My macbook was runnig slow so i turned it off using the power button i then tryed to turn it back on and it turns on stays at the load screen with the apple with the loading sign spinning and a bar under that then my mac (late 08) turns off help please

Help please

Reinstall OS X using one of the following. The first is for Snow Leopard and the later for Lion/Mountain Lion.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

I accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?

i accidentally pushed the power button of my macbookpro... it restarted but doesnt open... what appears now is a flashing FOLDER logo with a QUESTION MARK on it.. can someboby help me to fix this?

(Assuming you don't have a firmware boot lock set)
First easy step...
1. Shut down the computer if it's on (hold the power button down... until it shuts off)
2. Press the power button
3. Immediately press AND hold the Option key ASAP
Hold until drive option images appear in a single row across the screen. Typically most people running 10.7 or 10.8 will see 2 drive options to boot from: the main volume they usually boot from, and a recovery volume. If your main volume pops up. Use the cursor or arrow keys to highlight/select the main volume and press enter. That should boot your main volume. Let me know what you get from this point... I'll give you more as you go along.

Macbook Pro is slow, freezes constantly and I'm forced to hold down the power button to turn it off.

Hey all,
This is my first post/discussion so hopefully I'm posting in the right section and all. Anyway, as of recently (few days) my Macbook Pro 15" (model previous to the one just released) has been been slow + lagging, also when this happens my computer freezes, but its kind of different: I can still move the cursor around and stuff, but for instance, if its google chrome that freezes I won't be able to close it, (tried force quit), after this, my whole computer kinda freezes and I can't close any of my programs, I can't click on the menu's at the top to shut down or doing anything really, eg. change internet connections. Closing my macbook, like shutting the lid doesn't solve anything, only turning it off by holding the power button for a few seconds, which I'm almost certain isn't a good thing. I've had to do this like 3 times today and its getting pretty frustrating.
Something tells me that it might be because of memory usage, but I'm not entirely sure, I only say this because when looking at the available/free memory using iStat sometimes, its really low, like 12mb, 30mb, etc.
Anyway, I know that's quite a lot of infomration but hopefully its useful, if there's any additional information you require that may be of help to you, please tell me and I'll do my best to provide it.
Thanks,
Roshen.

Roshen,
There are a couple of things you can try, but it sounds to me as if it's a problem with your hard drive.
First, open Activity Monitor in your Utilities folder and see how much of your CPU % is being used by any one application (you can sort by %). If any one application/process is taking up more than 15% or so of your CPU, try killing (quitting) the process.
Second, since yours is a 2011 model, it will have come with Lion installed. Shut down your machine and boot up while holding down the Command and R keys. Open Disk Utility and verify your disk. If it comes up with errors, click repair.
If neither of these work, take your MBP into your local Apple Store. You should still be under warranty, even if you didn't purchase AppleCare. All beforehand and make an appointment.
Good luck,
Clinton

Charger led turns green as I press power button, won't turn off

My MBP is turned off. When I plug it in, it's charging and the led is orange. The battery indicator LEDs work as well.
When I press the power button to turn it on, nothing happens, except the led on the charger turning green until i stop pressing the power button.
I tried an SMC reset, didn't solve anything.
What could it be?

Run an Apple hardware test. Perhaps that might offer a clue:
http://support.apple.com/en-us/HT201257
Ciao.

My macbook shows a only white screen with apple logo and spinning wheel when i on the power button? How can i correct that?

Any help!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something

My Mac won't fully start up.. I push the power button, the apple sign pops up and the loading circle and then a bar loading and as soon as the bar is done loading the computer cuts off again. It's like it attempts to start up like it's updating something and then after the bar is full, it shuts off. Please help

Hpullen wrote:
A1278 and I'm not sure about the OSX
http://support.apple.com/kb/HT4132 How to identify MacBook Pro models
http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers

I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status:

My macbook pro frooze, "spinning wheel of death", I tried to force quit. When that failed I held down the power button. Now I can't get by the white apple start up screen, the wheel just keeps spinning and nothing will happen...HELP!

Again,
My macbook pro just frooze while on-line. I got the rainbow wheel spinnin and it wouldn't stop I tried to do a force quit and I was unable to do that. So I held down the power button. Now when I try to restart it I can't get by the while page with the apple symbol on it. All I have is the grey circle spinning continuosly like it is working. I tried a command S when I started it back up and checked the HD and rebooted, still can't get by the startup page. Any suggestions?

I'm having the same problem. I started an automatic upgrade that then got "stuck" for hours. I did a hard shut down and now all I get when I try to reboot is the spinning wheel. I haven't done a backup in 3 months and can't afford to lose everything in a reinstall. Any suggestions?

My mac pro crashed. Apple genius people said to reinstall snow leopard. I did and it failed to start after i installed. I started with the power button, tried to install upgrades, and now I get only a grey screen with spining wheel.

How can I restart a mac pro that shows only a grey screen with a spinning wheel. I reinstalled snow leopard (10.6.3) over 10.6.8 because apple genious people said I had problems with my library files after a time capsule crash. I reinstalled but when done I got only a blue screen. I restarted with the power button and tried to insall 10.6 combined upgrades. I got an error message that it could not install because of an error. When I powered down and tried to restart, I get only a grey screen. My optical drive does not open so I can't restart from another source.

Restart, holding down the mouse button. That should eject the disc. Zap the PRAM and Reset the SMC. Then, pop in the install disc, restart with it in again, select your language, and, when the menu bar pops up, select Disk Utility from the Utilities menu. select the boot volume and repair the disk.

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I watched a video on my iphone, and it worked fine. I wanted to watch it on our MacBook for sound and clarity, and every time I accessed it, it locked up. To the point that the only solution was holding down the power button. Everything else worked, and

I watched a video on my iphone, and it worked fine.
I wanted to watch it on our MacBook for sound and clarity, and every time I accessed it, it locked up. To the point that the only solution was holding down the power button.
Everything else worked, and I could freely enter information and open other Facebook entries, but when hitting the "play" button or clicking on the video it immediately bought up the spinning beach ball, and would never clear. Any solutions?

Did you try viewing the video in a different browser? Firefox or Chrome maybe?

Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.

Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.
I used to install the rEFIt to boot with win7. When I deleted win7, I didn't uninstall rEFIt. Nothing wrong with it. One day after I watched movie in full screen,I pressed esc to quit. Then I found the touchpad didn't work. I can't turn off air. I just pressed power button for a little while. It rebooted, then my nightmare just began...
I have tried everything, PRAM, command+R, literally everything. No change.
But when I plug a CD-ROM with USB, I can only here one BONG, just once, then white screen, Like waiting for something...
I took it to a service center in China, they told me the CPU had broken. SInce it's one month out of warranty, they wanted to charge me for like $250....
I really don't think that's CPU's problem. I checked the history, it seems like somebody else also had the problem before.
Can anyone give me some hints??? Thanks!!!!!! Or I have to take it back to America to check....

Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac

HT201263 Okay so i was updating someone picture in my contacts it kept loading for a long time so i held the home button and the power button it slowly went black like it faded out and went black i tried everything i dont even know what wrong pleaase help

Okay so i was updating someone picture in my contacts it kept loading for a long time so i held the home button and the power button it slowly went black like it faded out and went black i tried everything i dont even know what wrong i been had a crack on my phone and like i can see thats its light so like what do i do cause i tried plugging it into the computer and stuff and the computer dosent even bring up the logo which means the computer dosent reconize that my iphone is plugged in i had this problem before except it went white pleaase help

Hi supreme_babes,
If the display on your iPhone is black or isn't responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

My macbook was runnig slow so i turned it off using the power button i then tryed to turn it back on and it turns on stays at the load screen with the apple with the loading sign spinning and a bar under that then my mac (late 08) turns off help please

Similar Messages

Maybe you are looking for