My Macbook Pro Won't boot. Unable to find the driver for this platform

Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
          Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!

Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.

Similar Messages

  • How can a fix my macbook pro with a Panic Kernel "Unable to find a driver for this platform"?

    After a required update, my computer shutdown and it has never start ups again! On the screen apears a msg saying
    " Unable to fins deiver for this platform" \"ACPI"\ .\"@/Sourcecache/xnu/xnu-2050.20.9/iokit/Kernel/IOPLatformExpert.ccp:1548
    Debugger called: <panic>
    backtrace (CPU 0), Frame: Return Address ...

    You've posted this in the iPad forum.

  • My macbook pro won't boot, I just get the apple logo but no progression.

    P.S. (pre script)
    I'm in the UK
    I think my macbook's Hard-drive is capooot, here's my symptoms, windows takes 10-15 minutes to boot and when it does every program I open becomes non responsive every 20 seconds or so, so it's unusable. I've tried playing Arma 2 (which use to run fine) and windows gives me an error about cyclical redundancay checks failing (which is apparenty a HD error) and OSX boot at all (I've been waiting 2 hrs and it won't get past the apple logo). when OSX did boot some of my apps in launch pad didn't have a logo on them (presumablly because they didn't load).
    anywho, I ran a disc fragmentation analysis in windows (despite not trusting windows to fix any of my problems ) and it said 22% fragmented but I only installed windows about a week ago (and have only 1 7GB file I think).
    I have had troubles installing windows and have had to re-install it twice, each with progressivly more trouble, 1st time, bootcamp installed it for me (easy!). 2nd, bootcamp couldn't partition it, however disc utility managed it . 3rd time, neither could partition it (probably due to fragmentation I presume) so I had to back up OSX, erase my HD, partition it, install OSX, restore OSX files, install windows 7.
    Anyway, does this appear to be a HD problem? My mac is about 8 months old so I still have 28 months left of my warranty (I got a free 3 year warranty because I'm a student, top tip people ) So what do I do to hopefully get a replacement HD? WHAT'S THE NUMBER? (I capslocked because the thing is long and that's the main point).
    I've tried the express lane thingy but the page doesn't load when I enter my serial number (I've even downloaded safari on my mum's computer to see if it'll load on that) :/

    The three beeps mean, I think, self-test has found memory problems.
    Barry

  • I have a Macbook pro 4,1 My Battery would not charge after only 23 cycles. I tried the battery update now my macbook will not boot. it has a kernel panic Unable to find driver for this platform:

    Macbook 4,1
    Early 2008 15" macbook pro
    Running Snow Leopard
    the Battery was not working after only 23 cycles
    I tried the Battery update and now it will not boot at all
    I really do not want to loose my data on the drive
    panic message is
    Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
    Please help

    Panic Message
    panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
    "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
    Debugger called: <panic>
    Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
    (7 lines of hex)
    BSD Process name corresponding to current thread: Unkonwn
    Kernel version:
    Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
    I tried to boot from CD can, but i dont want to loose any information.
    Tried disk tools
    Hardware test
    Tried to check if it was memory sticks failing or battery , nothing else plugged in
    if i boot holding Apple key and S
    I get additional warnings about AppleACPIPlatform and not being able to load Kext

  • MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    Read this article...
    http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

  • Macbook pro won't boot - how do I retrieve emails?

    Hey guys
    I've got a common problem that my Macbook pro won't boot. Sometimes I get stuck on the grey screen with spinning wheel, sometimes on the blue screen with spinning wheel
    I've scoured the internet on another machine and tried every trick I can find with the MacBook Pro including
    Disk / Permissions repair from install disk (says the HD is fine)
    PRAM
    Single User
    Soft
    It seems like my only option at the moment is an Install and Archive. I can mount the MacBook Pro on another machine with a firewire and remove files and backed up a lot on a hard drive before it died
    What I am worried about is how to retrieve some emails from the machine that only exist locally because I have deleted them from the server
    Is there a way of doing that?
    Would Migration Assistant work?
    If anyone could help me with this or suggest any other methods for bring my machine out of a coma I'd really appreciate it
    d

    Try a different adapter. If you don't have access to a known-good adapter any other way, make a Genius Bar appointment at an Apple Store.

  • Macbook pro won't boot, stuck on white apple screen

    Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
    I've powered down and tried to boot up several times.
    I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

    Exacty what happens when you try to boot up from the disc that came with your computer?  Are you holding down the c key?  Have you tried holding down the "option key?"  Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
    If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems.  It's what you're paying them for.
    Out of warranty - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • MacBook pro won't boot up Keeps turning off

    MacBook pro won't boot up.  When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons.  Just started happening.   Ran hardware test and all shows ok.  Any ideas??

    Thanks for all the help; however, I still continue to have problems booting off of any other media.
    I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
    I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
    Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
    Thanks again,

  • Macbook pro won't boot after installing update 10.9.3

    macbook pro won't boot after installing update 10.9.3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

    My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

    Odd how this hasn't been archived yet.
    I'm getting the same thing with my Macbook, but can't boot past the white screen. An Apple store in KS suggested I needed a new hard drive, but I've already put two in there and it's still doing the same thing. I really don't want to buy another motherboard like I had to a couple of years ago.
    My choices are either buy a cheap drive to boot from and remove the current one to put into an external case, or save the money by not buying a new motherboard and putting it as a down payment toward a Mac mini.

  • My MacBook Pro won't boot and apparently my HDD is locked

    My MacBook Pro won't boot up. And it's says my HDD is locked when i try and reinstall OS. Help me please good people.

    you want to check how many threads with same question first, and look in
    Mac OS version forum that you have; and the notebook MacBook instead of the workstation forum for Mac Pro (non-laptop)
    Not a lot of detail to go by with "won't boot" though.
    Mac OS X Help
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Assume you know what your OS, how to use the Recovery Mode, and how to repair or do Safe boot and other tasks.
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
    Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems: Apple Hardware Test
    General Mac maintenance: Tips to keep your Mac in top form
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • MacBook Pro won't boot up after interruption of update

    I interrupted the installation for the OS X Mountain Lion v10.8.2 and now my MacBook Pro will not boot up. Any suggestions besides calling Apple support or going to the store?

    Hi,
    I am having the same problem with my Macbook Pro. Did you manage to find a solution to this problem?

  • My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

    My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

  • I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  Error message: Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

    I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed.  It instructed me to hold power button to shut off and then press again to restart.  Same error message keeps coming up and computer won't boot to home screen.
    Error message:
    Panic CPU  0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
    \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
    Debugger called panic
    Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
    THANKS FOR ANY HELP.
    ROBB

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

Maybe you are looking for

  • Warning: [unchecked] unchecked call to getMethod when updating to JDK 1.6

    I'm received the following compilation warnings after I switched to Java 6 from Java 5: warning: [unchecked] unchecked call to getMethod(java.lang.String, java.lang.Class<?>...> as a member of the raw type java.lang.Class removeChangeListener = myPar

  • Mac not running mac programs

    All apple software has failed to function properly. It started with itunes not being able to open its libraries, as a result I have 6 corrupted itunes libraries in the span of 3 weeks. My safari just quits on me before it actually connects online. My

  • Function evaluation

    Hello, I'm facing a challenge task to do function evaluation in java. I need to write a function which take a string and a 2D array like following: public double[][] loopEval(String input, double[][] data) then, I need to parse the String based on fo

  • Why when I want to make a simple purchase, am I asked for personal info? Like a phone number.

    Invasion of privacy. I left the item rather than give up the info

  • Improving Zen X

    Has anyone heard anything from Creative regarding upgrading or improving the Zen Xtra? I've been looking to geet an MP3 player with a 60 gig hard dri've that can play WMAs for a while now, but after researching the player for a while I noticed that i