My macbook won't go past the loading stage when I start it up.

When I turn on my Macbook normally it won't go past the white screen with the grey apple and spinning gear symbol. When I start it up in Safe Mode the progress bar reaches 60% then vanishes. When I start it up in Verbose Mode it says:
Cannot get audit control port
Warning: audit space low (< 5% free)on audit log file-system
and
systemShutdown false
normal code
normal code
Previous Shutdown Cause: 3
Before it stopped loading I had less than 5GB of memory spare if that helps.

A common thumb rule says, that you should have at least 10% of the total disk capacity as free space for swapping files and system usage. As this is a number for smaller drives, on actual big drives the percentage can be smaller, but depending on your actual RAM size the system may use the disk for swapping and need a few GB space.
Warning: audit space low (< 5% free)on audit log file-system
In your case, it's a low-level system error connected to some log operation. It may be that an existing log file is too large or has become corrupted such that the OS cannot add to the log.
First Aid
Try to boot in single mode and clean the logs or shoot off the Audit mode with CLI command "sudo audit -t" (without the braces)
If that does not solve the problem start (if possible) the system as a target from a nother Mac (target mode) and perform a logfile cleanup with a apropriate tool; e.g. TinkerTool.
Lupunus

Similar Messages

My macbook won't get past the loading screen..

i dont know what went wrong but i was going to empty out my trash folder and when i clicked to have it emptied, that little screen that pops up notifying you of its progress said there was nothing to be emptied so when i tried to exit it wouldnt let me. it stood like that for awhile but would not let me quit. so i force quit but that didnt work so i hit the reboot option and then all my desktop icons were gone with only my desktop showing. it remained like that for awhile. so i pressed the power button to shut it off. now when i try to turn it on the loading page opens but thats as far as my computer goes. i also have a disk inside that i cant eject.
i obviously don't know what to do and school starts in a little over a week so some tips would be GREATLY appreciated.
thanks :T

If you can find another Mac, restart your MacBook and hold the "T" key. This will in effect, turn your Mac into an external firewire hard drive. Hook it up to another Mac via a firewire cable, and using the other Mac, do a permissions repair of your Mac with the disc utility.
Or, run Disc Warrior from the other Mac, to repair the directory on yours.

My iMac starts, but won't get past the loading screen?

My iMac starts up, but won't even get past the white screen with the Apple logo.
It kept giving me black screens, and would not start in safety mode. After command + option + p + r, the black screens stopped coming, but it still won't get past the loading screen, if I let it load long enough the Apple logo is replaced by a "denied" symbol but that is the only thing that happens. By hitting command + d, I was told nothing is wrong. When pressing command + r and going to disk utility, it found an issue while verifying and repairing. At first it stated "invalid journal" but now it only says to reinstall everything and that the problem couldn't be solved. I cannot mount the harddrive, and Time Machine just searches for copies without getting anywhere. When I try installing OS X (Mavericks) again, the harddrive doesn't even show up. What do I do?

The HD sounds like it has crashed, take it into your local Apple Store or Apple Authorized Service Provider (AASP), if you bought AppleCare this will be covered. If you don't have an Apple Store in your area and don't know of any AASPs then please click https://locate.apple.com/country to begin finding one.

My MacBook won't boot past the grey screen.. help!

Today I was having a problem with Safari. For some reason, it kept restarting. This annoyed me, so I restarted my MacBook. Unfortunately, it won't boot past the grey screen, with the thing spinning in the middle. I've been into disk utility and it says my HDD is fine. I restarted from this, and yet it still won't boot. Can anyone suggest what's wrong/what to do?
Thanks in advance

Retrieving data using Target Disk Mode:
1) Shut down both computers
2) Connect the two computers using a Firewire cable
3) Start up the working computer.
4) Once the working computer is ready, startup your MacBook with the T key held down.
5) Your MacBook's hard drive should appear as an external hard drive on the working Mac. Drag & drop any files you want to save.
~Lyssa

My Macbook won't get past the start up screen

Hey everyone
I have a Macbook that's about 3 years old. I did an software update yesterday and since doing it the computer won't get past the start up screen. There's just the Apple logo and the rolling ball thing. It's been stuck there for around 30mins and nothing changes. I'm not really sure what has happened but I was wondering if there is any way I can fix it.
Thanks for your time.
Bevan

Hey Lyssa
I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
If I can start it in safe mode what should I do?
Thanks.
Bevan

Curve 8900 won't get past the T-Mobile screen on start-up

I am hoping that someone out there can help. My T-Mobile BlackBerry Curve 8900 does not make it past the T-Mobile screen on start-up. The battery was fully charged when this happened. Personally, I think it has to do with iHeart Radio crashing, but I could be wrong. I have tried to plug the USB cord into a rear port on my laptop and launch the Blackberry Desktop Manager to see if I could do anything, but nothing happens. The BB Desktop Manager does not connect to the phone, because it is not getting past the T-Mobile screen on start-up. Not sure what to try.

Hey VTX1300R,
Do you have a recent backup of you device? If so the you may want to try to do a reset to factory on the device. Have a look at this article to see how to do it. http://bit.ly/98bCNO
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Macbook won't get past the grey start up screen

I purchased my Macbook in 2008, roughly July.
My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues.
After my fiance stopped the start up, the macbook won't turn on. It'll load up to the grey loading screen (example here)... It doesn't make much noise as it starts up either. I have all original discs that came with the macbook, if that helps any.
I'm frustrated, as I can't afford to replace my mac at this point.
Any idea what I can do?
Thanks..

Hopefully, nothing permanent. Do the following:
If you have Snow Leopard installed:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you have Lion installed:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
If you have Leopard installed:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My MacBook won't boot past the grey screen showing a folder sign with question mark, My MacBook won't boot past the grey screen showing a folder sign with question mark, My MacBook won't boot past the grey screen showing a folder sign with question mark

Hi, I need some serious help immediately. I have been using an external hard disc to watch movies and stuff on my MacBook. However last night I removed the external hard disc accidentally without closing the programs that were still using the data from the hard disk and hence the complete MacBook got hanged and nothing responded. I tried using command Q to shut down the program buy it didn't help either. So finally I gave up and shut down the MacBook manually by pressing the power on/off button.
However when I tried restarting my MacBook I faced a serious problem. The start up won't boot beyond the grey screen showing a folder sign with a question mark sign in it .. I just don't know what to do. Somebody please help me and guide me through this problem
Awaiting quick response
Gratitude in advance
Regards
AJ

If you try booting your Mac holding down the Option key, you should see the icon for Macintosh HD. Try selecting that to boot. If you can get in that way, go to System Preferences > Startup Disk and select your Mac HD, then click Restart.
If you can't see the Mac HD, the volume may indeed need repair as Niel said.

MacBook won't boot past the apple logo screen!

So my MacBook started freezing up and I went to restart it and it wouldn't boot past the grey logo screen with the spinning gear. Its pretty old and therefor still has the Leopard operating system. I've been trying to run Disk Repair using a Snow Leopard install disc but it just gets about 30% done and then doesn't go any further. Eventually I stopped the disk repair and just tried installing OSX but when it asks me what drive I want to install on there are no options available to click. I've got alot of unsaved work on this old thing and would love to get it running soon! Any help would be extremely appreciated! Thanks

I've been trying to run Disk Repair using a Snow Leopard install disc
Install discs are "machine specific" .. you can only use the install disc that came with the Mac for repairing the hard disk.
You may not have enough free space on the startup disk.
Follow the directions for starting up in Safe Mode
A Safe Mode boot can take a little longer then a normal boot so be patient.
When you see the Desktop, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
If there isn't enough free space, help here > Freeing space on your Mac OS X startup disk
You can use Disk Utility to verify the startup disk from Safe Mode but you can't repair the disk. You will need the install disc that came with your MacBook for that. While you have Disk Utillity open check S.M.A.R.T. status at the bottom of the window. Make sure it says: Verified
When you are finished, click the Apple menu icon top left in the screen. From the drop down menu click Restart.
If you don't have the original install discs you may be able to request a replacement. You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

IMac won't get past the Apple page when turned on...

I just bought a new iMac about a month ago. It is the 21.5" basic system. Of course the first thing that I did with it was update the software and have set it to update automatically, so everything should be golden there... Today when I walked by and turned it on it came on like normal, but that was it. The white screen with the Apple in the middle came on and then the loading icon popped up underneath it. It has been loading since... After about an hour and a half, I shut it off by holding the power button in, unplugged the modem, unplugged the iMac then plugged only the iMac back up. Turned on the power again. It powered up but did the same thing. Is something loading, updates maybe? If so it is something different than any of the other updates it has uploaded so far. THis is a new one on me.
I might add that this is my first Mac. I went with it because I get tired of rebooting my PC each year (I actually just did my PC again...bummer). Now if the iMac has already crashed, I am severely dissapointed in Mac. I have not downloaded anything that I shouldn't have, or anything that was even suspicious. In fact the only real things I have downloaded are Firefox and some of the add ons and a trial version of PS.
Can anyone help me, tell me it is normal and it will be ok?

It sounds like the update may have bee interrupted somehow and became corrupted, possible a power spike at your house. However I wouldn't get too upset. You have 90 days of free telephone support so now is a good time to use it. The number is in your owners manual.
You can also try doing a SMC and PRAM resets, this is probably what Apple will have you do to begin with so you can be pro-active and try them and if they don't fix the problem you can just let the tech know. The instructions for doing each reset are:
_SMC RESET_
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
_PRAM RESET_
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.
Also this is a good time to plug AppleCare. AppleCare will extend your warranty and phone support to 3 years from the date of purchase. If you don't already have it I'd recommend it, Apple charges $169 however you can pick it up from Amazon for less. You can only get it while the machine is covered by it's one year warranty. Let it go 366 days and you're out of luck.
Roger

Facetime won't go past the verifying stage, yet I've verified the email?

Hi Guys,
I'm new to this!
I'm trying to connect to Facetime, however I have verified the email that was sent!
I am able to type in my password and get to the stage when it verifys it, however it then goes back to the previous screen and i have to type in my password again?!
Any ideas will be muchly apprieciated of what to do!

A common thumb rule says, that you should have at least 10% of the total disk capacity as free space for swapping files and system usage. As this is a number for smaller drives, on actual big drives the percentage can be smaller, but depending on your actual RAM size the system may use the disk for swapping and need a few GB space.
Warning: audit space low (< 5% free)on audit log file-system
In your case, it's a low-level system error connected to some log operation. It may be that an existing log file is too large or has become corrupted such that the OS cannot add to the log.
First Aid
Try to boot in single mode and clean the logs or shoot off the Audit mode with CLI command "sudo audit -t" (without the braces)
If that does not solve the problem start (if possible) the system as a target from a nother Mac (target mode) and perform a logfile cleanup with a apropriate tool; e.g. TinkerTool.
Lupunus

My iMac won't get past the loading screen, it has a little loading bar which won't move

I had the finder and Safari windows open. Safari was on youtube then it froze so I shut it down. It turned back on once to get to the login screen but then froze once again. Know it only turns on the apple loading screen with a little loading bar which won't move.

Please carefully read and methodically follow the instructions in http://support.apple.com/kb/ts2570.
Good luck.

My MacBook won't go past the gray startup screen.

I shut down my MacBook pro during a software update because the update appeared to have frozen. When I tried to reboot my computer afterwards, it would go to the gray startup screen with the spinning gear and not progress any further. I have tried multiple times to restart it, each time getting the same result, I have also tried starting it up holding down shift, another time holding down control option p r, and also holding shift. Each time gave me the same result of freezing at the gray screen. Any idea on what I can do to resolve this problem?

Hi,
This article may help. What happened was a kernel panic. They can be caused by either hardware or software. Try the syeps outlined in the article and post back the results.
John

I installed Lion but now my Macbook won't go past the start-up screen. Help!

I installed Mac OS X Lion today and it downloaded and installed fine but when it restarted it went to the white start up screen with the grey apple logo and the wheel kept going around for two hours. I held the power button and my macbook went off so I pushed it again and it went on, again staying at the start up screen for half an hour. I restarted it again and held the option button to boot to recovery. I then repaired the permissions and the disk drive and then reinstalled Mac OS X Lion. This time the installation took around 4 hours to complete and then restarted. It again went to the white start up screen and the grey wheel has now been going around for the last hour! What can I do? I haven't backed up my files and would still like to keep them. Thanks.

Hey Lyssa
I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
If I can start it in safe mode what should I do?
Thanks.
Bevan

MacBook won't go past the boot-up screen?

Okay, so I had about 3,008 of other peoples' pictures on my MacBook that I didn't want. I sent them all to the Trash in iPhoto to get rid of them. I then two-finger clicked on the Trash in iPhoto and told it to empty trash. It asked me if I was sure I wanted to delete all 3,008 photos and I clicked yes. (in retrospect, I should have clicked no.) After the program had sat doing nothing except turning my mouse pointer into a spinning rainbow-wheel for about 15 minutes, I decided something must be wrong. I two-finger clicked the iPhoto application in my dock to try and tell it to Force Quit, but it just froze. the application didn't even shrink back to normal when I pulled the mouse pointer away from it. My friend said to just turn it off and try turning it back on, and held the power button down so the computer shut off. I waited a few minutes, tried to turn it back on, and all I got was the boot up screen (white with the gray apple logo and a spinning wheel thing underneath it) for about five minutes and then it shut itself off. It has been doing this every time I've tried to turn it on since yesterday afternoon. PLEASE help me!!

I should also mention that I kind of just guessed on which operating system I'm running... I don't know, and I assume it's whatever they originally put on the MacBooks in 2008.

My macbook won't go past the loading stage when I start it up.

Similar Messages

Maybe you are looking for