My MacBook Pro won't start. It's old, c 2008, any ideas?

My MacBook Pro won't start. It's old, c 2008. Have tried many suggestions on line: opt, cmnd, r,p, etc. Any suggestions?

Hey treasure hunter,
I found some help for when your computer won't turn on. Try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.MacBook Pro: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh

Similar Messages

  • My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

    My 2007 MacBook pro won't boot up beyond a White screen any ideas what to do?

    Odd how this hasn't been archived yet.
    I'm getting the same thing with my Macbook, but can't boot past the white screen. An Apple store in KS suggested I needed a new hard drive, but I've already put two in there and it's still doing the same thing. I really don't want to buy another motherboard like I had to a couple of years ago.
    My choices are either buy a cheap drive to boot from and remove the current one to put into an external case, or save the money by not buying a new motherboard and putting it as a down payment toward a Mac mini.

  • MacBook Pro won't boot, sleep light is off. Any ideas how to fix it?

    MacBook Pro 2007 won't boot, sleep light is off. Any ideas how to fix it?

    Maybe some help here:
    http://support.apple.com/kb/TS1367
    http://support.apple.com/kb/TS1365

  • My MacBook pro freezes during start up after 30 secs. Any ideas?

    My MacBook pro freezes during startup while the logo is still showing and the moving circle stops after about 30 seconds. Any ideas please?

    On my Mac that DSMOS message appears about 20 seconds into the boot process.  Booting finishes about 30 seconds after that.
    Do those letters "v" really appear on the screen?
    Unfortunately, if those are the last messages on the screen, I see nothing there that explains the hang.  The next message I see after the DSMOS message is one about an AirPort daemon, although I'm not sure I understand any connection there might be between that and your hang.
    Since you don't have a system restore disc you won't be able to do the next thing I was going to suggest, which is to run the diagnostics that came with that Mac.  If you have an OS X 10.6 installation disc, you could try reinstalling OS X over the top of what's on it now.  Right after that finishes use Software Update to apply any missing OS X updates, or download and install the "combo" updater for the version of OS X 10.6 that you want.  If that Mac has a software problem doing that might help.

  • I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

    I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

    Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

  • Hi! My MacBook Pro won't start! HELP !!!

    Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
    I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
    Has anyone had this same problem? 
    All I get is white screen + grey Apple and spinning grey disk...  it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
    This MBP is from 2011, runs on OS X 10.6.8
    I tried booting with OS X Snow Leopard CD, it didn't work!  (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
    I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
    When i run coomand on root# fsck -fy  --> RESULT = my HD was checked and seems to be FINE!
    Thanks

    Please make a Genius Appointment and take it in for service.

  • Spilled liquid on MacBook Pro - won't start - any suggestions?

    spilled liquid on MacBook Pro - won't start - any suggestions?

    Thank you both for your responses! I watched a video on how to remove the hard drive - special tork(?) screwdriver and too many steps for me to feel confident about doing it myself, so I took the computer to an Apple Store - and thank God, the hard drive appeared undamaged - they are transferring the data to a new Macbook Pro. The loss of data was the scariest part, so I am breathing again!
    The laptop was three years old, I was hoping for another year or so before upgrading, but such is life. I appreciate your upfront advice.

  • MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

    MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

    Try resetting the SMC.
    Barry

  • MacBook Pro won't start after changing access rights

    I did something very wrong. Unfortunately I changed the access rights of Macintosh HD for "everyone" to none.
    Result, my MacBook Pro won't start anymore.
    Already tried the installation disk, reset password for root and users. No result.
    Help program "check acces rigths". Didn't work either.
    How do I reset the access rights of Macintosh HD?

    https://discussions.apple.com/docs/DOC-2240
    The first solution is what you're looking for.

  • Macbook Pro won't start properly... keeps restarting without chime!

    Macbook Pro won't start properly... keeps restarting without chime!
    Late 2007 Macbook pro.  OS upgrade worked great for me.
    I have had this problem on and off for a month or so.  I simply cannot figure out what the issue is.  I have tried poerup with and without AC power and with/without battery installed.
    Starting in Safe mode does not help.
    Trying to start with a disk does not help.
    It sort of seems like it might be an internal power issue or GPU issue.
    It also feels sort of like a software compatibility issue since my Macbook Pro gets reallly slugish for no apparent reason sometimes and IU have to restart.
    I have three different anti-virus programs so I doubt it is a virus issue.
    I noticed all this start after I did a Mountain Lion upgrade and then tried to start up VMware Fusion.  Fusion seemed to just bog down the computer horribly but did not cause a system crash.
    I need to edit an important sequence on Final Cut Pro and don't want it to freeze me out!
    Anyone who has had this problem and resolved it please let me know 
    God bless 

    Systematically run through this list of fixes.
    ..Step by Step to fix your Mac
    If it doesnt chine it doesn't mean much, the mute could be on or you installed a anti-chime software.

  • I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

    I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

    Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • HT1379 Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Hold shift key down while booting should get you in
    go through this list and get back with me
    Step by Step to fix your Mac

  • MacBook Pro won't start at all - clicking noise with black screen

    Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.

    You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
    It's  ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
    Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • My 2009 2.26Ghz MacBook Pro won't start up

    My 2009 2.26Ghz MacBook Pro won't start up. I know it's not the HDD because I replaced it with the old one I had in it and it did the same thing. I also know it isn't the HDD because I can boot of of it when I attatch it via an external HDD enclosure. It sometimes turns on if I let it sit for 30 minutes and if it does turn on it works perfectly and has no symptoms until I close it then it freezes up when I wake it up and I have to hard restart it but it doesn't restart then. It seems to do this more so if I close it then move it (put it in my bag and go to school). It's getting me really upset cause if it's my motherboard it's $600 to replace (almost not worth replacing except I don't have $1400 for a new MBP) please give any advice. I thought about buying the data doubler by OWC but that would be a last resort. I upgraded the ram to 8gb, 1333mhz (I know it uses 1066Mhz but I couldn't find any where I live so I put in 1333mhz ram expecting it to underclock to 1066 which it seems to have done that with no issue to my knowledge just thought I'd add that in case though.

    Sluggish could be due to not enough ram for what you want to do.
    Keep working with it, you may need to put more ram in, but go for the stuff that meets the specs.
    A much liked source on here is OWC, http:www.macsales.com you only have to look up your machine to get exactly the right stuff.
    Get back with how it is working, would like to hear more.

  • Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!

    Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!

    Here's a link to a Support page on the topic, which may be of help in finding resolution:
    •A flashing question mark or globe appears when you start your Mac
    There are a few known causes of this symptom, so you'd have to try some things to
    see if you can narrow down the cause; this often accomplished by finding success.
    Hopefully the info there helps.
    Good luck & happy computing!

  • 17" Macbook Pro won't start at all.  I shut it down last night at 80% and now there is only black screen, no light, no sound.  What to do?

    My 17" Macbook Pro won't start at all.  I shut it down last night at 80% and today I get only a black screen with no sound, no light, nothing.  The power cord light does show orange when plugged in.  I don't know exactly which OS it is. It's model # A1286. I've tried all the tips about holding down different keys to no avail.  Anyother ideas?  (The serial # is w8******agu if that helps.)  Many thanks.
    <Edited By Host>

    I had the exact same issue...  Macbook Pro late 2008 with Core2Duo.  Went to all the steps suggested in the knowledge base, tried to reset the SMC, but to no avail.   Took it to the Macstore in Mexico, the wanted to replace logic board for $800....  Finally, I sent it to a logic board repair service, where they "fixed"  the logic board for $200.  It worked perfectly for 4 months, then happened again   
    Any ideas??  I would appreciate any help!!!!!

Maybe you are looking for

  • Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"

    I've built a new VM from which I'm running PowerShell scripts to backup my databases.  It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to

  • PDFs don't copy.

    I have an Inoi NAS drive, and whenever I try to copy a PDF to it, it is not openable on any computer. Preview and Acrobat both say that the file is corrupted. Interestingly, a few PDFs downloaded from websites work when copied, but any created on thi

  • Since installing Yosemite postgres no longer works

    I've tried restarting server, creating a new server, none of it works. I've tried "Reload configuration" "Restart Server" "New Server Registration"  None of them work.  Also tried "mkdir /usr/local/var/postgres/pg_tblspc" How can I get postgres worki

  • Disappearing desktop icons in Lion 10.7.2

    As shown in the screen capture below, some deskop icons will intermittently disappear from my desktop. If I reboot, they may either all be there or some other ones will be missing. Is there a fix for this bug?

  • XMLConnector

    Hi, datagrid<--dataset<--xmlconnector<-xml file dynamic generateb by a script.php xmlconnector parameters : direction receive actionscript : xml.Conn.URL = " http://www... script.php"; xmlConn.trigger(); test movie : i can see display of my table pub