My macbook won't start-up, so i tried "safe mode" booting but the computer has been on for 8hrs

I'm Ubam, I have been using Macbook pro 500gb 5400-rpm hard drive, 4gb of 1333mhz DDR3 SDRAM, 2.4GHz dual core Intel core i5 processor; for 2yrs now.
The problem i'v encountered now is, I pressed the power button to shut down & it did, so now it won't start up, so I tried putting it on but everytime I press the power button it shows the screen light before login it then goes off, so I tried a "safe mode" by pressing the shift key, after that the Apple logo comes on & it has like that for 8hrs & I'm still waiting. Thanks

Hi ibiubam,
Thank you for using Apple Support Communities. 
The following article should help you sort out what might be preventing your MacBook from booting up. 
Troubleshooting: My computer won't turn on - Apple Support
Regards,
Jeff D. 

Similar Messages

  • My MacBook won't start up, not even with a power cable, after the battery had been completely emptied.

    My daughter worked on the MacBook wirelessly yesterday until the battery was completely emptied. So I plugged in the Mac power cable and left it on all night long in order to recharge the battery. This morning I tried to restart the MacBook, but nothing happens.Does anyone know what can be done?

    Hi ibiubam,
    Thank you for using Apple Support Communities. 
    The following article should help you sort out what might be preventing your MacBook from booting up. 
    Troubleshooting: My computer won't turn on - Apple Support
    Regards,
    Jeff D. 

  • My ipod touch is still under warranty but the screen has been cracked for about 1month but the wifi has recently started to play up and wont work will apple cover this and give me a refurbished one whern i go to my appointment at the genius bar??

    my ipod touch is still under warranty but the screen cracked about 1 month ago and just yesterday my wifi on my ipod isw playing up and not working very well will apple give me a new one at my genius appointment?

    Very likely not.   A bvroken screen is not covered by the warranty. It also shows abuse aht voaid the warranty for the entire iPod.  Howecver, sometimes the Genius will exchange it at no cost. Otherwise yu will have to pay $99, $149 or $%199 depending upon the capacity,

  • I tried to download iOS 6 on my iPod 4 and I disconnected my iPod from my computer and now it won't load. I even tried reconnecting my iPod to the computer. Help Please!

    I tried to download iOS 6 on my iPod 4 and I disconnected my iPod from my computer and now it won't load. I even tried reconnecting my iPod to the computer. Help Please!

    I was trying to update my iTunes, so the computer asked me to restart my computer. After I selected shut down. I knew it was a mistake. What should I do?

  • I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

    I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • I'm trying to sync my Iphone 3gs and my home computer has been down for about 2 months.  I have my computer fixed now, and went to update/sync my phone and it tells me "Your apple mobile device service is not started"  How do I fix this?

    I'm trying to sync my phone.  My computer has been down for a few months.  I go to try to sync it today, and it tells me my Apple Mobile Device service is not started.  How do I fix this?  I dont know where to check for what operating system I'm on.

    See Here
    AMDS for Windows
    http://support.apple.com/kb/TS1567
    AMDS for Mac
    http://support.apple.com/kb/ht1747

  • My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading.

    My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading. I don't need the song. But I want the others to download.

    Hi there,
    You may find the information in the articles below helpful.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    -Griff W. 

  • My computer won't turn off.  It says iPhoto is doing something and iPhoto is doing nothing, the circle has been spinning for 45 minutes.

    My computer won't turn off.  It says iPhoto is doing something and iPhoto is doing nothing, the circle has been spinning for 45 minutes.

    Try that. If that doesn't help:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • My MacBook won't start up properly, and I suspect it may be the result of a power surge due to faulty wiring in my apartment.  Is this the kind of thing that can typically be repaired, and if so, at what price?

    My MacBook won't start properly.  It seems to run, but the screen won't light.  I suspect the cause is a power surge due to faulty wiring in my apartment.  Is this the kind of thing that can typically be repaired, and if so, at what price?

    you need to bring it somewhere so it can be determined exactly what is wrong with it and then an estimate can be provided.

  • MacBook-won't install/update software unless in safe mode

    Hi there, I am worried I have a virus. My computer won't update/install software unless in safe mode. It is also incredibly slow to use the internet and sometimes microsoft word will just close on me unexpectedly. It also gets very hot. I am unsure what to do about it. It is a white macbook with curved edges, I had had it about 5 years. Recently it has been having a lot of problems and I am unsure why.

    This is not something you should blame on a virus... it's extremely unlikely that you have any kind of malware, and even more unlikely that that malware is a contributing cause of these problems.
    I'd advise you to try the suggestions in my Mac Performance Guide. If nothing there helps, let us know what you found as a result of those suggestions.

  • My phone just went black and won't turn on, I have tried pluging it in to the computer and charging it! still doesn't work.

    My iPhone 4 wont turn on! Does anyone know how to turn it back on? I have tried plugging it in to the computer and tried to charge it, nothing works!

    Did you try any of the reset steps, etc. outlined in some of these forums or pretty much do nothing until it started working again? Also, do you have an iPhone 4 as Sam The AMAZING does?
    (I'm desperately grasping straws to figure out whether or not I've exasperated all options and my iPhone is lost forever...)
    Thanks, L

  • My fairly new iMac has been giving me trouble with permissions. I tried to make the owner of the hard drive myself, instead of three groups I hadn't created. Now it won't start. I''ve tried safe boot and resetting the PRAM.. Nothing.

    Reset the PRAM, safe boot, removed everything but the key
    board. Gray spinning wheel.
    It started with me trying to change permissions. I'm the
    owner, yet it would give me problem when moving files from desktop to hard drive.
    Now it says library extensions are missing. I never
    touched the library.

    Hi Ralph - likely you're right. The section below, taken from their site, looked like it may offer some hope:
    Unlock what is rightfully yours
    BatChmod can also give you back access to locked files, folders or disks. If something is locked, it can unlock it. If you no longer have permissions to files or folders, change the permissions back.
    Sometimes, a whole hard disk can become inaccessible or locked and often, BatChmod can unlock those too!
    If you moved a folder or files from another machine or another user on your machine, BatChmod can help set you up as their rightful owner.
    As you say, a re-install is probably the best way to go, but I thought that given that nothing's working correctly now it might be worth a go. If it fails desiree274 can still proceed with a re-install.

  • Firefox won't start at all. Installation is complete and on the computer.

    The shortcut icon and start icon failed to start Firefox. I reloaded 3.6 and received the "success" message. Double clicking the icons has no results. How to I start Firefox, I love this program.

    Your crashreport is:<br>
    [https://crash-stats.mozilla.com/report/index/0257823b-cb63-4ae2-b3f8-942e52110929 https://crash-stats.mozilla.com/report/index/0257823b-cb63-4ae2-b3f8-942e52110929]<br>
    Firefox 7.0 Crash Report [@ mozcomp.dll@0xab51 ] <br>
    NEW Startup crash in mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V-GO, IBM Tivoli Access Manager SSO<br>

  • HT3728 how do i reset up my macbook username and password the computer has been cleaned out and reset to original factory settings

    I just had my macbook pro cleaned out and restored to it's original facory settings. i cannot access set up assistant to configure my username and password for the computer. it does not recognize my old username and password and I can't find where to enter this information.

    Unless you erased the drive then reinstalled Mavericks you will not see the Setup Assistant to configure your initial admin account. I have no idea just what you did. But to reset to factory state means you had to first install the version of OS X that came with the computer on the gray labeled DVDs. For your model that would have been a version of Leopard. If you have a Snow Leopard DVD then you can use that instead. The process is:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Once you have 10.6.8 running you can enter the App Store with your Apple ID and re-download Mavericks to upgrade to 10.9.2.

  • When I tried to shut down my IPad( by sliding the red bar) the spinning gear started spinning and it won't shut down. The gear has been spinning for 18 hrs now. What is causing this and how can it be fixed?

    When I tried to shut down my other Ipad(by sliding the red bar) the gear symbol started spinning but it won't shut down--the gear is still spinning 18 hrs later.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

Maybe you are looking for

  • Development Environment

    I need to build a multi-tier java web application (JSP, Serlvets, EJB, JDBC, Oracle), but I've been away from Java for some time. I believe I should deploy onto the J2EE server, but I'm confused as to which development environment I should be using.

  • Session variable not passing between pages

    Hi, I've got a form that calculates checkbox values and puts them in a total field called txtTotal. When the user clicks send, I need to pass the total to a payment page.  The form page has PHP session_start(); $_SESSION['sessTotal'] = $_POST['txtTot

  • How can I see the lyrics of the songs on my IPad as I did on my iPod 5th generation?

    When I use my iPod Classic 5th generation, I could read the lyrics of my songs. How can I read them when using my iPad?

  • About single transformation in ABAP

    Hi gurus, We are trying to use single transformation to change an ABAP internal table to xml. Our structure of internal table is like below: DATA: BEGIN OF I_TOXML,                   A TYPE CHAR10,                   B TYPE CHAR10,           END OF I_

  • Urgent Patchset 10.1.0.4

    Hi All, i've installed oracle 10g 10.1.0.2 then i applied the patchset then my db become 10.1.0.4 everything works fine, as a requirement i've created new database on same machine with DBCA utility on Data warehouse template database has succesfully