My MacBook Will Power up but stays at the loading screen.

My MacBook will start up but stay at the loading screen with the apple logo for ever and wont go to the log in screen? why is this happening

why is this happening?
The disk may need repairing.
Use Lion Recovery

Similar Messages

HT4528 my iphone 4 shut off and wont turn back on so i had to go to restore it and it wont reload or anything just stays on the loading screen and does nothing?

my iphone 4 shut off and wont turn back on so i had to go to restore it and it wont reload or anything just stays on the loading screen and does nothing?

Hi marissacav,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
- Judy

Why does my ipod stay on the loading screen ipod 4g

my ipod touch is a 4G and it stays on the loading screen. It's bin a day that it is doing that and its wierd do you have any tips to help me wiht this bug please help me please or can you do some thing
if you responde please reponde to [email protected]

Try here:
iOS: Not responding or does not turn on

Why does my macbook air only stay on the loading screen?

When i turn on my macbook air it only shows the loading screen. How can I fix it?

See this Apple note.

My macbook was runnig slow so i turned it off using the power button i then tryed to turn it back on and it turns on stays at the load screen with the apple with the loading sign spinning and a bar under that then my mac (late 08) turns off help please

Help please

Reinstall OS X using one of the following. The first is for Snow Leopard and the later for Lion/Mountain Lion.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Vado gen 1 will power on but none of the control buttons work

Hello, I am having an issue with my vado, had it for a couple years, but now none of the buttons that control the unit work or respond. To get it to turn on I have to take out the battery and it powers up but that is it. Any ideas or is it time to move on to a new one? Hate to loose it but it is a couple years old. Thanks.

Hi,
Please try updating the firmware to see if it hel
ps.

My mac stays on the loading screen and when I boot into safe mode it loads the background but no icons

My mac was working fine the other day and I started it up today and it loaded to a blue screen so I restarted it and went to safe mode and it loaded up with the background and mouse but no icons. Could I please have any help thanks.

Just to confirm, your iMac is a "G5" (not Intel), and THIS is the procedure you used to reset the SMU
http://support.apple.com/kb/HT1767
and not the procedure for Intel iMacs.
If you have the iMac connected to an old (or overcrowded) power strip, try connecting it directly to a wall outlet by itself. Make sure no other cables (other than the power cord) are connected.

HT3964 my mac comes on but stays at the white screen with the apple on it, what should i do?

white screen with apple loading?

restart the computer and hold the left shift key until the apple logo appears. This will (attempt) to start the computer in Safe Mode. Safe Mode performs a disk directory check and repairs the drive if necessary, starts the computer with a reduced set of drivers (so some things may not work, such as your printer), and deletes the temporary caches. Since part of what Safe Mode does is repair work, you can attempt to restart the computer normally if it successfully boots with Safe Mode.
If this doesn't work, let us know.

My ipod keeps staying at the loading screen.

When i turn on my ipod it sstays on the screen of the apple sign, some times when the batttery life is dried it turns off, if i turn it back on it jsut stays on that screen again, what can i do to fix this?

Go to this page: http://www.ifans.com/forums/threads/how-to-force-ipod-ipad-or-iphone-into-restor e-mode.2790/

I erased my ipod and it has stayed on the loading screen. Why?

please help

You'll want to connect your iPod Touch to your iTunes library in recovery mode and restore it using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

I thought i lost my iPhone so i went on iCloud and erased it, so now after it erased it went to shut down and is staying on the loading screen like its trying to shut off

its frozen on the loading screen to turn off

Hey there tblemings,
It sounds like your iPhone seems to be stuck on the Apple logo screen. I would try resetting the device with this process:
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If resetting doesnt work, then I would try putting the phone in recovery mode with this article and restore it with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Take care,
Sterling

MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv

MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?

Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Macbook pro will power up but cant log on any user. Buttons on keynoard work but nothing responds to curser.

Macbook pro will power up but cant log on any user. Buttons on keyboard work and light up etc. but nothing responds to curser. Have powered off manually and tried with powercord attached but still same problem.

Have you reset the SMC?
http://support.apple.com/kb/ht3964

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!

I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!

Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
Good luck & happy computing!

My MacBook Will Power up but stays at the loading screen.

Similar Messages

Maybe you are looking for