My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

Similar Messages

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

Here's a test you can run:
1 - copy a set of photos from the disk to a folder on the desktop.
2 - download and unzip the Automator workflow Convert to JPG and Embed sRGB profile. You can download it from Toad's Cellar.
3 - select the files in the folder and drag and drop onto the workflow app.
4 - try to import the resulting files.
OT

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
-----

Macbook Pro won't print the first page of any file in any application.

Problem: My Mid-2009 Macbook Pro won’t print the first page in Microsoft Word, Sibelius 6, or in Adobe Reader. My printer is an old Canon MP480 that’s worked for almost 2 years perfectly. As well, the “print to pdf” function results in the same error. However, if I open a new user account it all works fine. To change user accounts would be an extreme hassle though so, if possible, I would like to first remedy this one.
Recent changes: the motherboard of my computer was replaced about a week and a half ago. I printed a lot of stuff from Word two days ago and that worked fine but, already then the print to pdf function was cropping off the first page. At the time, though, I accredited the issue to the word documents being filled with pictures of sheet music that I was printing instead of text.
Things I have tried:
Updated Mac software
Repaired Disc Permissions in Disk Utility
Checked for new printer drivers/firmware
Reset the PRAM (http://support.apple.com/kb/ht1379.)

No but it's not a printer-related issue because the "Print to PDF" function also leaves out the first page.

TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Hi Jetjuice!
I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

MacBook Pro won't sync with other devices

My MacBook pro won't sync with other devices in the house. My iPad and iPhone sync OK but MacBook won't for some reason. Can you help?

Sign into your account in iTunes - from that page you should be able to deauthorise ALL 5 authorised computers - supposedly you can do this once a year.
Thereafter any devices you no longer have will be deauthorised, and you can reauthorise those you still have or are new.
AC

Macbook Pro won't boot with external HDD plugged

I have a weird problem. My late 2008 Macbook Pro won't start with external HDD plugged either FW or USB... The screen stays white until I unplug it and then the Apple logo is there.
Anyone know any solution for this? Or anyone have the same problem

yeah I had the exact same issue with one of my 750GB externals too. I just left it for a while (about an hour or so) and it was fine..
I believe its so slow because the system is indexing the drive, which can be a very slow process if the drive is big, has a complex folder-hierarchy, and/or is fragmented.
Does the hard-drive appear quite quickly in Finder once OS X has started up? if its slow it may confirm what I've just said.

Calendar on Macbook Pro won't synch with iCloud

Calendar on my Macbook Pro won't synch with the Calendar on iCloud. I tried a number of times to delete Calendar from iCloud in System Preferences then restart the laptop. I also switched the 'enable' function on and off in Calendar Preferences. I restarted after every attempt and also refreshed. It looks as if it's updating but then nothing happens and the triangular, exclamation mark appears, grayed out, next to the iCloud icon in Calendar. I saw an answer in the Apple Support troubleshooting section regarding this about the server having to access port 80 or 443. Could this be the problem and if so then how would I make any port accessible to the relevant server? I'm not having this problem with my other devices or computer.

Hello Wateru,
Thank you for providing the details of the calendar issue you are experiencing with your MacBook Pro. You have taken some really good troubleshooting steps already. I recommend continuing with the steps in the sections titled "General troubleshooting" and "Troubleshooting on OS X" in the following article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

My Macbook pro won't sync with my iPad. It says it isn't authorised. I have gone as far as deauthorizing all computers then authorizing the Macbook & still no luck. Any ideas?

My Macbook pro won't sync with my iPad. It says it isn't authorised. I have gone as far as deauthorizing all computers then authorizing the Macbook & still no luck. Any ideas?

Sorry, not sure how to screenshot on my computer, but this is what is says word for word:-
The Ipad could not b synced because the computer is not longer authorised for purchased items that are on this ipad.
To authorise this computer for items purchased from the iTunes Store, choose Store>Authorise this computer.
I have done all of that but not luck. That's when I tried deauthorising all computer which it did ok. I then authorised my Macbook pro again, it said I had one computer now authorised. I tried to delete apps via Itunes then sync to my iPad, but the above message keeps popping up & it wont do what I want.

My macbook pro won't print about 10% of the time

My macbook pro won't print to my wireless printer about 10% of the time. I don't believe it can "find" the printer. Any thoughts?

Boubert,
the question mark in the folder typically represents the inability to recognize a valid filesystem on the volume being booted from. You can try this, although it might not make a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to boot normally now?

I am attempting to connect my Canon Pixma MG5220 printer/copier/scanner to my MacBook Pro OS 10.6.8. After loading software from Canon and attempting to print, I get the following message: NT_STATUS_ACCESS_DENIED. What can I do to fix this?

I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.

Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

iOS: Device not recognized in iTunes for Mac OS X

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

Similar Messages

Maybe you are looking for