recieve the error - The operation couldn't be completed (NSURLErrorDomain error -1100.)
    Any help would be appreciated.
    Thanks
    Anthony

    I found the answer by looking over towards the right on this page...to the More Like This section.
    The answer is that this indicates a server overload with Apple's App Store server.  Give it some time and try again.
    Here's the link where this was discussed:
    https://discussions.apple.com/message/19553195#19553195

  • HT1338 MacBook pro will not update past 10.5.8

    What can I do if my MacBook pro will not update past OS X 10.5.8
    When I check for software updates, it says there are no updates and it is up to date.

    OS X 10.5.8 is the last update for that version. If you need to go to a OS X 10.6 then you are going to have to purchased a DVD for the upgrade.
    Allan

  • Because in my macbook pro will not let me open The Sims 3?

    because in my macbook pro will not let me open The Sims 3?
    Whenever I try to open the application icon starts jumping and then disappears

    Says it works with 10.7, problems with 10.8 though.
    Reinstall the program and trash the Dock icon, then make a new one and see if that works.
    Then Trash it's preference file and relaunch the program to create a new one
    Deleting the System Preference or other .plist file
    If not then run through this, could be a sign of something bigger
    ..Step by Step to fix your Mac

  • When trying to move email messages to trash I get a pull down box that says 'The operation couldn't be completed. File exists'

    when trying to move email messages to trash I get a pull down box that says 'The operation couldn’t be completed. File exists'.
    so I'm not able to move read messages to trash folder

    Back up all data. Rebuild the named mailbox. Try to delete the message again.

  • HT3281 I am having issues watching certain podcast it says the operation couldn't be completed nsurlerror domain error 1013

    I am having issues watching certain podcast it says the operation couldn't be completed nsurlerror domain error 1013

    Open the Mail, Contacts & Calendars preference pane in System Preferences, and select Facebook. Make a note of the settings for the account, then delete it from the list.
    Then follow the instructions on this page: Resetting the SyncServices folder.
    Log out, log back in, and recreate the account settings in System Preferences. See whether there's any improvement.

  • HT3964 My MacBook Pro will not boot up. The screen remains dark although the the comput makes the characteristic start up sound. The sleep light is showing.

    MY MacBook Pro will not boot upThe screen is dark, but the sleep light is on and it makes the characteristic start up sound.What is wrong?

    There is always the forum for MBP
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • HT4628 My macbook pro will not automatically reconnect to the wifi after a sleep. This has started after having upgraded to mountain Lion (10.8).

    Hi
    After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
    Thanks
    Eitan

    Try making a new network connection and renewing the DCHP lease as detailed here:
    fix-os-x-mountain-lion-wireless-connection-problems

  • My macbook pro will not turn on and the charger is not lighting up

    please help!! my macbook pro will not turn on at all, when i plug in the charger it will not light up at all, it suddenly shut down when i was using it.

    Is there any charge left in the battery?
    Press the button on the left side, near the front edge. If no green lights appear, battery is flat. And if the power brick ain't workin' (by virtue of its pilot light not glowing), then it will remain flat and the computer will not power up. If this is the case, maybe try with another power brick of similar size and see if it charges.
    Else the logic board is toast and pitbull's on the money.
    Either case, my gypsy crystal ball forsees a trip to an Apple Store or a Service Provider in your future...

  • The operation couldn't be completed. (kSMErrorDomainLaunchd error 6 - The specified job could not be found.)

    Boot camp 4, When download win7 support software problem " The operation couldn't be completed.(kSMErrorDomainLaunchd error 6 -The specified job could
    not be found.) And unable to download "Can'tinstall Windows Support Software because it is not current available from the Software Update server.

    First try changing your network settings for the interface it uses and disable auto proxy setting.
    It is a configuration issue. And yes it could all be "solved" with a simple 600MB direct download link in under 10 minutes.

  • Any ideas on and error that says:  The operation couldn't be completed. (com.facebook.sdk error 2.)

    I got an error stating: the operation couldn't be completed.  (com.facebook.sdk error 2.)  Any ideas on what is wrong?

    10shamrocks wrote:
    I got an error stating: the operation couldn't be completed.  (com.facebook.sdk error 2.)  Any ideas on what is wrong?
    Not really. Never used Facebook. I'm perfectly content without social media.

  • My macbook pro will NOT update...help!!!!!!

    My Macbook Pro refuses to update... and I can tell its running slow and not handling my Music Recording files to well.
    It wont let me download Mountain Lion or anything else.
    When I do the softwear update, It just restarts and it does NOT update anything!!!
    I really need help.

    My Macbook Pro refuses to update... and I can tell its running slow and not handling my Music Recording files to well.
    It wont let me download Mountain Lion or anything else.
    When I do the softwear update, It just restarts and it does NOT update anything!!!
    I really need help.

  • My new macbook pro will not download Mavericks, says it does not meet system requirements. Help!

    Mavericks will not download on new macbook pro. says it does not meet system requirements. What?
    Thank you! Sales associate said it needed to be downloaded. I am new to Macbook. Thanks again!

    It already has Mavericks installed on it. There's nothing to download.

  • MacBook Pro will not update to 10.5.5

    Software update will not install 10.5.5 on my 15" MacBook Pro. The software downloads but after it restarts the installation (bar) just sits and does not progress. I have never faced this with updates before. I have let it run for 1/2 hr and it doesn't progress. Any hints as to what is going on?
    To get out of this I have to power down and reboot into 10.5.4

    Resolved problem. The software updater obviously created a corrupt download file. When I went to the download web site and manually downloaded the update I was able to perform the update.
    Apple needs to modify the software updater to give an option to re-download a file(the update). Rerunning the updater does not download the files again.

  • My macbook pro will not update new OS X

    my MacBook Pro--15" late 2011, running yosemite 10.10.1
    is running well, but, it cannot update to the new version of os.
    Everytime I restart or shut down and turn back on, I get a screen where it says, under my user name, that I need an update.
    I enter my password, hit enter, then it goes into a load bar, boots up to my main screen and has a pop up reading: "cannot install update, DNS(server) error"
    what is going on?

    Try using Google's DNS servers
    https://developers.google.com/speed/public-dns/docs/using

Maybe you are looking for

  • Sub vi used in main vi

    Download this .zip and extract all files to a folder, used LabVIEW v9.0f2. I want to use Light Show as a Sub VI to Furnace Cycle MAIN1 (Front Panel) - I need to use this Sub VI (sub of one light control) with many light on the Furnace Cycle MAIN1 fro

  • Regarding Registration of OA Page in the Application

    Hi, When i registered the OA Page in the application i am getting the following error, can any one suggest me whats the actual problem. The steps which i followed for the registration of the page are: 1. I Ftp'd the class files to the proper director

  • How can I stop Quicktime movies opening my web browser?

    Sorry if this has allready been brought up but I spent an hour searched the forums for an answer (And longer on google). My issue is that certain unsavory people seem to be exploiting an ability of quicktime to launch the default web browser and goto

  • Portal installation fails

    Hi, when i was installing portal... i get the error An error occurred during the installation of component sap netweaver '04  sr1>Netweavercomponents running on java>platform>portal installation.Check the logs when i chcek the logs "INFO 2011-06-03 1

  • CM 14 and BI Publisher

    I am currently using CM 14 and BI Publisher for the reports. When I create a report, it makes all of the sentences run back to back, even if I have pressed enter between sentences and spaced them out in CM 14. Is there a way to format this to make it