My Macbook Pro wont load OSX
I took it to the Apple store and was told i would probably need to replace the hard drive. Why is it not loading? Everything was fine twelve hrs ago. ANy solutions, advices?
Your mac hard drive is dead ,broken ,faulty and it doesn't load anything it just can't load OSX. No broken ,dead things can't do it .
****Everythings was fine twelve hr ago*****
Drives can fail and very fast just a minute and BOOM it's dead . Just get a new hdd and your mac is happy and working again.
Good Luck!!!
Similar Messages
-
Macbook pro wont load ebay pages
Hi,
I finally took the plunge and got rid of Windows and bought myself a macbook pro. Not had it long but its already driving me crazy. It will not load ebay pages!?!? Every other internet site loads great but when I come to load ebay, I can search but when I click to view items it wont load the page!?!? I've tried everything I can think of, unintstalling safari, using chrome, reseting safari, emptying the cache, turning router off/on and turning airport off/on. Its got so bad I'm back to using my windows laptop!!
Can anyone help before I throw it through the window lolHello Daggers75
Welcome to Apple Support Communities
Try this... go up on the menu bar to: *Safari > Preferences > Security* and see if *Accept cookies:* is set to Never, if so change it to *Only from sites I visit*.
Dennis -
My macbook pro won't load pdfs downloaded from the internet. I click on something via the internet and it just goes to a blank page. Any ideas what is going on? Thanks!
There isn't that option?
-
Macbook pro wont load, just gets to a white screen with apple logo
Hello,
I put my Mac to sleep last night. I am trying to turn it on now but it won't load.
The bar comes up at the bottom, fills about 20%, dissapears and then the spinny globe stays there forever, it will not load.
I have tried booting up by holding shift or x and no change.
Worthy of note, I installed leopard also last night.
Ive tried putting the leopard disc in, its being read but nothing changes on screen.
Ive tried holding command + p + r.
Ive tried unplugging, replugging.
Holding alt and choosing boot from disc or efi boot goes to the same white screen.
Holding c makes the disc drive make alot of noise, same white screen with nothing happening.
Nothings happening
Message was edited by: azz0razz0r, which OS originally came installed on your MacBook Pro?
-
How come my macbook pro wont play dvds?
how come my macbook pro wont play dvds?
Don't know!
Please describe in detail all you have attempted to do in order to resolve the issue.
Apple Portables: Troubleshooting the slot load optical disc drive -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Macbook pro wont connect to internet using cable, but connects using wifi fine
My macbook pro wont connect to the internet using a cable, but connects using wifi fine. I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?
Can you open a terminal and invoke the following commands:
ping -c 10 localhost
and
ping -c 10 google.com
You should normally get something like:
PING google.com (74.125.224.103): 56 data bytes
64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms -
New macbook pro wont accept password
I moved everything over from my i5 MBP to a new i7 via utilities migration assistant. However the new macbook pro wont accept my password, nor will it recognise the other user account passwords. Works fine on the i5.
In Disc Utilities, change password asks me to select an image, but does not light up "change" when I select user.
Any ideas?Is you new MBP the 2010 model or is it a newer model running Mountain Lion?
If it's a newer model running ML, you can simply boot into your Recovery partition (hold down the Command and R keys whilst booting) and when you get to the Recovery window, select Terminal from the Utilities menu. In Terminal, type
resetpassword
and hit Return. A small app will open that will allow you to change the password for the user that you select. Then just reboot and use the new password.
If, indeed, you're running 10.6.4, you'll need the installation disc to use the Reset password utility.
Good luck,
Clinton -
I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie. -
I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.
Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Bluetooth [BT] failed during use.Menu bar icon remains as does two BT icons in Utilities folder. System Prefs. BT icon totally gone. Remaining icons say "No BT Hardware Found" - " BT Not Available" etc. Have 3 yr. old MacBook Pro Notebook with OSX 10.6.8 & built-in Bluetooth. [ Close by iPad's BT remains functional. ]
Yeah the Bluetooth hardware has failed and needs to be replaced. there is nothing you can do except replace the BT chip. Take it to Apple.
-
I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions
Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton -
i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?
I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not. -
macbook pro wont shutdown
Holding the power button for 10+ seconds should shut it down. But that stops all processes, including active read/write activity, mid-step. Yuor system may not restart because the OS (not the disk drive itself) could be corrupted.
Try option-command-esc to bring up a list of application to force-quit, that way only certain applications are forcibly stopped instead og the entire OS.
Maybe you are looking for
-
How to add one task in manager task list in CRM
Hello, I have one scenario like when the user status is changed in service request then manager should get one email notification and that one task should be added in the manager task list. To send the email I have configure the Action profile and it
-
How to Sort music on play list by FILE NAME?
How to Sort music on play list by FILE NAME?
-
FAGLF101 - SORTING/RECLASSIFICATION (NEW)
Hi I have done the configuration of Parallel Ledger and Configured the Sort method, Valuation area, assigning GL accounts for the Sort method and Assignment of Valuation area to Accounting Principle. Then when I am running the FAGLF101 transaction fo
-
Timing discrepancy between burned DVD and Adobe Premiere Elements 12
Why does the DVD I burned have a different total time (1:54:35) as compared to the ending time in Adobe Premiere Elements 12 (1:54:42)? A similar thing happened a week ago too, when the raw video when played in Windows Media didn't match up with the
-
Hi All, Can anyone throw light on how to change the legend in the network graphic for PS? For exmaple, is there a way to display partially confirmed activities in Yellow vs finally confirmed activities in Red?