My MacBook Pro won't load windows 8

Hello, I have a problem with my MacBook Pro.... Maybe you guys can help me. When I try to booth my Mac to windows 8, it loads but then the screen goes black. But sometimes it says that windows couldn't load correctly. It was working fine until now. How can I fix this? Thanks!

And you are connected to the internet how?

Similar Messages

My MacBook Pro won't load any websites on Safari (except this site, Facebook and Google), Opera, or Mozilla Firefox. I already did the "Reset Safari", restarted the computer half a dozen times, and I can't find this alleged "caches.db" file to delete.

My MacBook Pro won't load any websites on Safari (except this site, Facebook and Google). Opera and Mozilla Firefox won't load any sites whatsoever. I already did the "Reset Safari" several times, restarted the computer half a dozen times, and I can't find this alleged "caches.db" file to delete. I virus scanned the computer with Sophos, Avast, and iAntiVirus and it looks clean.

Is iAntiVirus the best virus protection to use for a MacBook?
The best anti-virus protection is your own common sense, and what you already bought and paid for with your Mac. Third party products such as "iAntiVirus" convey no additional benefit, and as you already determined are very capable of causing trouble.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Macbook Pro won't read Windows XP disc

My Macbook pro won't read either my 32bit or 64bit windows xp discs for installation on bootcamp. The disc spins, makes a strange noise then ejects. It seems like this is a common problem. I have previously installed windows via bootcamp before and it worked fine. Normal cd's are read fine as well, just the windows discs won't read.
Any suggestions?
Thanks.

Hi,
first: put your XP 64-bit CD as far away from your Mac as you can. Apples BootCamp does not support it
Second: I assume corectly that these are Retail or SystemBuilder XP discs, not some Recovery CDs or manufacturere-branded ones, right ?
Third: insert the 32-bit XP CD while in OSX and check with the Finder if it can be read there (checking for the 'usual' folders on it: i386, Support, etc and files: winip51.sp2 etc.).
Fourth: some people round here have successfully used a 'standard' DVD/CD-cleaner disc with their Macs.
Fifth: try making a 1:1-copy of your XP disc. You can use SimplyBurns in OSX for this.
Regards
Stefan

My MacBook Pro won't load up when I turn it on, just loads a gray screen

My MacBook Pro won't start up, just loads to a grey screen.. Please help anyone?

Try holding the option key on startup.

My MacBook Pro won't load any web page I have restarted and safe booted still nothing

My MacBook Pro will not load any web pages. Safari opens but when I click on top sites or type in a website it will start but not get past half of the address before stopping and going no further. I have restarted and restarted in safe boot and still no change. I'm am connected to the internet wirelessly and my iPad mini is connecting to the internet wirelessly fine, so I think the internet is fine. What can I try next?
Thanks

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Just check the box beside “Remove all website data”.
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

Macbook Pro won't load past a grey screen on startup!

I apologise for what will most likely be an essay ahead.
I have a Macbook Pro (2.16ghz) that is just over three years old. It is running on Leopard with all the up to date patches / updates. Over the past week or so, it has been 'playing up' in the sense that the spinning loading icon would appear at random intervals and stay there for a good 20 to 30 seconds or so, not allowing me to do anything. If I would be listening to music, the music would pause and then come back on.
It would normally appear when something was trying to load. For example, the final straw was when I was using Adobe Bridge and it was taking an extremely long time to load up the photos I had imported and in the end I gave up. Speed has never been an issue before and my MBP has 2GB of RAM.
So I backed up what I needed and proceeded to do an 'Erase and Install(Leopard) format. Once formatted, the MBP booted up and I completed the registration, took my User picture blah blah etc. Once done, the MBP booted into OS X - this is where the problems occurred. The spinning loading icon appeared and after about 30 seconds or so, the Finder window / toolbar at the top disappeared, as did the Macintosh HD icon on the desktop. All I was left with was my wallpaper and Dock with icons in. However, if I clicked on any of the programs, nothing would happen.
Naturally, I tried restarting it and the same thing happened again. I figured that because my MBP was connected to a second Dual monitor, that this might have been the issue so I decided to boot from the OS X Leopard CD and do another 'Erase and Install'. I once again got past the registration screen, but this time, instead of booting into OS X my MBP stuck itself on a grey screen. It would not go any further.
I then decided that the spinning loading icon issue may be a RAM problem. When I first got my MBP, I upgraded the RAM so I knew how to take it out and replace it. So I tried taking out the RAM stick (1GB) I put in orignally and booting it with the original 1GB stick. The same problem occurred. I tried the other way round, putting in my 1GB RAM stick and taking the original out - nothing worked. I tried every possible combination, even swapping the sticks around.
Eventually my brother tells me he has some spare RAM which I also try and once again, this does not solve the issue. So I figure it cannot be a RAM problem.
So next I try booting from the OS X Disc on startup and run Disk Utility. I verify and repair the Mac HD which comes up fine. No errors, no issues, nothing.
I finally scour the internet for info on what could be the cause of the problem and the biggest suggestion seems to be formatting. So I once again try formatting my MBP for a third time - however this time, I get the original problem. It boots up into OS X but then the Finder toolbar and Mac HD icon disappear, leaving me with Dock and Wallpaper.
The final thing I try is resetting the MBPs PRAM on startup. This does not solve the issue.
So here I am. If you could be bothered to read all of that, well done haha I'm not sure if I could have.
If anyone has ANY suggestions or advice, please post!
I do not have Apple Care so if I was to take it to the local Genius bar, would they look at it for free and diagnose it? Or would that cost me? I have never had to take my MBP in before.
Thankyou again

I just skimmed over this because the post is like a small novel! lol Try a Apple Hardware Test. I think it's probably a bad logic board.
http://support.apple.com/kb/HT1509
Don't take it to a Genius Bar until you've done this, saves time and you might have a little more info to give them. Also that way you won't feel pressured into anything. It's out of warranty, so sometimes I've noticed they can be a little pushy especially on a very high dollar replacement such as a new logic board on an out of warranty item. Also the "enhanced diagnostic" is around $100, so you might have to at least fork over a hard earned Benjamin and not get anything fixed. And whatever you do, DO NOT, I repeat, DO NOT tell them you upgraded the RAM yourself. If they are feeling in a good mood and decide to knock off any money or waive any sort of fees, this will kill it instantly. RAM is considered "user serviceable," but they normally try to plead "the part you installed is not Apple Authorized" or the "installation caused the issue and was not an ACHT." Put back in the original stick and leave it alone. Hope this helps you out!

Macbook Pro won't load past white loading screen when turned on after kernel panics

Hello,
I have a Macbook Pro and recently its been having repeated kernel panics. In the past few days its been turning off every few minutes or so. yesterday it had one and now when I try to turn it on it doesn't load. I get the white loading screen with the apple logo and a loading bar underneath. But after the bar fills about 5% of the way (if that) the bar just disappears and the spinning loading icon just keeps going without anything happening (however long I leave it).
Please can someone give me some suggestions to fix this. Just a few things to note:
a) I'm not great with computers so any fixes please explain in the most simple terms
b) I have VERY important work files on there that are NOT backed up (big mistake I know), so please only suggest fixes that will not remove these Microsoft Word files. Guaranteeing the safety of my work is paramount with any suggestions.
c) I may not have any of the disks which came with the Macbook Pro originally (though I may somewhere)
d) I've read some other forum posts and it seems that I need to know the details of my operating system. I don't know these and have no way of accessing them on the computer (for obvious reasons). Its a late 2011 Macbook Pro if that is of any help.
A massive thank you to anyone who can suggest a fix to these, I shall be eternally grateful.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I settup Bootcamp drive on my Macbook pro retina. Loaded Windows 7. The necessary drivers to communicate with Win7 did not load. How do I get drivers for flash drive, etc. when the keyboard et. all do not work on Windows side?

Can't get Windows 7 to recognize my keyboard, usb drives, nor the mouse pad on my MacBook Pro. Have settup Bootcamp division and loaded Win 7. Apparantly the needed drivers did not load. How do I deal with this issue?
Thanks.

Got it working!
First off, I found out if you use a 32GB Flash Drive or larger, you need to format it with EXFAT format, not MS-DOS FAT. I was also trying to use USB 3.0 Flash Drives which may have something to do with my problems. I was successful in my installation attempt when I used an 8GB USB 2.0 Flash Drive formated in DOS/FAT.
Also ensure when you install Windows, that Windows 7 Premium (NOT Basic) is selected for installation (also had the option to install Windows 7 Professional and Ultimate but do not have the license for them). I did not see that window with all the options on any of my three previous installation attempts. I noticed that Windows 7 Basic is the default which may have been part of the problem.
Happy and safe New Years to all,
DJ

Macbook Pro won't recognize windows vista dvd

Hi everyone,
I just bought Leopard and a new copy of Windows Vista Home Premium to install on my Macbook Pro. Leopard installed fine. Had some issues partitioning (had to get the right size b/c of unmovable files). Anyway, i made a 27gb partition to install my Vista. However, when I put my install dvd into the drive, it spins, makes a funny noise, then asks for the install dvd. After it spins the dvd some more, it spits it out. It doesn't seem to recognize the install dvd. I've put the Vista dvd into my PC and it runs fine. I would greatly appreciate any and all suggestions.
Thank you.

I have exactly the same issue as you with mac not recognising the Vista Home Premium DVD either in Bootcamp or in the Finder. The applecare people were completely clueless and the guys at the "Genius" bar in the apple store were less than impressive and were insisting that it was a faulty DVD. Since i had tested it on various PCs and it worked fine, i knew it wasn't that. After 30 minutes of arguing they finally agreed to replace my DVD drive which unfortunately didn't help either. I have now ordered alternative media from Microsoft in the form of CDs for the cost of postage and will try that when they arrive and let you know. This is a problem that i'm seeing in various forums all over the place and is clearly some bizzare issue with Mac software or hardware which Apple refuses to acknowledge exists. P.S, don't bother re-creating the DVD as i tried copying the image to a USB drive on a PC and then burning it onto a blank DVD via the Mac. Although this allows the finder to mount the new DVD, Bootcamp still won't recognise the disc as a valid installer disc. More soon...

My Macbook pro won't install Windows 7, My Macbook pro won't install Windows 7

Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.

I would highly suggest restoring your Mac to factory settings. Back up all files on externL hard drive first. Then let the be the first thing u do. Should resolve issues. If computer is older and has been running under a certain operating system for a period of time it may not like the partition or may have corrupted files that restoring will wipe clean

My macbook pro won't load all the way when I start it up.

Lately, my mac book pro has been slow to use, and the colour wheel pops up often. I shut it down earlier today, and now when I try to start it up, it won't load all the way. When I do manage to get to the homescreen, the applications and toolbars won't load. Any ideas what the issue might be and how I can fix it?

It could be a number of issues, Fred.
Have you optimized your photos to no larger than 1000x750 pixels, per the FAQs to the right of this forum? Oversized photos are the chief reason for these types of failures.
http://forums.adobe.com/thread/431851?tstart=0
You also say your videos are MP4s. Are these AVCHD video or are they from a "webbie" camcorder, such as the Flip cam? Flip video uses a proprietary codec that often jams up video editors. This is also covered in our FAQs.
http://forums.adobe.com/thread/437535?tstart=0
Finally, have you ensured that the drive you are saving your video to has adequate free space and is freshly defragmented? You should always have at least 30 gigs of free space on your drive plus 30-50 more for each hour of video you're outputting.
And, if you are exporting to a drive other than your C drive, you should ensure that the drive is formatted NTFS rather than FAT32. FAT32 drives have a file size limit that often chokes video output.

My MacBook Pro won't load my CD with pictures. Help me :(

I bought my laptop a couple months ago so I know it's not because my computer is old, but my picture CD won't load or open or anything. It makes a noise like it's going to start up, but still I get nothing. It works on my parents' desktop computer, but not mine please help me!

Hi JustinAlexa,
You don't say if other CDs or DVDs work. Please check out this article which goes through troubleshooting optical disc reading.
Archived - Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop
http://support.apple.com/kb/ts2288
If it's just the one CD, it's likely an issue with that CD. See if another copy can be made and try that.
Best Regards,
Nubz

My macbook pro won't load past the opening screen

i was using my macbook pro last night and it just froze, i turned it off and then tried to restart it. while restarting, i noticed that the screen had not changed for a couple of minutes. it was the screen when you first turn your computer on, before you log onto a user. i waited for about an hour and the screen wouldnt change. i've tried restarting it. nothing is working. any ideas?

Well, it would depend if your HDD has died. If you don't have a backup that would be unfortunate.
First, go grab your original install disk, stick it in, and restart & hold the C key.
That will bring up the install screen.
Select your Language.
Then go up the top to Utilities > Disk Utility > Repair Disk + Repair Permissions
Please take note of any errors it repairs / does not repair.

Macbook Pro won't load web pages

I just bought a new Macbook a few months ago. I have never had this problem with my last computer but today I cannot load certain pages. When I first tried to use my computer absolutely none of the webpages would work. Some are working now, but a lot of them take a little while to load and I actually have pretty fast interenet. I can't figure out to get all the sites to load again. One of the sites not working is my school website that I need to do homework so any suggestions are welcomed! I have also tried using Google Chrome and the sites work on there but I prefer to use Safari so I'd like to figure out what is causing the problem.

Both are very good browsers.
If you're having problem accessing specific web pages, it could be that...
- certain websites are offline or need to be updated
- school or corporate websites may use filters to protect the school or corporation
- applications like DNSCrypt may selectively steer you away from dangerous sites
- some parents protect children from sensitive sites; Apple's Parental Controls can do this
I'd contact your school's website with the problem. It's in their best interest to make sure online material is available to students.

Macbook Pro won't read windows OS disk?

Upgraded my MBP to a 500gig HD, Imaged the old to the new with carbon copy clone, everything work fine on Mac side, but when I try to reinstall windows VIA bootcamp it won't recognize the windows disk. Like it won't recognize the windows OS disk at all (no matter when I put it in). It's an OEM disk 32 bit vista or 7 (i have 2). The disks work in other machines and my MBP can see them from an external disk drive, but then bootcamp won't install them... I get a screen that goes from the apple, to a folder, to a circle with a line through it... The laptop read the Mac OS disk fine, other dvds, and cds fine. Any takers???

Hi,
first: put your XP 64-bit CD as far away from your Mac as you can. Apples BootCamp does not support it
Second: I assume corectly that these are Retail or SystemBuilder XP discs, not some Recovery CDs or manufacturere-branded ones, right ?
Third: insert the 32-bit XP CD while in OSX and check with the Finder if it can be read there (checking for the 'usual' folders on it: i386, Support, etc and files: winip51.sp2 etc.).
Fourth: some people round here have successfully used a 'standard' DVD/CD-cleaner disc with their Macs.
Fifth: try making a 1:1-copy of your XP disc. You can use SimplyBurns in OSX for this.
Regards
Stefan

My MacBook Pro won't load windows 8

Similar Messages

Maybe you are looking for