My macbook wakes up from sleep by itself all the time.

When the lid is open and it´s been inactive for some time it wakes up and then goes off by itself according to my settings in power and battery.
Also when I close the lid it doesn´t stop trying it makes noise over and over again.
All my settings are ok I think.
Does anyone have the same problem?

dorofeev wrote:
I don't understand how anything plugged into the same power outlet can have any impact on Mac Pro? This is so weird.
Like most Macs of the past 10 years, you don't turn it on with a mechanical switch. You turn it on with an electronic switch. When the machine is "off," it isn't really off. It's waiting for the proper electrical signal to begin the startup sequence. My theory is that if you happen to have something on the electrical circuit that generates a pulse that resembles the power-on signal that the Mac is expecting, it wakes up.
More commonly, it happens when there is a defective keyboard or mouse cable (causing a short circuit that wakes the Mac, as if a key or mouse button had been pressed), but more rarely it comes in through the electrical system.

Similar Messages

Why does my iPad reset itself all the time?

Why does my iPad reset itself all the time?

Hello!
The same happened to my yesterday night when I was charging my iPhone 5 with iOS 6.1. My first impression was that could it be and auto update (to install iOS 6.1.2) however I'm still on 6.1.
It erased ALL my info and shows the initial configuration wizard......this is totally a mega ***!!!!!!

My iphone 4 contantly has no service and turns off by itself all the time?

my iphone 4 contantly has no service and turns off by itself all the time?

Hi hqhair@aol,
If you are having unusual service and shut off issues with your iPhone, you may find the following articles helpful:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
iPhone: Hardware troubleshooting (under the Power/Battery section)
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Internet connection does not work when Macbook wakes up from sleep

I recently installed MAC OSX LION. After that whenever the macbook pro wakes up from sleep, the internet connection does not work. I get a message 'DNS lookup failed'. I have to Turn off the WIFI and turn it back on every time. Has anyone come across this?

Same problem here. But I am afraid it has nothing to do with Safari because I don't even have Safari open. When it wakes from sleep, it has no internet connection and i cannot get me mail unless I shut wifi off and then back on. This happened back at the start of Snow Leopard too and it was something Apple eventually fixed.

ITunes ask me to restore from a old backup all the time when I connect my iPhone5.

Hi! My iTunes ask me to restore from a backup when I connect my new iPhone 5. I have done the backup process but it still ask me to do it. How do I get iTunes to understand that this is done?
I connected my iPhone and restore it from a backup from my old iPhone 4. It worked well. But when i connect the iPhone to iTunes it ask all the time the same thing.
1. this is a new iPhone bla bla or...
2. restore from a old copy. (strange is that it says that this was done 1982 all the time?!?!).
The MacBook Pro is new and I have the latest iTunes 11.0.1. (12)
Glad for any help!!
Best regards
Pontus

Maybe you should have connected as a new phone instead of trying to put an iPhone 4 backup on an iPhone 5.
Try restoring it to factory setings and start again. If all your music and contact s are on the computer then you should be good to go.

MacBook Pro 2011 get hot and noise all the time and slowly ?

hi. why MacBook Pro get too hot and make a noise all the time i have Yosemite ,mac late 2011 and became very slow?

Games are very CPU/GPU intensive applications and will heat up the MBP. That will result in the fans increasing speed in order to dissipate the heat. This actually is an expected result and for the type of application, is 'normal'.
I you plan to play a lot of games, consider getting a cooling pad twhich will tend to mitigate the heating.
Ciao.

MacBook wakes up from sleep when it shouldn't

Especially MacBook Pro's with bigger screens tend to wake up if they get a little bit of pressure one the screen causing the keys to go down and wake the MacBook/MacBook Pro up. This can drain the battery making the MacBook unavailable for beeing used while traveling.
Is there a way to prevent the MacBook from waking up through the keyboard? It would be helpful to have the MacBook wake up only by pressing the PowerUp-Button.

Apple has a KB article about this. They recommend you not connect or disconnect any external device (USB or FW) while the computer is asleep. It can cause pre-mature wake up even with the lid closed resulting in a lot of heat generation. This would not be desirable if the computer were in a closed area. It can also cause the computer to shutdown or kernel panic.

My Macbook is rebooting itself all the time randomly! - Help!

My Macbook is randomally rebooting itself (seems like it's juicing memory like it was a hot day). although I have 3 things opened (firefox, word, powerpoint) it seems like it's too much for it.
It's a Macbook 13"- Aluminum from late 2008
Processor 2 GHz Intel Core 2 Duo
Memory 8 GB 1333 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software OS X 10.8.4 (12E55)
Any ideas what's causing it and how can I fix things myself if I can???
Interval Since Last Panic Report: 24423 sec
Panics Since Last Report:          2
Anonymous UUID:                    93A2B9DF-15FC-0D51-7799-440BC2AC9810
Wed Aug 28 09:02:16 2013
panic(cpu 1 caller 0xffffff80072b8655): Kernel trap at 0xffffff80072f7c44, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801e5544f0, CR3: 0x00000000204f9000, CR4: 0x0000000000000660
RAX: 0xffffff80194a66d8, RBX: 0xffffff801e5ef3e0, RCX: 0xffffef801e5544d8, RDX: 0x0000000000000000
RSP: 0xffffff80e8ca3d40, RBP: 0xffffff80e8ca3d40, RSI: 0x000000001da74105, RDI: 0xffffff801e5ef3e0
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff801f527142, R11: 0x0000000000000004
R12: 0x0000000000000020, R13: 0xffffff801e5ef430, R14: 0xffffff80192c9b88, R15: 0x0000000000000000
RFL: 0x0000000000010286, RIP: 0xffffff80072f7c44, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef801e5544f0, Error code: 0x0000000000000002, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80e8ca39e0 : 0xffffff800721d626
0xffffff80e8ca3a50 : 0xffffff80072b8655
0xffffff80e8ca3c20 : 0xffffff80072ce17d
0xffffff80e8ca3c40 : 0xffffff80072f7c44
0xffffff80e8ca3d40 : 0xffffff80072f0560
0xffffff80e8ca3d90 : 0xffffff80072ee3f1
0xffffff80e8ca3e00 : 0xffffff800750616b
0xffffff80e8ca3eb0 : 0xffffff80072fa0af
0xffffff80e8ca3ee0 : 0xffffff80072f37a7
0xffffff80e8ca3f40 : 0xffffff80072fa029
0xffffff80e8ca3f60 : 0xffffff80075e13b3
0xffffff80e8ca3fb0 : 0xffffff80072ce6ad
BSD process name corresponding to current thread: cfbackd
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x0000000007000000
Kernel text base: 0xffffff8007200000
System model name: MacBook5,1 (Mac-F42D89A9)
System uptime in nanoseconds: 20103233121960
last loaded kext at 19955553050471: com.sophos.kext.sav    8.0.14 (addr 0xffffff7f89414000, size 24576)
last unloaded kext at 19939332368396: com.sophos.kext.sav    8.0.14 (addr 0xffffff7f8940f000, size 20480)
loaded kexts:
com.sophos.kext.sav    8.0.14
com.pandasecurity.iokit.FileInterceptor    5.9.1
com.avg.netshield.kext    1.1
com.Cycling74.driver.WondershareAudioDevice    1.5.2
at.obdev.nke.LittleSnitch    3876
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.iokit.IOBluetoothSerialManager    4.1.4f2
com.apple.driver.AGPM    100.12.87
com.apple.driver.AppleHDA    2.3.7fc4
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AudioAUUC    1.60
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleMikeyDriver    2.3.7fc4
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleSMCLMU    2.0.3d0
com.apple.filesystems.autofs    3.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.GeForce    8.1.2
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleBacklight    170.2.5
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.driver.SMCMotionSensor    3.0.3d1
com.apple.driver.AppleUSBTCButtons    237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.driver.AppleUSBTCKeyboard    237.1
com.apple.driver.AppleIRController    320.15
com.apple.iokit.SCSITaskUserClient    3.5.5
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.3.1
com.apple.driver.AirPort.Brcm4331    615.20.17
com.apple.driver.AppleAHCIPort    2.5.2
com.apple.nvenet    2.0.19
com.apple.driver.AppleUSBOHCI    5.2.5
com.apple.driver.AppleUSBHub    5.5.5
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleUSBEHCI    5.5.0
com.apple.driver.AppleEFINVRAM    1.7
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.7
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2.1
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.DspFuncLib    2.3.7fc4
com.apple.iokit.IOAudioFamily    1.8.9fc11
com.apple.kext.OSvKernDSPLib    1.6
com.apple.iokit.IOSurface    86.0.4
com.apple.iokit.IOBluetoothFamily    4.1.4f2
com.apple.driver.AppleHDAController    2.3.7fc4
com.apple.iokit.IOHDAFamily    2.3.7fc4
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleSMBusPCI    1.0.11d0
com.apple.driver.IOPlatformPluginFamily    5.3.0d51
com.apple.kext.triggers    1.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.nvidia.nv50hal    8.1.2
com.apple.NVDAResman    8.1.2
com.apple.driver.AppleGraphicsControl    3.4.5
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusController    1.0.11d0
com.apple.iokit.IONDRVSupport    2.3.7
com.apple.iokit.IOGraphicsFamily    2.3.7
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.AppleUSBMultitouch    237.3
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleUSBMergeNub    5.5.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.5
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
com.apple.iokit.IO80211Family    530.4
com.apple.iokit.IOAHCIFamily    2.3.1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBUserClient    5.5.5
com.apple.iokit.IOUSBFamily    5.6.0
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    1.7
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    345
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.7
com.apple.iokit.IOPCIFamily    2.7.3
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 8 GB, SMC 1.40f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0000, 0x000000000000000000000000000000000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9A300, 320.07 GB
Serial ATA Device: OPTIARC DVD RW AD-5960S
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc521, 0x06200000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 4
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2

Yes, Andy is right, I overlooked that: you MUST use absolute correct specs for Apple macbooks, and your 1333MHz is not the right spec. Luckily 2x4GB 1066Mhz is very cheap, change the modules. Use Crucial (they have a configurator) or OWC.

Brand new iPod touch restarts itself all the time

Hello, my dad just came home from Japan, with a brand new iPod touch.
I managed to register it in iTunes, but when i updated the firmware i got an error message. I tried again and i think that i succeed. Then i started to sync music and the rest of the stuff. The syncing stopped after a minute, and when i tried to navigate on my iPod i realised that the touch screen didn't respond. So after several attempts, i made a hard reset.
But now, the iPod touch restarts itself. The Apple logo comes up, and then the screen turns off in a dramatical way, and then the Apple logo comes up again. If i hard reset my device again, the process continous.
I sometimes the iPod shows the "charge battery" screen, and then I can charge the battery. BUT after 5 minutes, the iPod touch starts restarting itself again. :S
Does anyone have a solution to this? Extremely strange.

I suspect you have a hardware problem. Probably a non-functioning battery (over or under) and causing a hardware reset. Bring it to an Apple Store for replacement.
iPhone / Touch / Shuffle (1st gen)

New - Macbook Pro - Running slow, beach ball spinning all the time

I've had my Macbook pro about 3 weeks and the beach ball is constantly spinning and I'm constantly having to force quit programs. Between Mail, Safari, and Aperture. Any ideas?
Robin

ONE POSSIBLE SOLUTION:
I've recently had the beach ball appearing every 30 seconds or so and then the Mac totally freezes.
After trying all the suggestions online, the solution that fixed my problem was to reset the SMU. It basically forces the fan to maximum power and cools your mac down. The problems I had were being caused by an overheating Mac, even though it looked like a system software issue!
The reset the SMU:
Shut your Mac down.
Unplug the power cable from the back of the mac and any other devices (keyboard, etc).
Leave the mac for at least 10 seconds.
Hold down the power button on the back of the mac.
Keep holding down the power button and re-attach the power cable.
Once the power cable is in place, release the power button.
Now press the power button again to start-up your mac. (You can plug your devices back in now).
You should now hear the fan at maximum levels (it's very noisy!).
If you have the same problem that I had, your mac should start to cool and your mac should start operating preperly again (it may take a few minutes).
If this works, you'll then need to download FAN CONTROL FOR MAC.
It's a control panel that better regulates the temperature of your mac than the standard settings.

Automator workflow launches itself all the time - even after being trashed!

I created a while back a automator workflow that I would use to crop images (in order to use them as avatars online). It didn't work so well so I trashed it.
My problem is that now, whenever I save a .pdf file or a .doc file, said workflow will launch itself. Of course, my computer cannot find it (it is long gone). I don't know how I can stop my computer from remembering it. Obviously I haven't trashed it completely. What can I do? It is starting to get really annoying.

I'm not a power user when it comes to Automator, so I might sound a little silly with my explanations. Also, I might not remember it all perfectly.
I'm pretty sure I trashed the .app I created. And by trashing I mean putting it in the trash and emptying the trash. When I discovered it was still launching itself, I used Spotlight to locate another file (I think it was in the library) that sported the same name but with a different extension (not sure what it was, but the icon was a blank page). I trashed it the same way, but it didn't do the trick.
To sum it up I trashed all the files that had the name of that stupid workflow and it is still out there.

Macbook wakes up from sleep mode on its own

Hey,
bought my 13 inch unibody mb last year and it has always been working properly.
However, as soon as I installed Snow Leopard, a strange thing occurs which has already almost killed my mb by overheating...
When I close my mb, it turns to sleep mode but only seconds later, it awakes itself which you can hear from the hd's sound. Then, it realizes it's actually closed and goes to sleep mode again. And this procedure doesn't stop.
I checked the web and some people seem to have the same problem. Reseted the SMC - no change. Took off all cables - doesn't matter. I thought it might be the bluetooth wake up function which is activated in my settings but I can't deselect it because this line is dimmed (why?).
So, I put my SL CD in my MB and reinstalled (don't know whether it was a clean install because all my data is still there...) and nothing has changed..
Can you help me?
Oh, I should add that I installed Parallels Desktop in the last days but even after removal of it, nothing changed...
Thank you for any help!
Ben

Try using SmartSleep. It looks like it will work with 10.6.
http://www.jinx.de/SmartSleep.html
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Mac Pro wakes up from sleep by itself

My MacPro keeps waking up all by itself every day. I turn it off in the morning and when I come back it's always up. I don't wake wake-on-lan enabled, or automatic poweroff/poweron in System Preferences. Does anybody else have this problem?

dorofeev wrote:
I don't understand how anything plugged into the same power outlet can have any impact on Mac Pro? This is so weird.
Like most Macs of the past 10 years, you don't turn it on with a mechanical switch. You turn it on with an electronic switch. When the machine is "off," it isn't really off. It's waiting for the proper electrical signal to begin the startup sequence. My theory is that if you happen to have something on the electrical circuit that generates a pulse that resembles the power-on signal that the Mac is expecting, it wakes up.
More commonly, it happens when there is a defective keyboard or mouse cable (causing a short circuit that wakes the Mac, as if a key or mouse button had been pressed), but more rarely it comes in through the electrical system.

Windows 8.1 laptop wakes up from sleep or hibernate to synchronize time

I put my HP Pavilion g7 notebook in either sleep or hibernate mode but during the night it wakes itself up with the following event:
Log Name:      System
Source:        Microsoft-Windows-Kernel-General
Event ID:      1
Task Category: None
Level:         Information
Keywords:      Time
User:          N/A
Description:
The system time has changed to ‎2015‎-‎03‎-‎02T13:35:06.500000000Z from ‎2015‎-‎03‎-‎02T03:53:18.250703900Z.
Change Reason: System time synchronized with the hardware clock.
Event Xml:
<System>
    <Provider Name="Microsoft-Windows-Kernel-General" Guid="{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}" />
    <EventID>1</EventID>
    <Version>1</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2015-03-02T13:35:06.499591800Z" />
    <EventRecordID>42418</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="4260" />
    <Channel>System</Channel>
    <Security />
</System>
<EventData>
    <Data Name="NewTime">2015-03-02T13:35:06.500000000Z</Data>
    <Data Name="OldTime">2015-03-02T03:53:18.250703900Z</Data>
    <Data Name="Reason">2</Data>
</EventData>
I haven't installed any new software. I don't have the Samsung Magic SSD software mentioned in other posts, and the only devices configured to wake the laptop are the mouse and keyboard, neither of which is touched when the laptop wakes up. Any suggestions
on how this can be delayed until I wake up the laptop would make my wife very happy. I do have a scheduled task to wake the laptop to run the AV software while I'm away, but that's hours after it's actually waking up. Thanks!

try to go to Control Panel\All Control Panel Items\Administrative Tools
Disable and set the trigger as never at task scheduler > time sync
You can also try to clean boot
http://support.microsoft.com/kb/929135/en-us

Macbook Pro getting slower and slower, freezing all the time

Hi,
My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
Hardware Information:
          MacBook Pro (13-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.3 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
          FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
System Software:
          OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
Disk Information:
          TOSHIBA MK5059GSXP disk0 : (500,11 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          JMicron USB to ATA/ATAPI bridge 500,11 GB
                    EFI (disk2s1) <not mounted>: 209,7 MB
                    Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. iPhone
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
          com.Cycling74.driver.Soundflower          (1.5.1)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [failed] com.brother.LOGINserver.plist
          [loaded] com.oracle.java.Java-Updater.plist
          [loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
          [failed] com.akamai.single-user-client.plist
          [loaded] com.facebook.videochat.[redacted].plist
          [failed] com.google.GoogleContactSyncAgent.plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.spotify.webhelper.plist
          [loaded] com.valvesoftware.steamclean.plist
User Login Items:
          uHD-Agent
          GrowlHelperApp
          Alfred
          uTorrent
          Dropbox
          iShutdown
          HyperDock Helper
          Assistente de gestor de conteúdo
3rd Party Preference Panes:
          Akamai NetSession Preferences
          Fan Control
          Flash Player
          Flip4Mac WMV
          Growl
          HyperDock
          Java
Internet Plug-ins::
          DirectorShockwave: Version: 11.5.9r620
          o1dbrowserplugin: Version: 4.9.1.16010
          Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.8.1
          RealPlayer Plugin: Version: Unknown
          Silverlight: Version: 5.1.20913.0 - SDK 10.6
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 4.9.1.16010
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          JavaAppletPlugin: Version: Java 7 Update 45
Bad Fonts:
          None
Old applications:
          Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                    /Users/duarte_cunharosa/Applications/CMA.app
          Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                    /Applications/CMA.app
          FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5
                    /Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
          Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
          Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
          Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
          Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
          Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Document Connection.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Excel.app
          Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
          Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Outlook.app
          Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
          Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
          Microsoft Word:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Word.app
          Miro Video Converter:          Version: 2.6 - SDK 10.0
                    /Applications/Miro Video Converter.app
          My Day:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/My Day.app
          Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
          Plants vs:          Version: 1.0.40 - SDK 10.5
                    /Applications/Plants vs. Zombies.app
          RipIt:          Version: 1.6.2 - SDK 10.5
                    /Applications/RipIt.app
          SLLauncher:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Solver:          Version: 1.0 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
          UPlayBrowser:          Version: 1.0.1.23853 - SDK 10.5
                    /Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
          Destinations:
                    Time Machine [Local] (Last used)
                    Total size: 698.32 GB
                    Total number of backups: 3
                    Oldest backup: 2013-12-20 18:10:54 +0000
                    Last backup: 2013-12-22 19:52:17 +0000
                    Size of backup disk: Too small
                              Backup size 698.32 GB < (Disk used 414.09 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          Transmission
               4%          Dropbox
               2%          WindowServer
               2%          Dock
               1%          Google Chrome
Top Processes by Memory:
          123 MB          Google Chrome
          119 MB          iTunes
          102 MB          Dropbox
          87 MB          Google Chrome Helper
          66 MB          Finder
Virtual Memory Statistics:
          148 MB          Free RAM
          995 MB          Active RAM
          859 MB          Inactive RAM
          1.03 GB          Wired RAM
          7.80 GB          Page-ins
          4.84 GB          Page-outs

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply.

My macbook wakes up from sleep by itself all the time.

Similar Messages

Maybe you are looking for