My Macbook Pro wont restart after a system update
I bought a macbook pro in November 2012. I did a the most recent mountion lion system update. It will only shutdown by holding the button. When booted, after entering my password for the user, the mac will run but the screen is black. The commands or trackpad do not respond.
What do I do?
First you should try to back up anything in your hard drive that is really essential, like files you can't afford to lose. Then I'd try to boot into recovery mode, which you do by restarting and holding down command R (I think. I've gone to bed so I'm doing this from my phone. But you can google recovery mode. ) once you have booted up in recovery mode, use disc utility (it will be very apparent where that is) and repair your hard drive and permissions, and then try to start up normally. The fact that the computer did start up in safe mode is pretty good evidence that there is a problem with some third-party software that you have previously installed, so this may require a trial and error process to find out what that software is that is causing the problem.
Similar Messages
-
Macbook Pro keeps crashing after airport Atheros update (none before)
I installed the update for Airport Atheros last week and I consistently had Kernel Panics. I thought it was the bad ram that I just installed. I then took the ram out and reinstalled Mac OSX completely. I ran all the software updates including the airport atheros one. Everything was running well then when I clicked on the wifi icon on the menu bar, i was hit by a kernel panic. I am so frustrated because I spent all night to restore Mac OSX and my personal data.
So as you know, I never had a kernel panic related to airport card on my 90 days old macbook pro santa rosa prior to the update.
Do you know anyway to revert the airport atheros update? I do not want to go through the hassles of reinstalling everything again.
Thanks for your helps.
Here is the log:
panic(cpu 1 caller 0x0035D113): freeing free mbuf
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x36b8b9f8 : 0x128d08 (0x3cc0a4 0x36b8ba1c 0x131de5 0x0)
0x36b8ba38 : 0x35d113 (0x3ecf98 0x0 0x0 0x36b8badc)
0x36b8ba58 : 0x35d4b3 (0x48c46600 0x8 0x36b8baa8 0x1)
0x36b8ba78 : 0xdcd695 (0x48c46600 0x0 0x20 0x5364300)
0x36b8bbe8 : 0xdcd9d4 (0x34fb82c8 0x34fba148 0x36b8bc38 0x40)
0x36b8bd38 : 0xdd9d85 (0x35145004 0x0 0x36b8bd68 0x54443d)
0x36b8beb8 : 0xdaad9a (0x34fb84c0 0xe2fda4 0x36b8bf18 0x1352bb)
0x36b8bf48 : 0xda94a9 (0x5860004 0x0 0x36b8bf68 0x19a001)
0x36b8bf78 : 0x13d7d9 (0x5860494 0x5860004 0x36b8bfc8 0x39a350)
0x36b8bfc8 : 0x19ad2c (0x0 0x0 0x10 0x52d01c0) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AirPort.Atheros(235.9.3)@0xda8000
dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0xa0c000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5b6000
dependency: com.apple.iokit.IO80211Family(162.1)@0xa22000
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
Model: MacBookPro3,1, BootROM MBP31.0070.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 3 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.1.9.3
Bluetooth: Version 1.9.0f8, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 1.5 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mAOk just had another KP sighhhhhhh. It is definitely the airport. Someone please help....
panic(cpu 1 caller 0x0035D113): freeing free mbuf
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x36b5b9f8 : 0x128d08 (0x3cc0a4 0x36b5ba1c 0x131de5 0x0)
0x36b5ba38 : 0x35d113 (0x3ecf98 0x0 0x0 0x36b5badc)
0x36b5ba58 : 0x35d4b3 (0x48a63300 0x8 0x36b5baa8 0x1)
0x36b5ba78 : 0xdcd695 (0x48a63300 0x0 0x20 0x5352b00)
0x36b5bbe8 : 0xdcd9d4 (0x34fb82c8 0x34fba148 0x36b5bc38 0x40)
0x36b5bd38 : 0xdd9d85 (0x35145004 0x0 0x36b5bd68 0x54443d)
0x36b5beb8 : 0xdaad9a (0x34fb84c0 0xe2fda4 0x36b5bed8 0x19e23a)
0x36b5bf48 : 0xda94a9 (0x5837004 0x0 0x36b5bfc8 0x19a001)
0x36b5bf78 : 0x13d7d9 (0x5837494 0x5837004 0x0 0x0)
0x36b5bfc8 : 0x19ad2c (0x0 0x0 0x19e0b5 0x5b7ecec) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AirPort.Atheros(235.9.3)@0xda8000
dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0xa0c000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5b6000
dependency: com.apple.iokit.IO80211Family(162.1)@0xa22000
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
Model: MacBookPro3,1, BootROM MBP31.0070.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 3 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.1.9.3
Bluetooth: Version 1.9.0f8, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 1.5 Mb/sec, 500 mA -
Macbook pro wont sleep after ram upgrade
Hi,
I have a 17" Macbook pro late 2011. I upgraded the ram from 8gb to 16gb last week and now I having trouble with sleep. When the laptop goes to sleep it always to seems to go into hibernation mode. When I open the lid I can only wake the computer by holding the power button for around 7 secs and then it does a restore from the HD. I've tried a PRAM + SMC reset. Also tested the ram and everything seems good. Below is the output from pm set, the console after hibernation restore (filtered for the word 'sleep') and the memtest. Any help would be appreciated.
-- PMSET
MacBook-Pro:nlc phil$ pmset -g
Active Profiles:
Battery Power -1
AC Power -1*
Currently in use:
standbydelay 4200
standby 0
womp 1
halfdim 1
hibernatefile /var/vm/sleepimage
gpuswitch 2
sms 1
networkoversleep 0
disksleep 10
sleep 37
hibernatemode 3
ttyskeepawake 1
displaysleep 3
acwake 0
lidwake 1
--- console
1/05/2015 9:49:34.852 am GoogleSoftwareUpdateAgent[11054]: 2015-05-01 09:49:34.163 GoogleSoftwareUpdateAgent[11054/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x5098d0 bundleID=com.google.Keystone.Agent lastCheck=2015-04-30 04:24:22 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-04-30 04:24:22 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
1/05/2015 10:39:44.654 am Timings[736]: AppTracking stopped due to sleep or shut down
1/05/2015 10:42:46.000 am kernel[0]: ACPI: sleep states S3 S4 S5
1/05/2015 10:42:49.323 am discoveryd[73]: Basic SleepProxy BSP Server Disabled. Metric = 3373
1/05/2015 10:42:49.344 am discoveryd[73]: Basic SleepProxy Could not get the primary interface
1/05/2015 10:42:49.353 am discoveryd[73]: Basic SleepProxy Sleep Proxy Server is not enabled
1/05/2015 10:42:54.725 am discoveryd[73]: Basic SleepProxy Could not get the primary interface
1/05/2015 3:38:01.187 pm GoogleSoftwareUpdateAgent[5941]: 2015-05-01 15:36:40.022 GoogleSoftwareUpdateAgent[5941/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x319240 bundleID=com.google.Keystone.Agent lastCheck=2015-04-30 23:49:37 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-04-30 23:49:37 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
1/05/2015 4:59:19.731 pm Timings[3645]: AppTracking stopped due to sleep or shut down
1/05/2015 5:03:39.164 pm coreaudiod[242]: 2015-05-01 05:03:39.163645 PM [AirPlay] Power: SystemWillSleep
1/05/2015 5:03:55.473 pm discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
1/05/2015 5:03:58.000 pm kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
1/05/2015 5:04:00.000 pm kernel[0]: hibernate image path: /var/vm/sleepimage
1/05/2015 5:04:01.000 pm kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 6:37:59.000 am kernel[0]: Previous sleep cause: -60
2/05/2015 6:38:00.118 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7fc7a2c78d80(2000) (lock state: 3)
2/05/2015 6:38:00.168 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: err 0x0
2/05/2015 6:40:58.537 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:01:11.312 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:09:06.117 am GoogleSoftwareUpdateAgent[8440]: 2015-05-02 07:09:04.977 GoogleSoftwareUpdateAgent[8440/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x545fe0 bundleID=com.google.Keystone.Agent lastCheck=2015-05-01 05:38:03 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-05-01 05:38:03 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
2/05/2015 7:19:11.035 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:35:18.701 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:37:35.421 am coreaudiod[242]: 2015-05-02 07:37:35.420950 AM [AirPlay] Power: SystemWillSleep
2/05/2015 7:37:57.995 am discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
2/05/2015 7:38:01.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/05/2015 7:38:03.000 am kernel[0]: hibernate image path: /var/vm/sleepimage
2/05/2015 7:38:03.000 am kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 7:38:28.000 am kernel[0]: sleep
2/05/2015 7:38:33.000 am kernel[0]: Previous sleep cause: 5
2/05/2015 7:38:33.393 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 1)
2/05/2015 7:38:56.292 am coreaudiod[242]: 2015-05-02 07:38:56.291574 AM [AirPlay] Power: SystemWillSleep
2/05/2015 7:38:57.288 am discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
2/05/2015 7:39:00.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/05/2015 7:39:02.000 am kernel[0]: hibernate image path: /var/vm/sleepimage
2/05/2015 7:39:02.000 am kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 8:16:54.000 am kernel[0]: Previous sleep cause: 5
2/05/2015 8:16:54.588 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7fc7a2cc74b0(2000) (lock state: 3)
2/05/2015 8:16:54.589 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: err 0x0
MEMTEST
Mac OS X 10.10.3 (14D136) running in multiuser mode
Memory Page Size: 4096
System has 8 Intel core(s) with SSE
Requested memory: 10327MB (10829672448 bytes)
Available memory: 10327MB (10829672448 bytes)
Allocated memory: 10327MB (10829672448 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 5163MB (5414836224 bytes) starts at local address 0x0000000101000000
Buffer B: 5163MB (5414836224 bytes) starts at local address 0x0000000243bfd800
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 10327MB region...
Stuck Address : ok
Linear PRN : ok
Running comparison tests using 5163MB buffers...
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : ok
Walking Zeroes : ok
All tests passed! Execution time: 3076 seconds.Hi fatlinesofcode,
First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following
A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
Energy Saver > Schedule > Startup or Wake - Uncheck.
Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
Good luck! -
My Macbook Pro keeps restarting after upgrading it to Yosemite!
Hi, I have Macbook Pro 13-inch early 11, and the only thing that I have upgraded is the ram to 16Gb.
When I start upgrading the ox to Yosemite I headed to few problems (like it was stoked on 1 more minute for over 30 min so i had to restart my mac and start the installation again and again the same problem but this time i wated for 45 mins and finally it was installed. When for the first time it came to that screen so i can choose my user name and type my password nothing worked so i had to restart the mac AGAIN! Finally it worked but way slower than the last ox.)
After a day and two my mac started to restart it self for over 10 times in like 4 hours! It didnt mater if i was working on something using different apps or just listing to music, or just by closing the mac all of sudden i would hear the restart sound for no reason! So now it got better and it not like over 10 times in few hours but it still does several times a day specially when i close my mac. After the restart the only thing that tells me that your mac was restarted due to a problem and do you wanna report it and etc.
I would really appreciate if someone helps me with this stupid problem cause it really is annoying me and im keep loosing my work in middle of working on them.
Thanks!
Btw, im running bootcamp also but i dont use it that much but i beleive i had that problem when im ruuning the boot camp also!I'm not sure if this is what you wanted though
Sat Oct 18 11:36:44 2014
*** Panic Report ***
panic(cpu 2 caller 0xffffff800521e80a): Kernel trap at 0xffffff8005207171, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000020000000038, CR3: 0x00000004460b5004, CR4: 0x00000000000626e0
RAX: 0x00000000000007f8, RBX: 0xffffff801c1c55c0, RCX: 0x0000000000000000, RDX: 0x0000000000000020
RSP: 0xffffff81ee7abbb0, RBP: 0xffffff81ee7abc30, RSI: 0x000000000017ad01, RDI: 0x000000000017ad2e
R8: 0x0000000000000000, R9: 0xffffff801c19bd80, R10: 0x000000000000088d, R11: 0x00000000257f841c
R12: 0x00007fe471a29000, R13: 0xffffff801c1c55c0, R14: 0x0000020000000000, R15: 0x0000000000000020
RFL: 0x0000000000010202, RIP: 0xffffff8005207171, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000020000000038, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81ee7ab860 : 0xffffff800513a811
0xffffff81ee7ab8e0 : 0xffffff800521e80a
0xffffff81ee7abaa0 : 0xffffff800523a443
0xffffff81ee7abac0 : 0xffffff8005207171
0xffffff81ee7abc30 : 0xffffff80051a6d22
0xffffff81ee7abd00 : 0xffffff80051a4419
0xffffff81ee7abf20 : 0xffffff800521ec9c
0xffffff81ee7abfb0 : 0xffffff800523a355
BSD process name corresponding to current thread: mdworker
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000004e00000
Kernel text base: 0xffffff8005000000
__HIB text base: 0xffffff8004f00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 2811383340540
last loaded kext at 74402393740: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f87418000, size 36864)
last unloaded kext at 249516878415: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f85f71000, size 65536)
loaded kexts:
com.globaldelight.driver.BoomDevice 1.1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 266.5
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x859B, 0x43543130323436344246313333392E433136
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x859B, 0x43543130323436344246313333392E433136
USB Device: Hub
USB Device: Mass Storage Device
USB Device: IR Receiver
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: FaceTime HD Camera (Built-in)
Serial ATA Device: Hitachi HTS545032B9A302, 320.07 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H, 3.34 GB
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 16 GB, SMC 1.68f99
Network Service: AirPort, AirPort, en1
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB -
My macbook pro keeps restarting after i put it to sleep.
I have a Macbook pro 15" retina display. I began to have this problem after i installed Yosemite, I put it to sleep and after 20 minutes aproximately, it restarts. Sounds, light, everything.
At first i tought it happened only when i left the screen open, but Even with the screen closed it restarts. I put it to sleep and then, suddenly, i heard the sound of restarting and i verified it when i opened the screen and there was a message that it had occured a problem and the system had to restart.
It didn´t happened with Mavericks.
Any suggestions? please help me.
Thank youI have a Macbook pro 15" retina display. I began to have this problem after i installed Yosemite, I put it to sleep and after 20 minutes aproximately, it restarts. Sounds, light, everything.
At first i tought it happened only when i left the screen open, but Even with the screen closed it restarts. I put it to sleep and then, suddenly, i heard the sound of restarting and i verified it when i opened the screen and there was a message that it had occured a problem and the system had to restart.
It didn´t happened with Mavericks.
Any suggestions? please help me.
Thank you -
Macbook Pro needs restart after sleep...
My Macbook Pro has starting doing this thing where the screen will go darker and it will tell me I need to restart by holding the power button. It happens pretty often when the computer wakes up from being in sleep mode. What's the deal?
Here's a console log detailing a wake sequence with failed Bluetooth and USB.
11/29/07 5:58:05 AM kernel hibernatepage_listsetall start
11/29/07 5:58:05 AM kernel hibernatepage_listsetall time: 334 ms
11/29/07 5:58:05 AM kernel pages 255568, wire 58460, act 36514, inact 14866, zf 73, throt 0, could discard act 17321 inact 127821 purgeable 513
11/29/07 5:58:05 AM kernel hibernatepage_listsetall found pageCount 109913
11/29/07 5:58:05 AM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
11/29/07 5:58:05 AM kernel IOHibernatePollerOpen(0)
11/29/07 5:58:05 AM kernel writing 109692 pages
11/29/07 5:58:05 AM kernel image1Size 125079040
11/29/07 5:58:05 AM kernel all time: 4800 ms, comp time: 2057 ms, deco time: 0 ms,
11/29/07 5:58:05 AM kernel image 208890368, uncompressed 449298432 (109692), compressed 207754412 (46%), sum1 6d35adf1, sum2 4ccdde5c
11/29/07 5:58:05 AM kernel hibernatewriteimage done(0)
11/29/07 5:58:05 AM kernel sleep
11/29/07 5:58:05 AM kernel System Wake
11/29/07 5:58:05 AM kernel [IOAppleBluetoothHIDDriver][setReportWL][00-0a-95-3a-e1-ba] Could not send DATA command via interrupt channel
11/29/07 5:58:06 AM mDNSResponder[15] setsockopt - IPMULTICASTIF error 10.37.129.2 -1 errno 49 (Can't assign requested address)
11/29/07 5:58:06 AM mDNSResponder[15] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00815600 en2/4 to 224.0.0.251:5353 skt 7 error -1 errno 49 (Can't assign requested address) 2256359361
11/29/07 5:58:06 AM mDNSResponder[15] setsockopt - IPMULTICASTIF error 10.211.55.2 -1 errno 49 (Can't assign requested address)
11/29/07 5:58:06 AM mDNSResponder[15] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00819600 en3/4 to 224.0.0.251:5353 skt 7 error -1 errno 49 (Can't assign requested address) 2256359361
11/29/07 5:58:06 AM mDNSResponder[15] setsockopt - IPMULTICASTIF error 10.37.129.2 -1 errno 49 (Can't assign requested address)
11/29/07 5:58:06 AM mDNSResponder[15] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00815600 en2/4 to 224.0.0.251:5353 skt 7 error -1 errno 49 (Can't assign requested address) 2256359361
11/29/07 5:58:06 AM mDNSResponder[15] setsockopt - IPMULTICASTIF error 10.211.55.2 -1 errno 49 (Can't assign requested address)
11/29/07 5:58:06 AM mDNSResponder[15] mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 00819600 en3/4 to 224.0.0.251:5353 skt 7 error -1 errno 49 (Can't assign requested address) 2256359361
11/29/07 5:58:10 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
11/29/07 5:58:12 AM kernel AppleUSBHub::setPowerState(0x460e800, 2 -> 4) timed out after 10495 ms
11/29/07 5:58:12 AM kernel EIR is not supported.
11/29/07 5:58:16 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
11/29/07 5:58:17 AM authorizationhost[302] Failed to authenticate user cshotton (tDirStatus: -14090).
11/29/07 5:58:21 AM /usr/sbin/spindump[369] process 36 is being monitored
11/29/07 5:58:26 AM authorizationhost[302] Failed to authenticate user cshotton (tDirStatus: -14090).
11/29/07 5:58:33 AM authorizationhost[302] Failed to authenticate user cshotton (tDirStatus: -14090).
11/29/07 5:58:36 AM com.apple.SecurityServer[20] Failed to authorize right system.login.screensaver by client /System/Library/CoreServices/loginwindow.app for authorization created by /System/Library/CoreServices/loginwindow.app.
11/29/07 5:58:36 AM /usr/sbin/spindump[369] process 36 is being no longer being monitored
11/29/07 5:58:37 AM kernel hibernate image path: /var/vm/sleepimage
11/29/07 5:58:37 AM kernel sizeof(IOHibernateImageHeader) == 512
11/29/07 5:58:37 AM kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
11/29/07 5:58:37 AM kernel hibernate image major 14, minor 2, blocksize 512, pollers 4
11/29/07 5:58:37 AM kernel hibernateallocpages flags 00000000, gobbling 0 pages
11/29/07 5:58:42 AM kernel System SafeSleep
11/29/07 5:58:51 AM kernel hibernatepage_listsetall start
11/29/07 5:58:51 AM kernel hibernatepage_listsetall time: 332 ms
11/29/07 5:58:53 AM kernel pages 261630, wire 58337, act 42003, inact 12349, zf 74, throt 0, could discard act 18090 inact 127958 purgeable 2819
11/29/07 5:58:53 AM mDNSResponder[15] Note: Frequent transitions for interface en2 (FE80:0000:0000:0000:021C:42FF:FE00:0000); network traffic reduction measures in effect
11/29/07 5:58:53 AM kernel hibernatepage_listsetall found pageCount 112763
11/29/07 5:58:53 AM mDNSResponder[15] Note: Frequent transitions for interface en3 (FE80:0000:0000:0000:021C:42FF:FE00:0001); network traffic reduction measures in effect
11/29/07 5:58:53 AM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
11/29/07 5:58:53 AM kernel IOHibernatePollerOpen(0)
11/29/07 5:58:53 AM kernel writing 112542 pages
11/29/07 5:58:53 AM kernel image1Size 125406208
11/29/07 5:58:53 AM kernel all time: 4773 ms, comp time: 2131 ms, deco time: 0 ms,
11/29/07 5:58:53 AM kernel image 216278016, uncompressed 460972032 (112542), compressed 215103712 (46%), sum1 491547db, sum2 bfc88fc9
11/29/07 5:58:53 AM kernel hibernatewriteimage done(0)
11/29/07 5:58:53 AM kernel sleep
11/29/07 5:58:53 AM kernel System Wake
11/29/07 5:58:56 AM mDNSResponder[15] Note: Frequent transitions for interface en1 (172.30.2.41); network traffic reduction measures in effect
11/29/07 5:58:56 AM mDNSResponder[15] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021C:B3FF:FEC5:BB5E); network traffic reduction measures in effect
11/29/07 5:58:58 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
11/29/07 5:59:00 AM kernel [IOAppleBluetoothHIDDriver][setReportWL][00-0a-95-3a-e1-ba] Could not send DATA command via interrupt channel
11/29/07 5:59:03 AM kernel AppleUSBHub::setPowerState(0x460e800, 2 -> 4) timed out after 10964 ms
11/29/07 5:59:03 AM kernel EIR is not supported.
11/29/07 5:59:06 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
11/29/07 5:59:08 AM /usr/sbin/spindump[369] process 36 is being monitored
11/29/07 5:59:10 AM /usr/sbin/spindump[369] process 36 is being no longer being monitored
11/29/07 6:00:23 AM kernel BT_USB Controller: SuspendDevice(0) failed with error e0004051
11/29/07 6:00:23 AM kernel BT_USB Controller: SuspendDevice(0) we are still connected to our hub so .. plain reset 0x4693a00
11/29/07 6:00:54 AM kernel CSRUSBBluetoothHCIController::setPowerState(0x4704000, 1 -> 2) timed out after 50695 ms
11/29/07 6:03:39 AM /usr/sbin/ocspd[390] starting -
MacBook Pro needs restart after wake up
I recently upgraded the hard drive (to 1TB) and RAM (to 8GB) of my late 2008 MacBook Pro, as well as performed a fresh install of Yosemite. My system has been running pretty fast and well; however, when I put my notebook to sleep and wake it up, it won't run programs. Files won't save, programs will quit before they start, and web pages won't load, and this is after wake up. When I restart the computer after this, it returns to normal working order. I can shut down and restart when I need to, but I would like to be able to use sleep/wakeup when I can (which was working fine when I had Mavericks and the older HDD and memory). I was wondering if this was a problem with Yosemite, as I have been seeing some issues with this functionality with the new OS, or if it is a problem with my new hardware. Thanks in advance.
Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
Put hard disks to sleep when possible
Step 4
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.
Step 5
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Step 6
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down.
You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
MacBook Pro wont start after 10.8.3 update
So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?It sounds like your internal drive is failing, or has failed. What backups do you have?
-
Macbook Pro Constantly Restarting after Upgrading to Mavericks
Upgraded this afternoon and Macbook will not stay up for more that 3 minutes before restarting and giving the message that it is restarting because of a problem.
Known GPU problems with MacBook Pro 15" Mid 2010 systems
https://discussions.apple.com/docs/DOC-5681 -
New Macbook Pro Wont turn after discharge
Hello everyone,
I just purchased my 3rd mac in the past 2 years, yeah that's how hooked I am, now windows free 99% and love it...
My brand new macbook pro has a very annoying issue.. if I use it on battery power and it discharges completely I have to wait up to 15 minutes after connecting it to power to be able to turn it back on again. this is so frustrating as I am sometimes doing some work and have to get away from the computer for a few minutes.. If it discharges within that time and I come back to continue my work guess what.. I need to wait all this time even after connecting it to power to resume my work...
Does anyone has the same problem? is this normal? I've searched google and haven't found the same problem on anyone else unless they are OK with that and just don't report it... I've never had this problem with any other laptop I own and is extremely annoying, my wife's macbook doesn't do that, if it discharges and goes to sleep you can just connect the magsafe adapter and it will come right back up.
your comments will be greatly appreciated.My MBP has always come back immediately. So has my old iBook. I rarely discharge my battery completely, but will do so on occasion to calibrate it. But I have never had the problem you describe. My personal opinion is that the long delay is definitely not normal.
Out of curiosity, next time your Mac shuts down like this, remove the battery and see if it will start up immediately. If it does, you could possibly have a faulty battery. If it still takes a lot of time to start up with the battery removed, there is something else wrong. I have never heard of anything quite like this. Since you didn't mention excessive heat, that wouldn't be a factor.
Be sure you can reproduce the condition for the Apple genius. They have to see it to be able to do anything. Go in a bit early with a low battery and run it out in the store, so you can show them exactly what it is doing.
Good luck! -
My Macbook Pro wont boot after upgrading to SSD, A ? Mark on Folder appears
Hello all,
I just put in a new SSD into my mid 2012, 13" macbook pro. This is the exact SSD http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=77394 89&tab=7&SRCCODE=WEBLET03ORDER&cm_mmc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals &utm_source=EML&utm_medium=main&utm_campaign=WEBLET03ORDER&cm_lm=noahbragg@cedar ville.edu
I swapped out my optical drive and put in the SSD using this tutorial, http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Dual +Hard+Drive/13787 Everything seemed to go fine and i had no problems. But when I tried to start up the computer it stayed on a gray screen and a foler with a question mark on it, showed up blanking. I have looked all over for the internet for the answer, I have tried to reset the PRAM but it did nothing. I then tried to select what drive i wanted to boot from by holding the option key when i booted, but when the options came up, SSD or old harddrive did not come up as a way to boot up. There were some internet options to recover but they did not work.
The SSD has nothing on it at this point, but my plan was to boot up using the original HD and then clone it over to the SSD, but ovbiously i cant even find the HD to boot to. I have seen that people are having troubles with booting to their SSD because of the new mavericks update, but i am just trying to boot to my original HD at this point.
I also considered that maybe i possibly damaged the HD cables through static electricty, but when i searched more about it i learned that i should have heard snap or felt a jolt. None of these things happened when i installed the SSD. So i beleive that the hard drive or SSD are not broken in any way.
Does anyone have any ideas or suggestions on how i can fix this? Need my computer very badly! thanks in advance.I also forgot to mention that after the first time i tried to boot, it went to the normal screen where it wanted me to put in my apple id password. but the loading wheel was just spinning the whole time. so i turned off the computer and tried again. thats when the question mark folder came up and kept coming up everytime after that.
-
I recently restarted my macbook pro and as a result it will not restart. It is displaying a white screen and it shows my user login and guest user login but whenever i enter my password it loads to about half way then stops, displays an error message then shuts off the computer making me do the process all over again. what is this problem???
I would try to restore OS X from your recovery disk.
Barry -
Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: PanajevHi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom -
My iMac wont restart after my last update alumni keyboard
Please help, I am using my MacBook for this, my iMac will not restart after installing the last update, alumni keyboard....., after restarting, pushing the start button, all i see for hours, is the apple logo with the little circle spinning under the logo, please help, i already, disconnected, unplugged everything, used my original keyboard and mouse instead of my bluetooth, but nothing works, even ,power on while pushing option button etc. Anyone else know of this problem.Thanks in advance!
The long tone is an indication that a firmware update is installing. Do you get a progress bar at the bottom of you screen after letting the power button go?
Have you reset the PRAM? (cmdalt+PR when you restart the machine)
Also repair permissions when the machine is up and running. -
My macbook pro and iphone4 after newest ios update has had wifi issues, very very snail pace slow
um i recently last week? updated my macbook pro and my iphone 4 to lastest ios, and ever since then my wifi has been slow,
by this i mean, when i click anything, it takes a long long time to load a page, and even my facebook (arrived via bookmarks bar) so i load the same way as before, page often loads imcomplete, or not at all, on my iphone its so bad i cant even check my email, or the weather app, but on my ipod4, it works fine, cuz i have not updated the ios on the ipod touch 4th gen
is anyone else having these issues? so far ive been able to confirm (via xbox 360) that wifi signal is fine, strong and normal..... did apple screw up my devices? and if so? please tell me how i fix this, streaming my weekly 13 episodes of tv shows is now like dead slow, with every 5-8 seconds of video watching, theres another 30-40 seconds of SPINNING circle... i am so fed up
im a creature of habit, ive not changed the way i do things, the location of my computer, nothing, everything is as it was 2 weeks ago.... some-buddy help!?I refer you to the TM expert
http://web.me.com/pondini/Time_Machine/14.html
As a extra precaution I would copy the user file folders of Music, Documents, Pictures etc to another external drive and disconnect, just in case.
Always maintain TWO backups of your data at all times, since your messing with one, you need another until your back at two again.
Maybe you are looking for
-
URLStream - does not fire IOError on network cable unplugged while downloading!!!
Hi. I a using the example from the URLStream Class documentation to download files from a web-server to my computer. The problem is that I have unstable connection and sometimes the computer goes offline. Then the download progress stops and none of
-
Very simple question: using XWS to generate static data
Hi, I'm testing interop for JWSDP and a soon-to-be-released RSA Security, Inc. product that will also provide WSS as well as XML signatures, XML encryption, ... I have already used JWSDP -- xmldsig -- to generate a bunch of XML docs that were signed
-
Hi SDN friends, I have an existing implementation configured. Now, there is a need to customise the loading for new companies. So, this means existing solution implemented already must not be changed. I think I will base on existing solution. Is it p
-
Month in date field on notes and Mail is garbled
When i bring up notes, the month in the date field on the top right is garbled. It appears to have the correct number of characters for the month, but the characters are strange characters. How do I get the month to appear correctly? Thanks
-
C++ Call to DLL made in LabVIEW Fails the second time it is called
I have an application where a C++ executive calls a LabVIEW DLL (a LabVIEW application built into a DLL). The executive calls and operates the DLL fine the first time (NT, the applications task manager shows LabVIEW runtime runs, then stops when the