My macbook wont detect that i plugged anything in the USB
its not detecting my printer when it was every other day....help!!
What happens when you manually open iTunes?
Is your iTunes the current version (11.0.4)?
Similar Messages
-
My macbook wont work unless it plugged in
my macbook wont work unless it plugged in to the charger, how much would this cost to get fixed
you need to bring it somewhere to have it looked at to determine what is wrong with it.
-
My macbook wont detect my projector. what can i do?
my macbook wont detect my projector in detect screen display. what can i do?
i have changed and bought new cables but no change. the computer seems to be the issue...
thanks joeAre you using the Apple VGA adapter or one from another company? Often the third-party adapters do not work well/reliably and the Apple one must be used.
~Lyssa -
Is there anything out there I can plug in to the USB socket that will allow me to adjust the volume?
I didn't like the iPod Touch user interface at first, but then I got used to it and now I'm back on the old scroll wheel and finding it a bit clunky to be honest. Whatsmore, I can no longer adjust the volume easily by putting my hand in my pocket and pressing the sides. Why did Apple not think to put one on them, sometimes the design over usability thing is taken too far.
Some buttons for easily flicking tracks and pausing would have been handy too.http://www.apple.com/feedback/ - Apple products feedback links
-
I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?
Have you tried:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I plugged in my phone to my macbook to transfer images. I pulled ou the usb cord without ejecting it properly and all the pictures from my phone got deleted and didint get transfered. Is there any way I can recover my photos They are really important.
Plug it back in and restore it from the backup that is made everytime you sync your phone. iPhone forums are here:
https://discussions.apple.com/community/iphone -
WiFi device that plugs directly into the USB slot on a printer?
My next door neighbor has a MacBook with Airport installed. She wants to use the portable around the house and send documents to a printer located in the basement. She does not need a router to network additional devices, so what is the most reliable, reasonably priced device that plugs directly into the printer's USB port without the use of a cable (e.g. device with receiving antenna)? Thanks.
BobWell, Badunit, it's more convenient and takes up less room if it plugs directly into the USB port, plus you save the cost of a cable unless one ships with the unit. Here are two I found at Amazon:
http://www.amazon.com/Compact-Wireless-802-11n-Newtork-Adapter/dp/B002VVITG8/ref =sr_1_6?ie=UTF8&qid=1311880281&sr=8-6
http://www.amazon.com/802-11g-Wireless-Long-Rang-Network-Adapter/dp/B0035H4164/r ef=pd_cp_e_4
Trouble is, they have too many negative reviews. Besides, just how well do they work with the Airport Extreme card since most of these reviews are not Mac related, and those that are are negative?
I'd like a device that is guaranteed to work well with the 2008 MacBook Airport card as the broadcast device. Perhaps she will have to rely on a separate Linksys router with print server. -
i have a song that wont download that i just bought from the itunes store and it says that it is corrupted and that there is an error that is err=100000
I just posted a possible solution here - https://discussions.apple.com/message/17908124#17908124
-
Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??
Also my Itunes and computer won'r reconize it
-
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store. -
I just bought an ipod touch 4th generation recently, found that it is very difficult to plug and unplug the USB cable from my ipod. Does anyone have this problem?
Some of the Dock connector cables have very small buttons on the rounded adge of the plug, which need to be pushed in to release the plug from the iPod. Look at the picture below, do you notice the "button" on the white connector edge? There's one on the other edge too and they both need to be pressed in to release the "evil looking spike" sticking out of the grey edge.
The shorter plugs (that I've seen) do not have the release mechanism, the plug simply pulls out. -
Neither my iPod Touch nor my iPhone will show up in iTunes when I plug in through the USB cable. My software is updated, I've restarted everything, I've reset the devices, but still no luck. Help?!
Check your System Profiler to see if your computer is recognizing them. You may need to reset the computers SMC.
Resetting the System Management Controller >>
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't! I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected. HELP!
Ask the Verizon store to exchange your iPhone for a different iPhone 4.
UPDATE - Sure, try ckuan's solution first. Then use mine if that fails.
Message was edited by: sberman -
My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??
Connect it to iTunes and restore it.
B-rock -
my ipod will only charge on the docking station. says it has a full charge but when I take it off the docking station it says battery is low so I've plugged it into the usb and plugged it into my wall outlet but it is still not charging. I'm not sure what generation it is, its an 80GB. Help?
The battery is possibly unable to take as much power as a normal battery. It may need a replacement battery.
Maybe you are looking for
-
How to detect external SWF has stopped not using totalFrames
Trying to find a way to detect when an externally loaded SWF has stopped. Using "totalFrames" like the example below doesn't work for what I'm trying to accomplish. I need something that simply listens and detects when the clip has stopped. Editing t
-
Hi, Im installing the SAP Best practice for Financials. The job "Activating Business Content: InfoObject Catalogs" is running for a long time (Nearly 2 hrs). Reference: B03 - General Settings for BI Integration. Can anyone tell me how long this j
-
Bluetooth Stop Working - TX2510us win7 enterprise 32bit
Hi, I have formated my laptop tx2510us and installed windows 7 enterpise 32-bit. I have installed drivers from http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4062&lc=en&dlc=en&cc=us&lang=en&product=3747931 and still can make work my bluetooth. Th
-
Incrementally appending custom XMP metadata
I have a problem writing custom XMP metadata into a PDF document (I'm using the XMP Toolkit SDK). The problem is that I don't know whether is possible to expand the XMP packet in order to append metadata incrementally into the document, and, if it is
-
To Secure Mac or not to secure Mac??????
I am fairly new to Mac, switching over from PC, and one of the biggest hurdles that I have come across is protection of the computer. Is it advisable to get a protection for Anti-Spyware, Adware and Virus protection for this system. If so does anyone