My macbook won't start up. ive got 3 mac and i had problem with all of them, my faith in mac is running out unfurtunally

when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again, ive got all my recordings in there , it a nightmare, ive got a mac mini repaired 3 month ago and cost me 349 pound from mac, ive got a mac book g4 my first one who i paid for repair long time ago, and now this one is broken too, unfortunately im not rich to keep paying for repair every so often because my Macs are failing, in really disappointed with apple,
and please guy let me know if someone can help me with this issue, thaks a lot serge

when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again / ive got all my recordings in there
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
in really disappointed with apple,
Serge... you are aware that you are responsible for backing up your importanta data correct ?

Similar Messages

Ive got CS6 and it has issues with ariel font

since getting CS6 ive had issue with typing words. i found out PHS dosent like the ariel font so removed this from my libarys. font book and PHS. did the crash report and everything the blogs said to do to remove a font but my layouts keep jumping when i type, the type weither its times, apple chancey etc changes to symbols and ^:" . jumps the layout from big to small and is really annoying . help please. im running 10.6.8 on an Imac.. i used ariel for everything and have had to change to myrad pro but this makes no diffence..what can i do to fix a courpted font that dosent exist in my computer?

I've just done a restore (it asked if i wanted to restore with the back up so I said yes) but it is exactly the same. The 'slide to unlock' doesnt slide. It was working perfectly earlier today! Do you think a system restore without the backup would make any difference?
Thanks for your help, it is very much appreciated.

Macbook Pro - Finish flaking off... and now a problem with AppleCare

Hello,
So basically I am here due to that a year into having my 15" Macbook Pro the finish started flaking off to the left of the trackpad. It has progressively gotten worse and I figured being more of a cosmetic thing there was nothing that I could do about it. So I started researching it last month to find that a lot of people have this problem with the finish coming off the 06/07 Macbook Pro's. Some said that Apple have replaced the bezel around the keyboard or the entire top part of it that the flaking is happening.
So On October 2nd I called AppleCare and spoke to someone and described my problem to them. They said that it would be covered under the AppleCare Warranty and I was extremely happy to hear that. He then explained to me that the Apple Store who replaced a bad hard drive for me once only does things like hard drive replacements and ram replacements. Something as in depth as replacing the cover in question would need someone with more specialized training. With that being said I asked if there are any local places that could take care of it so the shipping in of my laptop and shipping back to me wouldn't be needed (hoping to speed things up a bit) and they said yes and gave me a name, address and phone number of a local computer repair place that is certified to service Apple products under AppleCare.
I think dropped off my Macbook and a week later get a call saying that Apple requested pictures of the flaking finish and then denied the service saying that it was normal wear and tear (even though other people I know with Macbooks that use them far more than I have no problem like I do). I did call and speak to a supervisor at Apple and got nowhere with him, insisting it was just normal wear and tear on the laptop and that his does the same thing.
Now when I dropped off the Macbook I did explain I had contacted Apple who assured me that this would be covered. When they called me saying the service was denied by AppleCare they did state my computer was already apart anticipating parts and the repair would be carried out. Now they are holding me liable for a charge of at least $45 since they normally charge $90/hr.
Basically I am writing this to find out a couple things. First off is the finish on the Macbooks a common problem, and if so have you had it fixed under AppleCare?
Who should pay the money to get my Macbook back? Since Apple first assured me it would be covered (on a recorded line) and then they change their mind.

This is a user forum and for everyone that responds you will only be getting an opinion. Try calling AppleCare and speak to a customer representative about the issue. Be nice but firm. I'm afraid they will have the last word.

Hi my MacBook won't start up using guest user and can't get back to my log in

Hi guest user is just buffering and will not cancel

No, you marked you as the star.
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.

I am using iwork 09 on my Macbook and have a problem with all documents created in Pages, numbers and keynote. When I open and one of them every document that has ever been created, even attachements to emails that have long been deleted open up. Help!

If anyone can help with this I would be eternally grateful. I would like to be able to delete a document and not have it keep coming and asking me if I would like to save it. Even when I take the do not save option it still comes back. Is it me or the software?
Thanks
Bryan

Peggy
You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
Two more questions:
1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
Daveben

I got render and RAM preview problems. help?

i got render and RAM preview problems with after effects! please help me
when i started on a project earlier today the RAM preview was failing and it stoped making a preview after about a second, when i hit the RAM preview buttom again it continued to load and stoped again after a half second, and it continued to do that till it wasn't loading at all, just playing the same thing up even doe it haden't loaded the whole composition! BUT if i moved the (thing you see where you are on the timeline in need of a better name) it started loading a little more and then it stoped again.. so after alot of problems and moving i managed to make a RAM preview of the whole composition..
now the real problem: when i was done with my project and i was going to reender i did like this: i added my composition to the render queue, chosed my render settings and started to render, after exactly 37 frames it stoped and no window or anything poped up, the only thing that was telling me something was wrong was the render status, and it said: ''failed at 0;00;00;37'' that's not even a second! and BTW when i render after effects only uses 12% of my 6GB RAM memory.. i dont know what to do! i've tried other render settings but the same thing happens! can anyone help me?
BTW i'm swedish and only 14 so i might misspelled something..

Start here and make sure that you understand how RAM preview is supposed to work first:
http://forums.adobe.com/thread/424030
What version of After Effects? Have you installed the recent updates? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Are you rendering with OpenGL?
What are your Memory & Multiprocessing settings? Are you using Render Multiple Frames Simultaneously multiprocessing?

MacBook Won't Start and Hard Drive Full

My daughter's MacBook won't start up completely. It tells me to power off and power on again. I tried restarting using my Snow Leopard DVD and it won't let me load, re-install or restore because it says her hard drive is 100% full. Not sure how it got full and not sure how to get computer working again with no room on hard drive. Help please.

With MacBooks it's only the Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody that don't have FireWire. Which one is hers?
You can get a larger hard drive (sounds like she needs one) and an external case. Put the larger hard drive in the MacBook and do a fresh install of the Operating System and the old hard drive in the external case.
For a hard drive try Newegg.com. For larger drives go to the left hand side. http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
Here's video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here's video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/

My MacBook won't start up. After turn it on I get a grey screen with an apple in center and a circle below with lines around it and a blank bar below that. How can I get it to get beyond this screen?

MacBook won't start. After I power up, I get a light grey screen with an apple in the middle, a circle with lines moving around it and a blank grey bar below that. It won,t get beyond this. Please offer suggestions.

I have the exact same problem and waited it out and got to my homescreen. Whateve the problem is fried my bluetooth and my trackpad. I tried starting it again and couldn't even get to homescreen, it stayed on the bluescreen with the wheel of death. So, I took it to genius bar today. I was informed that my logic board is fried and it needs to be replaced. $300 repair that I'm looking at...

MacBook won't start on battery/shuts down when power adapter is removed

Help & advice needed please.
My MacBook won't start without external power, it gives a whir then a click then nothing. Once started up, if I remove the external power it just shuts off.
The battery shows at 98% & charging. Coconut Battery shows the following:
Current battery charge 4126 (& increasing as I type)
Maximum battery charge 4200
Current battery capacity 4200
Original battery capacity 5200
80%
Battery loadcycles 111
Age of your Mac 6 months
Charger connected yes
Battery is charging yes
Does anyone have a clue why the Mac won't power itself on the battery when everything else seems like it works?
Cheers!

As of today, my MacBook and I have been together for 40 days. Yesterday, while I was happily surfing (on battery), it powered down with no warning. Okay, these things happen. I plugged it in, restarted, and all seemed to be fine. Battery was about 70%. I did other things on my other machines and when it was about 90%, unplugged it and everything was good. This morning after using it unplugged for 1.5 hours it did the same thing, but decided to only work with the power adapter, not on battery alone. When trying to boot without AC, it would try to spin the CD and then fall back into off. When on AC, if I pulled the adapter, it would last two seconds and go blank. I made an appt. with the Apple store (Fashion Show Mall, Las Vegas) for 3:20pm. I got there right at 3:20pm and the monitors showed I was 5th in line. Store was fairly packed, at least one patron at every display item. Monitors also said the next MacGenius appt. was "approx. 8:30pm." Glad I made an appt! I was served about 15 min. later, during which time the monitors had changed to "No more MacGenius appts. available today, please try tomorrow." However, one guy came by without an appt. and was told he would be put on standby and to come back in 30 min.
Once I explained my issue with my MacBook battery, my Genius tried one of his batteries. "I just want to make sure it's your battery and not your motherboard." My machine worked fine, so he said "No problem, I'll have you out of here in 10 minutes." He got me a brand new battery, tested it, and put my old one in a box on the rear counter with four others. He pulled the serial number from the "About this Mac" area, didn't need my receipt for purchase date or anything. I had even printed this page: http://www.apple.com/support/macbook_macbookpro/batteryupdate/ to use as ammunition, but didn't need it. He did approve highly of my dashboard widget "iStat pro", available here: http://islayer.com/.
So the battery issue is a very common problem, and one that Apple has tried to deal with as painlessly as possible for the consumer. My Genius did ask if the battery showed an "X" in the icon bar, and I said no. Just wouldn't run on battery. On the way out of the store, one of the 3 MacBooks, in fact the one closest to the door, had an "X" on the battery icon. When I unplugged the power, it shut down immediately! The moral of the story is to contact Apple immediately with problems and give them a chance to fix them. Hope this helps others.

How do I backup all my files if my Macbook won't start up?

So a few days ago, my dad and I got into a fight - he reacted by pouring coffee all over my macbook, then continuously slammed it on the floor. There wasn't really much I could do for my macbook then, except the basic procedure of powering it off, turning it upside down, then waiting for a couple of days to use it. Luckily enough, my macbook was able to turn on, but it got stuck on the logo screen and couldn't go any further than that.
I had already planned to diagnose my macbook after an earlier water spill, and spent over $500 on tools/replacements. I bought an external hard drive to backup my computer files with before diagnosing it - but now I can't really do that since my macbook won't start up. Is there any way I can boot it up just to back up my files before they get lost forever?

yes, the HD contains all you data, SEE PIC BELOW of macbook
Do you have 2 HD in your macbook? Some macbooks are modified and have removed DVD/Superdrives and contain a second hard drive (if you didnt do that, it isnt in there)
The HD itself is sealed, however the internal armature and heads are fragile, these are like records and needle.
obviously torturing these HD heads is like shaking an old record player with its needle and arm (bad idea)
The HD is like a metal sealed box (in simple explanation)....which is GOOD.....since liquid doesnt get in there...
what is BAD is what is inside that box is fragile
also what is bad is that the underside of that "BOX" contains a control board which CAN get ruined by nasty liquids.
if this was also possible to do with the hard drive.
No, dont think of putting any liquid ON / IN the HD, ..as said the HD is sealed, but it does have a circuit board on it (controller board) you cant see in this pic above,.....nasty liquid on it can of course fry the ability to access the data ON the HD platters inside......data recovery experts can get around this,....so can I, but its costly and very "painful" to do.
see picture of that control board here> http://www.irisvista.com/tech/laptops/Toshiba-Portege-R500/small/remove-hard-dri ve-10sm.jpg
inside of a HD:

Macbook won't start after recent update

Hi Guys,
Got a problem with a month old Macbook. Clicked for the recent updates and after it restarting the Macbook won't start up past the Apple logo and the rotating symbol beneath it.
Any ideas ? Thanks in advance
Nick

Hi Nick,
Check out these two articles:
http://support.apple.com/kb/TS1541 (Mac OS X 10.5: Troubleshooting installation, startup, and login issues)
http://support.apple.com/kb/HT2956 (Troubleshooting Mac OS X installation from CD or DVD)
Running Disk Utility and trying to verify the startup volume or starting up in Safe Mode would probably be the next best course of action.

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

Macbook won't start up while firewire audio interface is plugged up

I have a m-audio firewire solo and a presonus firebox, both firewire interfaces. My macbook won't start up when either is plugged up. If I restart with it plugged up I just get a grey screen. When I disconnect it I boot up fine. Is this normal or is something wrong here?

Wire Bus:
Maximum Speed: Up to 400 Mb/sec
FW Solo:
Manufacturer: M-Audio
Model: 0x10062
GUID: 0xD6C0B007E03B7
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
FW Solo Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D

Macbook won't start

Macbook won't start up. Sounds like disc drive is spinning but screen remains dark as though startup file is not booting.

Did you also try reset of NVRAM/PRAM?
http://support.apple.com/kb/HT1379
When you tried the Command + Opt + P + R keys on restart, held almost
immediately and through the time period it should chime on startup, did
you keep holding those keys down, so as to force it to repeat the chime?
You should do this (if possible to tell) through Three chimes, before you
let those keys go; that would be indicative of a NVRAM/PRAM reset.
Aside from the details and troubleshooting processes in the SMC reset
article from Apple Support, that could shed some light on the issue, if
these were done in their subscribed order before finally trying the SMC.
Have you tried System Management Controller (SMC) reset more than once?
http://support.apple.com/kb/HT3964 {and those other troubleshooting bits}
Depending on which MacBook you have, the details may vary; with some
you could try several items not possible with a later model, such as a hard
reset of the computer (remove battery, hold power button, etc) and other
details I am not going into now... Here's something that worked for this one:
•My MacBook won't boot, no start chime, just DVD spinning sound:
http://www.ifixit.com/Answers/View/6271/My+MacBook+won%27t+boot,+no+start+chime, +just+the+DVD+spinning+sound.
There are some ideas there which may help. At least as far as trouble-
shooting. If you have access to an Apple Store with Genius Bar in the
USA or Canada, you could call ahead for an appointment to have one
of their staff genius tech persons diagnose and troubleshoot this issue.
In other locations, there may be fees charged to accommodate services.
Anyway, I an not certain what to suggest next.
Did you try booting from the Snow Leopard DVD?
Good luck & happy computing!

Macbook won't start - apple icon turns to circle with diagonal line/slash

My Macbook won't start. When I turn on the power, the apple icon appears but then after a while it changes to a circle with a diagonal line/slash, then it just shows a gray screen.
The last time I used the computer I did several software updates. Could this be causing the problem? Any suggestions for getting my computer operating again?
Thanks for any help/advice.

Yup, i encountered the same experience after a strange failed USB-loading, and a sudden shutdown of my macbook.
Luckily i manage to "safe-boot" (pressing "Shift" key once starting up the mac) my macbook so that i can save the necessary files before will lose them all.
After that i popped-in my SL Installation DVD, and did the reinstallation process. Fortunately, everything works as charm and everything is back to normal after Spotlight has done it's hard work.
Happy Apple user once again.

My macbook won't start up. ive got 3 mac and i had problem with all of them, my faith in mac is running out unfurtunally

Similar Messages

Maybe you are looking for