My macbook says runtime corruption detected on macintosh hd, fsck will be forced on next mount.
Help
Your disk is corrupt. Reboot and see if fsck is able to repair the corruption.
If not post error here and we will help with a solution.
Allan
Similar Messages
-
Runtime corruption detected on Macintosh HD, fsck will be forced on next mount
I encountered this message when i attempted to follow the Command + S upon bootup because everytime I login, it will go back to the login screen.
Do you have an up to date backup? Your HDD is failing and needs to be replaced.
Runtime Corruption detected on Macintosh Hd -
Runtime Corruption detected on Macintosh Hd
Runtime Corruption detected on Macintosh Hd, fsck will be forced on next mount.
Hfs_swap_BTDNode:record #-1 invalid offset (0x0000)
Hfs: node=14669 fileID=4 volume=Macintosh HD device=/dev/disk0s2
0 [level 3] [ReadUID 0] [Facility com.apple.system.fs] [Errtype FS] [MountPT /]
What does this mean and how do I fix it? It came up during safe boot which I used because I have the gray screen with apple logo and waiting that won't let me log all the way onto the computer.It means your drive has malfunctioned. Ideally you should replace it. If you prefer to risk continued use, you should erase it and restore from a backup.
-
Hfs: Runtime corruption detected on my external Back up disk
Using Drive Genius 3 on my iMac.
I received an email from this application with Re: Drive Genius: DrivePulse™ Drive Integrity Warning.
The message states:
A potentially critical system error has occurred:
hfs: Runtime corruption detected on FreeAgent GoFlex Drive, fsck will be forced on next mount.
The volume should be repaired as soon as possible.
How can this be done?Using Disk Utility to verify or repair disks
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2 -
TS2570 After performing verbose safe boot - runtime corruption detected on HD
Are their any other steps to resolve other than a disk replacement and complete restore ?
Did you boot off the DVD and run Disk Utility/Repair Disk? What steps have you tried? What OS are you running?
-
MacBook Pro won't get past gray start screen - RunTime corruption error
Hi, I am a novice when it comes to fixing things, so I will make a Genius Bar appointment, but I thought I would consult this community first in case anyone has experienced this same issue:
I was using my 13 in. MacBook Pro this morning after not using it for a couple weeks. (It was running fine last time.) It started up fine, and the few applications I was using worked OK. Then I got an error saying I needed to update my Java in order to access my work VPN. I didn't think twice about downloading the Java upgrade. Once the Java download was complete, I thought I might need to restart to get the VPN to recognize the update. And that was the last time I was able to see my desktop. I restarted, and the could not get past the gray screen. I did this twice. Then I did a safe boot (showing the status of the progression), and that when I saw this message over and over and over:
hfs: RunTime corruption detected on MacIntosh HD, fsck will be forced on next mount.
hfs: BlockMarkFreeInternal () trying to free unallocated blocks (10865570,8) on volume MacIntosh HD
(I snapped a pic with my phone - that's how I transcribed it.)
This ran for about 20 minutes before I suspected it wasn't actually doing anything, and I forced it to shut down by pressing the power button.
I just tried to start it again (fingers crossed, hoping for a miracle), but no such luck. Does anyone have any ideas? Is all lost? Thank you in advance for any recommendations!
JenniferI should add that I don't know if the Java download is responsible - could just be a coincidence that it was the last thing I did/downloaded before restarting.
-
About a year back i had replaced the MLB of my early 2011 macbook pro and it was all working fine. A month back my battery went dead saying "Battery Not Detected". I went to Ample technologies, Bangalore, India and gave it for diagnosis. Ample technologies are the authorized Apple support service in Bangalore, India. After 3 days and no phone calls they email me that "They feel that the MLB MIGHT be the problem and they want to test it by replacing the MLB and i have to pay for their testing". I had already spent 40k indian rupees ($700) less than a year back to replace an MLB and now they want to replace it again at the cost of 43k ($750) indian rupees. I have no idea what to do now. Spending 80k indian rupees ($1400) in less than a year to replace the MLB twice sounds unfair to me. Can someone help me out here ? Is there a valid warranty period applicable , since i have changed the MLB a year back ?
short of doing a SMC reset, you maybe at their mercy.
resetting the SMC http://support.apple.com/kb/ht3964
You can try yourself running the Apple Hardware Test- and see if it generates any error codes. Post the results
AHT http://support.apple.com/kb/HT1509 -
I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?
Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer. -
My MacBook Pro says camera not detected when I adjust my screen!
i have had my macbook pro for about a year now and sometimes when i am using facetime and adjust my screen my picture will freeze and when i restart the program it will say camera not detected. why does this keep happening and should i take it to a store to get checked out, is this fixable? help!
Sounds like a cable has slipped out of a connector, seeing as they go from "under the keyboard" and up by the display. You should get it checked out. I had a similar problem, but then it was my display that went to sleep when in 45°. I fixed it by just closing and opening the screen all the way a few times. Tried that?
-
MacBook Pro does t start I turned it off during start up I've tried a lot of stuff. When I hold startup my hard disk says efi boot instead of Macintosh hd
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If this does not work, then you will have to erase and reinstall Mountain Lion:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?
Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you -
I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.
Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.
The application Safari can't be opened -1712
What to do about "The application 'Safari' can't be opened" -1712 ?
Maybe you are looking for
-
I only use my ipod touch for downloading audio books with Overdrive and do not use itunes on it. Today I charged my ipod on my mac, and my mac screen now tells me that itunes has detected that my ipod is in "recovery mode" and I need to "restore"
-
Implementing drag and drop across components with drag image...
Hey all, Finally got the hang of drag and drop. Not too hard, but a little time consuming. I found an article showing how to capture and drag a BufferedImage within a JTree. When you click and drag a node, it creates a BufferedImage of the node on sc
-
Exchange 2010 DAG's - 4 Mailbox Servers in 2 Datacenters with per site redundancy
I recently came into a company with an Exchange 2010 sp1 environment where there are two data centers in two different subnets (10.70.62.0 and 10.80.56.0) Each datacenter has 2 mailbox servers (4 servers total) but their plan was to have only enough
-
VL01N delivery saves triggers Proforma Invoices through delievry output typ
HI Gurus, Iam facing one issue related to work flow, senerios is sales order- once delievry saves, it triggers one output type ZGF8, and it triggers Proforma invoice type ZGF8. In delievry output type ZGF8, we have output program Z_EVT_LIKP_OUTPUT, a
-
After Mountain Lion installed, 27" late 2009 iMac won't sleep
As the title says..... Worked fine since new, but with Mountain Lion, it won't auto sleep. I have a numbe of iProducts, but only this one isn't working. Energy saver settings are fine. Desired behavior is after a few minutes the screen goes dark, the