My Macbook pro won't install Windows 7, My Macbook pro won't install Windows 7

Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.

I would highly suggest restoring your Mac to factory settings. Back up all files on externL hard drive first. Then let the be the first thing u do. Should resolve issues. If computer is older and has been running under a certain operating system for a period of time it may not like the partition or may have corrupted files that restoring will wipe clean

Similar Messages

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

HT204048 Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.

Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.

Not using Boot Camp, but you should be able to using virtualization software such as Parallels to run Windows concurrently with OS X.

Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
And HDD is APPLE certified ( 250 GB )

Hello JashaCOLD,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows 8 won't install on my Macbook Pro, have installed Parallel Desktops 9.

Am trying to download Windows 8 onto my Macbook Pro. I've installed Parallel Desktops 9. The Windows download keeps telling me it can't download because the setup file is not supported by OS X. Parallel Desktops is telling me I can install Windows via a PC, DVD or image file. Does this mean I cannot install Windows by downloading it.

Am trying to download Windows 8 onto my Macbook Pro. I've installed Parallel Desktops 9. The Windows download keeps telling me it can't download because the setup file is not supported by OS X. Parallel Desktops is telling me I can install Windows via a PC, DVD or image file. Does this mean I cannot install Windows by downloading it.

MacBook Pro Retina won't install windows 7 64bit

Hi guys, i'm tryng to install windows 7 64bit but no success till now. I'm using an updated version ( service pack 1 integrated) when windows loads i can't install it on the bootcamp partition because it says"windows needs an ntfs partition to install" . Then i cancel that partition, create one new ntfs one, and try to install.... then windows tells me "Impossible to create a new system partition or locate an existing system partition. For further information, look at the program's registry files"
It seems to be an error caused by a defective driver of the controller of the hard disk.... so the controller of the ssd. Or is it something else? how can i install windows via bootcamp on the new macbook pro with retina display?

you format the FAT/MSDOS to NTFS inside the Windows installer.
Windows installer: Advanced Options tab.
You don't create, you just use the one "BOOTCAMP" that was created by Boot Camp Assistant.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

TS3196 i have installed windows 7 on my macbook pro with retina display but the internet won't work in Windows, please help!!

I have the latest 13" Macbook Pro with Retina Display. I just recently installed Windows 7 through Bootcamp assistant but when I am in Windows the internet doesn't work. How can I fix this??

I found where to download it in bootcamp, I just can't find my usb drive I will need to buy a new one and then give it a shot. I am sure I will be back to ask more questions... thanks for your help.

Can't install Snow Leopard on MacBook Pro - DVD won't mount

I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.

Can't install windows XP to a macbook pro with an Intel X25-M SSD

It's a strange problem:
We just bought some new unibody macbook pro 2.8Ghz machines, (4GB ram)etc. We also obtained some of the new Solid State Drives (SSDs) from Intel, the X25M-80GB.
(part number: SSDSA2MH080G1C5)
After installing the SSD into the macbook pro, everything works.....in OSX. Installation of 10.5.5 went without problem, all updates/firmware applied, everything works fine.
The problems start when you try to install XP. We used the boot camp assistant, and created a 32GB partition, put in a XPSP2 disk, and start the installation.
Everything starts up nicely and goes to the blue/white text based installer for XP. It loads drivers, and then reaches the point where it would ask you to select a disk to install to (where you would normally see the three partitions, 1 being the FAT32 you select as C:).
However, what you get instead is an error message that: +"Setup did not find any hard disk drives installed in your computer...."+ and then you have to exit.
If you use the original 320GB drive, everything works as expected, (nothing wrong with the laptop hardware, or the installation CD). If you stay in OSX, everything works as expected. (nothing wrong with the Intel SSD either)
To further add information, we also installed the Intel SSD into a Mac Pro (2008) as a second drive, booting to a windows installation (through boot camp) on the first disk. Windows boots fine, but there is no sign of the other drive AT ALL. (not a driver issue here - there simply isn't any hardware here as far as windows is concerned.)
That brought us to our conclusion that there is something awry in the BIOS/EFI
being presented to Windows, that doesn't support the Intel X25M drive at all.
However, there is no user customisation (or even access) to the settings or what's happening at that point in the boot cycle, so I'm unable to diagnose further.
Given the Intel SSDs are using their SOC (system on a chip), (I believe - but I could be wrong on that one) perhaps that just isn't supported by the EFI?
Would appreciate some advice on where to go from here? These SSDs cost about 1400AUD+ each, so we'd rather like to actually use them....
I suspect we're asking/requiring for an EFI update.
(to head off some questions: Yes, we've used different discs, and also different computers...The disk and hardware themselves are just fine. Also, the drive WAS formatted with a GPT paritition.)
Thanks!

From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

I have Macbook Pro 13" mid 20012. How to install Windows 8 onto the mac using DVD? 10.8.3

the title says it all.
i have windows 8 DVD and i would like to have a clear instructions on how to install windows 8. I dont understand the need for USB

Welcome to the Apple Support Communities
You need a USB drive to install the Windows support software. It contains all the drivers that your MacBook Pro needs, and you will have to install them after finishing the Windows installation. If you don't install them, a lot of things won't work: the wireless card, the sound card, the brightness, the trackpad gestures... Apart from that, you don't need it for anything else.
Apple has released the official steps to install Windows 8 on a Mac, so if you want, print this PDF > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Does anyone know how to install Windows 8 on a late 2008 Macbook Pro without a previous copy of Windows 7?

So, I'm trying to do a direct install of Windows 8 on my old Macbook Pro, but my machine isn't officially supported for Windows 8; I get an error message every time I try to use boot camp. I previously had Windows 8 running, but that was because I had upgraded it from Windows 7. Later on I ran into problems because I couldn't update to Windows 8.1 so I ended up deciding to just erase the partition and start over. Since then, unfortunately, I've lost the Windows 7 install disc I used and now it turns out Boot Camp won't help me do the install. Is there a way of manually installing Windows 8? Without the help of Boot Camp? Any help would be much appreciated. Thanks!

So, I'm trying to do a direct install of Windows 8 on my old Macbook Pro, but my machine isn't officially supported for Windows 8; I get an error message every time I try to use boot camp. I previously had Windows 8 running, but that was because I had upgraded it from Windows 7. Later on I ran into problems because I couldn't update to Windows 8.1 so I ended up deciding to just erase the partition and start over. Since then, unfortunately, I've lost the Windows 7 install disc I used and now it turns out Boot Camp won't help me do the install. Is there a way of manually installing Windows 8? Without the help of Boot Camp? Any help would be much appreciated. Thanks!

HT3258 how to install windows 7 on macbook pro

please help me.......i won't install windows 7 64 bit to my macbook pro ( last 2011 ) OS 10.8 (lion mountain)... allready i try for install but can't boot to windows and black screen......
thank's

Welcome to the Apple Support Communities
Open Boot Camp Assistant, follow the steps, insert the Windows USB or disc and restart. If your computer doesn't boot from the disc or USB, press Option key on boot and press the USB or DVD to start the Windows 7 installation. http://www.apple.com/support/bootcamp

Using USB for Bitlocker in a Bootcamp install of Windows 7 x64 Ultimate on early-2011 Macbook Pro

First of all some details on my current setup:
Macbook Pro 15" (early 2011) with a i7 QM processor and 8 GB RAM, Superdrive and HD installed
Mac OS X 10.7.3
Windows 7 x64 Ultimate in a Bootcamp setup
Existing partitions on HD are EFI, MacOS X, Bitlocker Startup, Windows
I removed "Recovery HD" after creating DVD image contained in latest Lion installer from AppStore.
What I got so far:
It took some time to find a way for Windows getting a second partition to be used for Bitlocker startup files. Using existing partition layout I replaced previously existing "Recovery HD" partition for Bitlocker partition in Windows (after taking dd-based image of Recovery HD).
Recently I tried to enable Bitlocker and continued to fail on Bitlocker System Check claiming to have no access on USB while booting. And that's my issue ...
I read about using Windows' diskpart to have a GPT partitioned USB stick containing single NTFS partition. I tried to achieve the same with disk management in Mac OS X though it was creating a hybrid MBR/GPT setup that wasn't recognized by Windows at all. Then I tried partitioning in Mac OS X to have GPT partitioning, used Clonezilla Live CD's gdisk to apply hybrid setup another time. I even tried to do the whole partitioning in Linux using gdisk, but Windows still didn't recognize the formatted partition on USB stick then. So, the only way found is using diskpart in Windows to get a GPT-based USB-stick with a single NTFS partition.
I put my startup key there (attributed as hidden, system file) and tried to restart several times. On every boot Windows is prompting for inserting valid startup key as it wasn't found. The partition is encrypted already and entering the printed 48 digits recovery key gets me in every time.
If I keep the stick inserted the boot is noticeably delayed, but it's instantly continuing as soon as I unplug the stick. So there is something processing the stick ... I tried different sticks, but hope it's not related to using one special stick since they are used to support similar (equivalent) interfaces, aren't they?
Don't tell me about using TrueCrypt or similar as I prefer to use existing software instead of adding 3rd-party software doing things the same way. And for True Crypt USB must be readable at boot as well. And previous trials with different approaches rendered all failing at some point of setup. Finally, I don't want to reinstall existing Windows as it keeps me from working even more.
Found some post regarding trouble with Lion installations (e.g. I can't use rEFIt ... it simply didn't show up and this seems to be related to using Lion), found the KB article of Apple on preparing USB external storage for use at boot, but all troubleshooting hints didn't help.
What the heck is wrong with this setup?
EDIT: There is no problem to have Bootcamp starting previous Recovery HD partition now Bitlocker startup partition instead of originally prepared Bootcamp partition, which is encrypted now. This is in contradiction to other posts here. I'm sure Apple support isn't best choice to ask for support as this problem is MS specific and thus Apple won't care that much ...

Well, I've seen lots of those threads as well and most failed to manage cooperation of Bitlocker and FileVault, have trouble to get a second partition for windows to use with bitlocker or truecrypt etc. But these issues don't apply to me anymore.
Next there are threads instructing how to get a USB stick to work with Bitlocker claiming to have GPT instead of MBR so EFI is gaining any access on them. Those cases seem to work with MacBooks running with Windows, only, thus passing the issues mentioned in paragraph before as well.
And there is my confusion originating from: I can remember some sites claiming to have trouble with EFI on a Mac using Lion, but all those sites are older than Lion's final release date. So I don't know if there is a similar issue today or if I'm actually missing some option ... rEFIt isn't working with Lion according to the refit site itself. Some sites claim EFI is behaving differently on whether there is a super drive or not as Lion isn't supporting USB booting as long as booting from DVD/CD is available ... what's true about those facts? Is my problem related to having a super drive? Are things getting better as soon as I'm replacing my superdrive by a second internal drive? Is it that strange or some sort of plausible behaviour?
According to GPT, Windows 7 is obviously failing to properly detect hybrid MBR/GPT setups on USB sticks while that's what MacOS' disk manager is doing on having GPT-based single partition stick with exFat format. Instead of using the second hybridized partition it's accessing the protected part, only. If I'm converting a disk to GPT in windows everything works fine, but then without hybridized MBR ...
Regarding the fans I'm with you ... as soon as processor load is exceeding 5% the fans get quite noisy ...

I'm trying to use Boot Camp to install Windows 7 Enterprise on a 2011 MacBook Pro, but most of the drivers aren't installing correctly.

Apparently, the only boot camp functions that work are restarting in Mac OSX and double-touch right-clicking, which I got after downloading the BootCamp 3.2 upgrade.
This means no sound, no Direct3d (though I've installed the Intel drivers manually and that's now working), no keyboard functions, and no internet access by ethernet port or wifi, which means I won't be able to activate Windows and this install will soon die a quiet death.

The Bootcamp Assistant version should 5.1.x. Please see Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support and Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support.
The version of Bootcamp Drivers 5.1.5621 supports your Mac
From Boot Camp Support Software 5.1.5621
System Requirements
MacBook Air (11-inch & 13-inch, Mid 2011)
MacBook Air (11-inch & 13-inch, Mid 2012)
MacBook Pro (15-inch & 17-inch, Mid 2010)
MacBook Pro (13-inch, & 15-inch, Early 2011)
MacBook Pro (17-inch, Early 2011)
MacBook Pro (13-inch,15-inch & 17-inch Late 2011)
MacBook Pro (13-inch & 15-inch, Mid 2012)
MacBook Pro (Retina, Mid 2012)
MacBook Pro (Retina, 13-inch, Late 2012)
MacBook Pro (Retina, 13-inch and 15-inch, Early 2013)
Mac Pro (Early 2009)
Mac Pro (Mid 2010)
Mac Pro (Mid 2012)
Mac mini (Mid 2011)
Mac mini (Late 2012)
iMac (27-inch, Mid 2010)
iMac (21.5-inch & 27-inch, Mid 2011)
iMac (21.5-inch & 27-inch, Late 2012)
iMac (21.5-inch) Early 2013
Windows 7, Windows 8, and Windows 8.1, 64 bit

Unable to install Boot Camp Update 3.1 on Windows 7 32-bit on MacBook Pro

I have Windows 7 Professional 32-bit on my MacBook Pro and have Boot Camp 3.0 now. I've tried to install Boot Camp 3.1 both using the Apple Software Update on Windows and the installation from http://support.apple.com/kb/dl996 but it won't work. Are there any ways to solve this problem?
Message was edited by: Ho Ren Sen

Hi and welcome to Discussions,
do you have any kind of Remote Viewing software installed, like LogMeIn or Go To My PC ?
These are known to cause trouble with the the BC Driver packages.
Check if there are additional Graphics Adapter shown (apart from the "real" one).
If so, uninstall the remote software, do the 3.1 update and then reinstall.
Regards
Stefan

My Macbook pro won't install Windows 7, My Macbook pro won't install Windows 7

Similar Messages

Maybe you are looking for