My MacBook Pro wont start

I know this has probably been asked a million times, Im not sure if this has anything to do with whats up with my mac but i just installed the latest update and once I shut it down and rebooted it after a few days nothing happened other than it kept booting into windows from the bootcamp as if it was completely bypassing the apple start up and going into windows start up, I cleared the NVRAM and that seemed to be progress and got me onto the Apple logo but it just then freezes on that, a load bar seems to appear for almost a second and then it turns into the circle of death and just spins and spins and spins, you get the point! I tried single user mode as I seen on another site but once I put in /sbin/fsck - fy it goes through the "phases" it just says start up disk full, its not full however it has at least 10Gb of space left.
Any help would be Appreciated!
Thanks

it just says start up disk full, its not full however it has at least 10Gb of space left.
Your HD is full! How large is your HD? You should never let your hard drive get to where you have only 10-15% of space left. You need to do some serious housekeeping. However, you need to get to your desktop to do that.
Can you safe boot? Read the threads over in the "More Like This" column over here.----------->

Similar Messages

Macbook pro wont start with 3 beeps

hi
Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
Thanks

Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

Macbook pro wont start, click when charging thats it

Hello,
I have a Apple Macbook Pro 15" model number: A1286 purchased in january 2011.
It wont start and has a very faint clicking noise when it is trying to charge. When the charger is on it the light is bright green but the charge button to show you the life left in the battery will not work as wont the screen or anything else.
Could someone asist me and let me know whats wrong with it please.
Regards,
Jimmy

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue.

MacBook Pro wont start, and is to hot

My Macbook Pro won't start and the bottom of it pretty hot. The light comes on like its in sleep mode, but wont power up.

nosaj49854 wrote:
Thank you very much, it just started back up, i thought thats what the problem might of been.
You're welcome. Glad it's working for you again.

MacBook Pro wont start after 10.8.3 update

So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

It sounds like your internal drive is failing, or has failed. What backups do you have?

Macbook pro wont start up and clicking sound

Hi everyone
My girlfriend spilled a coke on my computer couple days ago and my MBP shut down immediately. After all i took it to the apple store in Turkey and they said the problem is from the battery and they took it off and I started to use it on charge until i get a new battery. All day i used my macbook pro on charge without battery on it. Anyway I turned my computer off and next day press the power button to start it up and it didnt start up at all. Mag safe works OK. Charger light is green light and everytime i press the power button I hear a clicking sound and my built in cam light is lighting up. I couldnt figure it out what is wrong.. If you guys had any problem like this before or know the problem about it please share it with me.. I will be appreciated.. Thanks

Problems related to liquid damage can manifest in different ways.
It is hard to recover from liquid damage.
Best.

Macbook Pro Wont Start Up After Update

Hey All,
I was in the middle of installing the most recent update for OSX when my computer froze completely. I shut it off by holding down the power button. Now, when I start it up, right after the apple, it goes to a screen with some script in the upper left hand corner, and a box in the middle with a picture of the power button telling me I need to restart. I've restarted it several times and it just keeps going back to that screen.
I have booted it up from the install DVD and run disk repairs and verifications, as well as checking the system profiler and utility, and nothing seems worng. I've tried starting it up by choosing to start up from the folder and it still didnt work.
If you've got any ideas, let me know. All your advice is appreciated.
Thanks!
Macbook Pro Mac OS X (10.4.8)

I meant to say that the system would have been made unstable after the semi-complete update (if it was in the middle of replacing a crucial system file).
An archive and install would replace all system files, so wouldn't hurt anything. You might have to reinstall any system-intrusive applications (Palm Hotsync springs to mind, if you have that) but it will certainly fix system corruption, if that is your issue.
After the reinstall, if you encounter a complete freeze again, then I would definitely be suspicious of hardware. Possibly the original RAM, but it could be somewhere else in the system, such as the logic board. In those cases, you would have to go back to Apple for repair. (Your Macbook Pro, that is, not you.)
Matt

Installed new memory and Macbook Pro wont start.

I bought a total of 8GB from PNY for my mid 2009 MacBook Pro (2.8GHz Intel Core 2 Duo). I installed it and my macbook wont turn on. When I press the power button it just beeps. The LCD doesnt turn on. I reinstalled it a few times to make sure that it is sitting correctly with no luck. I reinstalled my old memory (2x2gb) and it works fine.
The new memory I bought is PNY 8GB (2x 4GB) Bual Channel DDR3 PC3-10666. The package says that it is compatiable with 1333MHz and 1066MHz. This is the listed memory on the PNY website for Mac laptops.
Am I using the worng type of memory? I'm pretty sure my MacBook Pro can take 8GB...right?
THANKS!

One beep indicates no RAM installed. See http://support.apple.com/kb/HT1547.
What happens when you reinstall the old original memory? Does the computer boot then?
You might want to read the information at macsales.com (OWC). Certain models had to be updated to take additional memory.
Specifically the NOTE: on this page: http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

Macbook pro wont start flashing question mark.

I sold a macbook pro i owned since new and it arrived with the buyer yesterday now im getting death threats!
I freshly installed 10.5 leopard on my mbp and used it for 4 hours without issue.
I did have a problem after installing ms office and deleted it and all preference files in same folder and worked ok after that. rebooted 3 times no problem.
The buyer is freaking out saying its trashed and wont boot just has a flashing question mark, why would this be happening???
Please help he's threatening me!

Just replace the hard drive.
If he lost data, look at data recovery services*:
http://www.macmaps.com/backup.html
And in the future always recommend people backup important data frequently.
If he still gives you death threats, call the police.
- * Links to my pages may give me compensation.

MacBook Pro wont start up passing the grey screen, MacBook Pro wont start up passing the grey screen, MacBook Pro wont start up passing the grey screen

; my macbook pro is a 15" . i believe its a 2010 model , i left it on by standby last night . and this morning the internet wasnt working , so then i decided to restart my laptop . and so right now , i start it up . and it gets to the white apple screen when it first load , then all of a sudden it shuts down on me . before it shut down by it self it was on the apple screen , loading and loading . couple of people had said it was the battery but im not sure . i hope theres any help , i appreciated . thanks .

I found this link.
http://techtips.salon.com/create-mac-recovery-disc-2797.html
It explains that you must install Snow Leopard to an external drive or LARGE USB Thumb drive, at least 16GBs in size, and then boot the system from that external media and run disk utilities from there on the internal drive.
So if you have a LARGE USB thumb drive or a external hard drive you can continue this to see if the internal hard drive has failed. If not you could buy one tomorrow or take the system into a Apple repair center.
Wishing you the best of luck.

Macbook pro wont start up

Help! My macbook pro from 1 year old won't start up. all I see is the grey screen with apple en the spinning wheel. Someone help?!

Start with these instructions:
http://support.apple.com/kb/TS2570
Ciao.

Macbook pro wont start from disc

Recently i let a friend barrow my macbook pro and i wanted to completly erase its hard drive and to do that you have to put in the install disc and hold C at startup all of that i understood but the problem is whenever i hold C at start up it just gets stuck at the apple with the pinwhele and just stays there i even let it go overnight and when i woke up the next morning it was still going please help

The correct DVD for your Mac must be in the drive. The last "Full Retail" DVD for Snow Leopard has only 10.6.3 on it, and will not boot a whole lot of recent Macs. The one that shipped with your Mac will always work, provided your DVD rerader is working.
If C does not seem to work, try holding down Option at Startup. That brings up the ROM-resident Startup Manager, which draws an Icon for each bootable drive available. Choose the one you want and proceed from there.

Macbook Pro wont start up (Apple logo and spinning thing all I get)

When I turn on my macbook pro I get the “tone” the Apple logo and the spinning thing but then the spinning thing just freezes up and does nothing for ever. I let it just site like that for 30 minutes then it just goes to black. It is plugged in so power is not an issue.
I tried to boot up in safe mode and again I get the tone the logo then the bar to show the safe mode then the spinning thing then nothing. I did boot it up via firewire target mode and was able to see the hard drive and all my files on my imac so the hard drive works (I think).
I do have the original install disk and am willing to start the computer fresh but have no idea how.
So any suggestions???
I also tried to turn on and run the repair mode I think that’s where I held down a key the screen went black and some commands ran then I typed somting like flvr - fv
Thanks Brad

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Bad System call. Macbook pro wont start up

Hello,
I seem to have come across a problem. I thought it happened after trying to install new software through X11. I restarted my macbook pro and received about 15 error messages all containing information about certain extensions not being installed properly. I remember one being about my 802.11 airport but I havnt altered anything to do with it.
When I turned my macbook off and on again I got a black screen with info about about bad system calls, throttling too quickly etc..
I noticed a number of people mentioning the i tunes update which I tried to install before it completely died and it wouldnt actually finish the update so i just force quit software updates. Now my machine doesnt do a thing: when I turn it on I receive the apple symbol with the spinning cog and eventually it goes back to the black screen with the bad system info.
I started in single user and tried fsck - fy and it said everything was ok. I tried to start in safe mode however when I turn my macbook pro on I dont hear the chime- therefore I dont seem to be able to enter safe mode.
If anybody can help ASAP it would be much appreciated- got lots of work that needs doing on it:)
cheers
Graeme

Try here > Mac OS X: Gray screen appears during startup

Help! Macbook pro wont start!

So I have recently replaced my old HDD with the new Corsair 128GB SSD and everything was great. The installation was fast and it worked flawlessly.
One fine morning, it refuses to start. I press the power button and it would just start for 1 sec then turn off. I opened the macbook pro up and put back the old hdd just to see whether its the SSD but even then it wouldn't start up.
Any idea what could be wrong? I have double checked all the wires and everything which looks fine. Please help!

Insert the Applications DVD that came with the MacBook, press D key when your computer starts and run the extended test two times. If you haven't got a DVD, press D key when your computer starts

Macbook pro wont start but autoshutdown & autostart

push start all dark except led after few sec autoschutdown and start again smc, pram, with and without battery reset. same withouth ram
i disconnect all visible connectors same only i disconnect 1 cable it do nothing but i dont know wich connector it is
doesnt take cd or usb

Howdy xVaGuEx,
If your MacBook Pro is shutting down unexpectedly durning startup, I would suggest that you troubleshoot using the steps in this article -
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

My MacBook Pro wont start

Similar Messages

Maybe you are looking for