My macbook refuses to charge no matter what i try, help me please

i have a macbook pro early 2011 that refuses to charge, ive tried resetting the smc and nothing changed, ive bought another power adapter still the same issue.
my cycle count is 424 and the condition is normal.
ive taking it to get checked and they said its fine and nothings wrong yet it still wont charge
sometimes a light appears but its not charging or running on the power adapter and there are very rare moments when it does finally charge but they appear once a week for 30 mins
i have done everything i can think of and got no results does anyone have a suggestion that could possibly work because ive run out of ideas
help.. please

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Similar Messages

  • My battery won't charge no matter what I try

    It may be that the battery is just getting old and needs to be replaced, but I'd rather not drop $130 if there's some way to fix it.
    As of this post, my battery level is stuck at 45% and, according to the drop down menu on the battery icon, is not charging. My power adapter is clearly supplying energy because the battery life only drops when I unplug it and the green light is lit on the plug. My battery cycle count is at 54, but the condition says "check battery".
    My Macbook Pro is just over a year old but the battery has been acting strange. Sometimes my computer would just turn off randomly when running on battery power, sometimes as soon as 74% life. This problem inexplicably went away on its own.
    Later, I had a problem where, even though plugged in, the battery would continue to drain all the way to 0%. I followed the instructions for an SMC reset and the battery started charging again properly.
    This time the battery is just stuck at 45%, and I've tried restarting normally, resetting the SMC, and a PRAM reset. I've even tried the SMC reset method with leaving the battery out for an extended period before returning it to the notebook and starting up again (basically I've tried a variety of things that I've read from surfing help forums on this very topic in hopes that it would also solve my similar problem). However, it remains at 45% and refuses to charge (unless I were to unplug it, at which point that 45% would begin to drop).
    Does anyone have any ideas? Obviously it's a pain to own a laptop that must be plugged in at all times to run, but I'd rather only replace the battery as a last resort, $130 is hard to come by as a typical broke college student.

    Yo MR, howzit;
    So, you got coconutbattery utility? http://www.coconut-flavour.com, donation-ware: awesome. My MBP is like 49% of original battery capacity; 132 load cycles; sounds lame but I am surviving.
    Yeah, buying a battery ... Nothing like a new battery; which entails an expenditure. There were threads here last year about an AAPL credit for certain battery serial #s; search this forum. Else, keep trying: have you calibrated? The SMC reset; maybe try it again? Good luck; post back!
    http://docs.info.apple.com/article.html?artnum=86284
    Calibrating your computer's battery for best performance
    http://support.apple.com/kb/HT1411
    Resetting an Apple portable's System Management
    Controller (SMC)
    MacBook, MacBook Pro
    1. If the computer is on, turn it off.
    2. Disconnect the AC Adapter and remove the computer's battery.
    3. Press and hold down the power button for 5 seconds and then release the button.
    4. Reconnect the battery and AC Adapter.
    5. Press the Power button to restart the computer.

  • My iphone will not connect to wifi no matter what i try.HELP

    my iphone will not connect to wifi no matter what HELP

    Have you tryed to restore the iPhone too ?
    Restore the phone in iTunes using a backup, and if needed as a new iPhone, without using a backup.  However, the greyed out WiFi is often due to a hardware failure requiring replacement of the phone.
    This may help http://manuals.info.apple.com/en_US/ipod_touch_user_guide.pdf

  • Trying to sign in and get 5002 no matter what I try, help?

    I am new. My iPhone4 is on it's way.
    I have an account from when my husband had an iMac.
    My account is still good. I can log in online but I can't do it through iTunes.
    The bellow picture is what I get.
    I am opperating on Windows 8 beta and cannot change that.
    I cannot set up with another computer because this is the only one.
    HELP what do I do. I was told I have to have iTunes working to activate my phone
    when it gets here.
    As you see, I have JUST downloaded iTunes via link from Verizon sent me to iTunes for most recent version.
    And this is what I get every time trying to sign in.

    Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Cannot get my comp reset to factory setting no matter what i try!! Please help!!!!

    I have an elitebook 6930. I bought it offline used and it had some PGP encryption thing on it and was a part of a network...so needless to say i really have no access to anything on it until I get it restored to factory ssettings...so i found online that i had to decrypt the pgp files then it could be removed, well i decryted them and it still cannot be removed...not an option!
    This comps sticker on the bottom say windows 7 pro yet the os on it is old school windows xp!
    I want it back the way it came, windows 7 and everything wiped....now here is the issue...I have no access because i am not the administrator of the network it says. I have tried using a windows 7 recovery disc, it boots fine but then get an error when i try to install it....pressing f11 does absolutely nothing. I have went thru every other option there is and cant get nothing to work. Now it doesnt even load windows at all! I tried doing it in safe mode even and it just locks up....PLEASE HELP!!!! 

    Many business users chose to use the downgrade option to XP until Windows 7 had been out awhile longer ,which may be what happened on your machine. Where I work, most all of the machines still run XP.
    Recovery Disks contain the OS and all drivers/software for a specific model. A plain Windows disk contains just the OS.Not sure which you have, but a true Recovery Disk set will not work on any machine.
    It really sounds like you have a Windows Repair disk which requires a backup image to repair an installation.Could you confirm what exact disk you have?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HT5848 Since iTunes Radio is now in Canada, all my devices are up to date, (iTunes'11.1.5', my macbook'10.9.2', and my iPod and iPhone'7.1', but still no iTunes radio on any of them no matter what i try. any help?

    Since iTunes Radio is now in Canada, all my devices are up to date, (iTunes'11.1.5', my macbook'10.9.2', and my iPod and iPhone'7.1', but still no iTunes radio on any of them no matter what i try. any help?

    iTunes Radio is not yet available in Canada.
    According to this Apple Support page, it is currently only available in the US and Australia which is revealed half-way down the page, between the two matrices.
    For those with an aversion to scrolling, or with TL;DR issues, simply ⌘-F "iTunes Radio availability by country".

  • No matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?

    no matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?
    I have windows 8 and ive tried everything i can to open it but it refuses to let me.

    Let's get some information first.
    What is your version of Adobe Camera Raw, Bridge, and Photoshop?
    What files are you trying to open in ACR? If Raw, for what camera model?

  • My ipod 5 won't turn on at all no matter what i try

    my ipod 5 won't turn on at all no matter what i try.
    even though I try to charge it it wont charge and it wont turn on.

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod Touch 4gen turn on or reset no matter what I try?

    My iPod Touch won't start no matter what I try. For a while it wasn't being used and when I tried it wouldn't turn on. I tried charging it thinking it just might be dead but nothing still. Plugging it into the computer doesn't help neither. Also when Iplug it in iTunes does not open up like if it's responding to a device. I've tried the holding down the home botton and power down for seconds but again nothing.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • ITunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verizon 11.0.2.26 but no matter what I try it does not connect. HELP P

    iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I have just updated my iTunes to 11.1.3. I followed all correct steps, restarted my computer etc. But iTunes will now not open no matter what I try and do. Please help me!!!!!!!!

    I have just updated my iTunes to 11.1.3. I followed all correct steps, restarted my computer etc but now I cannot open iTunes not matter what I try and do.
    Very frustrating. Have read the trouble shooting info on Apple website but nothing has worked.
    Someone please help. I cannot access any of my music.

    Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.

  • Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. 4.3 os ive tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway?

    Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. I have tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway i try. I have searched answers to this but to no avail.
    Leigh

    Hi Demo,
    Yes, I have not made myself clear, I apologise.
    I have tried downloading apps from itunes in order to set up a game for my son, when I go to click on a link, be this in itunes, or on the web, Safari revolts back informing the address is invalid. I read by coping a link and pasting into the URL, this would do it, but not so.
    My goal then, is to install Minecraft for my son, I would then download an app to allow this but I am unable to get this far due to Safari insulting the address I ask it to go to
    The iPad is first generation
    OS 5.1.1 Software up to date.
    Thank you in advance for your time

  • Excel (Office 2010 64 bit) will not connect to Oracle DB not matter what I try

    Hello Everyone,
    I started a new role that requires me to interact with an Oracle DB using Excel.  Currently I have both the 32 bit and 64 bit Oracle clients installed on my Windows 7 PC. 
    Firstly I can TNSPing the database I need to connect to, I can also connect using SQLPlus to the desired database, I can even connect using TOAD.
    No matter what I try I cannot connect using Excel VBA (Office 2010 64 bit).
    The process below used to work for me in a different location, now the objDatabase always is returned "Empty"
    Set objSession = CreateObject("OracleInProcServer.XOraSession")
    Set objDataBase = objSession.OpenDatabase("database server", "user name/passsword", 0&)
    I am not even able to set up a simple ODBC connection working.  I get a error "ORA-12557: TNS:protocol adapter not loadable."
    When using a ADODB connection I get this error. Run time error '-2147467259 (80004005)':
    [Microsoft][ODBC Driver Manager] Data source name not found and default driver specified.
    I have place the TNSNames file in both Oracle Home's
    I have even reinstalled Office 2010.

    Hi,
    The 12577 error (12557: TNS:protocol adapter not loadable) is related to Windows Environment or Oracle Home PATH because sqlplus command works smoothly when I execute it inside ORACLE_HOME\bin.
    There are two solutions to this issue:
    1. Put the Oracle DB Home in front of the other paths in the PATH environment variable.
    2. Remove ORACLE_HOME From environment Variable and re-boot PC
    http://www.dba-oracle.com/t_ora_12577.htm
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If you have further question about the ADODB, I recommend you post the question to MSDN forum:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
    Regards,
    George Zhao
    TechNet Community Support

  • TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

    i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

    it still blinking with the apple sign

  • My iMac has a Kernel Panic screen come up on start up and I can't get past it no matter what I try. Any help to fix this would be greatly appreciated.

    My mac has a "Kernel Panic" screen come up on start up. No matter what I try I can't get past this to fix it. Any hints out there? Do I have to completely wipe my drive and re-install to fix this? I can't even back up my files before doing this as like I say I can't get past the Kernel Panic message.

    There are some fairly informative articles about kernel panics...
    •OS X: About kernel panics:
    http://support.apple.com/kb/TS3742?viewlocale=en_US&locale=en_US
    Note the toggle triangles to get more info in the above article, some are
    important steps, with alternative methods of accessing or performing a
    suggested activity and may vary with the OS X version in use.
    •Resolving Kernel Panics:
    http://www.thexlab.com/faqs/kernelpanics.html
    •Technical Note: TN2063: Understanding and Debugging Kernel Panics:
    https://developer.apple.com/library/mac/technotes/tn2063/_index.html
    The above TN covers several technical aspects to identify & troubleshoot.
    Some are above the average user needs, but still can be rather helpful.
    Hopefully you can get past the kernel panic screen, there are several
    ways to attempt to do that, however if the issue is hardware, a reinstall
    of the OS X may not cure the underlying cause of the symptom.
    Good luck & happy computing!

Maybe you are looking for

  • Links in Reports Not Showing Correct Data

    Good Afternoon! I've recently found that the links in some reports are not working as they should.  Below is an example from a report I just tried: Example I ran the report "Count of all instances of specific software registered with Add or Remove Pr

  • The Calculator example

    Hello! I have runned th calculator RMI example in the tutorial. But it seems to work only when i run both the server and the client on the same machine. I get this error message when i try to connect the client to the server on a separate machin: Rem

  • Parameter in SYS_CONTEXT('USERENV'

    Hi, is there any parameter in SYS_CONTEXT('USERENV' that shows the name or IP adresse of database server ( machine on which DB is running) ? many thanks. I know the followings but non lets know (but if I'm wrong). SYS_CONTEXT('USERENV','TERMINAL') te

  • Buffering for all InfoObjects

    Hi BW Team, Where can i switch on number range buffering for all InfoObjects where a high number of tuples are loaded? And also for number range buffering for dimensions. Can anyone send the info on this ? Best Regards, --Laks.

  • Internet explorer Enterprise Manager connectivity on the 2nd database

    I am using oracle 10g release 2 on Linux red hat. I just created using DBCA utility another database on the same oracle instance. When i try to connect using Internet exploere Oracle enterprise manager it goes to the connectivity of the 1st database.