My MacBook will no longer connect to my wireless printer.

My MacBook (circa 2010 - it's not a MacBook Pro) stopped connecting wirelessly to my HP printer (3050 J610). I get a message, "Printer is offline." The printer is on and I have no trouble printing from my iMac. I appreciate any advice/insights. Thank you.

Welcome to Apple Support Communities. We're all users here.
There is a 'Reset Printing System' command:
, System Preferences, Hardware, Print & Fax, right-click (Command-click) on the printer in question in the left column, as illustrated below, and select Reset Printing System.
WARNING NOTE: This WILL delete all printers AND print cues AND saved settings, if you have saved your own 'custom settings' for the printer, and named them, such as 'Staples Glossy Photo-rear feed', those WILL disappear.
Then you then will need to reinstall all printers, and re-create any custom settings, so if you have a lot of custom settings saved, make screen captures (+shift+3) for the things you customized BEFORE you reset.
Yes, this is drastic, but if nothing else works, AND THE PROBLEM IS NOT CAUSED BY A PRINTER MALFUNCTION, this has always worked for me to cure my wireless print problems such as you describe.
Message was edited by: kostby

Similar Messages

My MacBook pro will no longer connect to a wireless network that I've been connecting to automatically for months and I'm not given the opportunity to re-enter the password.

I am trying to connect to a wireless network that I have connect to automatically for over a year. When I try to connect I simply get the following message: "the wifi network xxxx could not be joined". I have moved closer to the router as suggested and I have attempted to run diagnostics without luck, I have rebooted, I have toggled the wifi on and off. I'm at a loss now...
My MacBook Pro system is running OSX 10.9.5, 2.9 GHz Intel Core 17 processor, 8GB 16000MHz DDR3 memory.

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try another cable

My iPad will no longer connect to my Sony wireless speaker after downloading the latest IOS software. It worked perfectly before. I have reset and reinstalled the speaker through NS setup but still no joy. Any advice would be most welcome.

My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.

Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP.

TS1398 ipod will no longer connect to wireless

My ipod will no longer connect you ATT wireless. It did before and my iPhone and iPad still connect jut fine. Any ideas why?

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iPhone 5 will no longer connect via bluetooth to Fitbit Flex or wireless headset

My iPhone 5 will no longer connect via bluetooth to my Fitbit Flex aftering updating to ios 7. Apple phone support had me completely erase and set my phone up again as new to restart bluetooth pairing, then restore again through iCloud. Worked last night but same problem today. It also will no longer connect to my wireless headset in my car. Of course I'm now 5 days over my 1 year warranty as well. Any ideas?

Delete the pairing from both devices then pair them again.

Can no longer connect to encripted wireless.

Hello,
I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP. There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.
Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
I look forward to any help.
Thanks,
Martin

First of all, re-download and re-install the latest firmware for your router. After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast. Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router. I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
As a test, turn off all your 2.4 GHz devices and unplug them from the wall. This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc. Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band. See if this makes a difference.
Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption. Please explain. Are you saying that the Windows software was doing the WPA for you?
Update you computers with the latest drivers for your wireless adapters.
As infinityx mentioned, update Windows XP to at least SP2.
It sounds like you may have the Intel Pro Wireless 2200bg card. If so, this card is known to have connection problems. The problems with this card worsened with a recent Windows update, but were fixed with the latest driver. Go to the Intel web site and download and install the latest drivers.
Also, you can try another channel on your router. Since you have a neighbor on 11, try any channel 1 thru 6. (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
Message Edited by toomanydonuts on 03-16-200704:01 AM

My Macbook Pro will no longer connect to my tv via HDMI

Well basically it is in the title, my Macbook Pro will no longer connect to my tv via HDMI.
I have been using this cable for a long time and works perfectly.
earlier today i used it to connect my mac up to my parents 4k tv, it worked fine, did what i wanted to do.
but now when I've come to connect it up to my tv it recognises there is something connected but it won't display anything
it just says no signal on my tv
im not sure whether my mac has changed some settings on its own to run on 4k but now to high to run on my 1080p tv
pretty annoying so any ideas id be very grateful.
I've already tried
restarting my mac
turning tv on and off
different hdmi ports
thank you

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try another cable

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

HT4623 my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

the computer is a macbook pro, mac os x 10.6.08 and the ipod touch is ios 6.0.
the problem is that just updated the itunes on the computer and now the ipod won't connect because apparently the itunes on the ipod is not up to date but the iod is telling me that is is up to date, so i can't do a software update.

My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

My external hard drive will no longer connect to my macpro......any ideas on how to solve this problem??

My external hard drive will no longer connect to my macbook pro via FW800........Any ideas on how to solve this??

Reset the SMC, see this Apple note: http://support.apple.com/kb/HT3964
Also reset the PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
In most cases, those two actions will fix the port issue. If it's still an issue, you may need to see if the external hard drive can connect to another system, to ensure it's not having problems.

Time Machine will no Longer connect to network drive.. Although the drive is visible and accessible by the system.

Time Machine was working fine, until one day back up was failing due to being unable to delete the old backup. now it will no longer connect to the network drive although the external drive is accessible through the system.. any ideas?

Time Machine is completely unrlable on any networked drive unless that drive is connected to one of the new Airport Extremes. I'm not surprised that you're encountering problems with it if you're using a networked drive. Can you plug the drive into your MacBook Pro and see if it will backup? The backups may - probably are - corrupt.
Clinton

I recently installed the 5.5.3 AirPort Utility update and my airport will no longer connect to the internet.

I recently updated my macbook's AirPort Utility to 5.5.3 and it will no longer connect to wireless networks. First let me explain everything I have done already, I have reset my router, and tried on other's (my friends and my schools) networks. I have been able to succesfully connect to my friends wireless (router is made by netgear), but when i try to connect to my network (WRT54G linksys router) and my schools network (im unaware what they use for routers) I am unable to connect, and my AirPort will proceed either state it does not have an IP address and will assign itself one and will not connect to the internet. It will connect to the network with an IP, but will be unable to connect to the internet with the browser claiming DNS lookup failure.
yes, I have deleted and changed my location,
       deleted the selected service.
       tried resetting my router
       cleared my PRAM / NVRAM
       installed the newest firmware onto my WRT54G
       Renewed my DHCP lease
       made sure my Configure IPv4 is using DHCP
      and theres a few more but i'm forgetting them.
Any suggestions on why the 5.5.3 update might of screwed up my airport?

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

My Mac will no longer connect to my home Internet.

This is frustrating.
My MacBook pro laptop, purchased in September, will no longer connect to my home Internet through wi-fi. It was working fine this morning, but now when I attempt to connect, it asks me for my password. I type in the correct password, hit enter, and it does it's business for thirteen seconds before saying connection failed. It was working literally eight hours ago. My brothers much older MacBook is connecting, my iPhone had connected... I cannot figure out this problem. Does anyone have a solution or a method for me to fix it?

Open network preferences, forget the network, then try to re connect with it! Otherwise, try turning off the modem, waiting 10seconds and truning back on. This may just help to clear the cache.

IPod Will no Longer Connect to iTunes 10.22.. Help!

Hello everyone! Today I decided to update my itunes to the latest version ( 10.22). BEfore I updated, I made sure to sync my ipod. Everything worked fine. Ipod connected, it sync, and etc... But after I updated to 10.22, my iPod will no longer connect. My Windows xP reads the iPod, but not iTunes. What should I do, becuase I need to sync my new settings to my iPod!
Thanks for any help in advanced.
Ant1235

Bump. I still need help.

My MacBook will no longer connect to my wireless printer.

Similar Messages

Maybe you are looking for