My Macbook wont load past the apple screen.

ok so I have a macbook from late 2007 and it's not loading past the apple screen. Yesterday it froze so decided to turn it off and it hasnt started up since. Ive tried safe mode, resetting the NVRAM/PRAM, and then i decided to restart it and press command v and a screen popped up saying.
npvhash=4895
PRE enabled
64 bit mode enable
darwin kernel version 18.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/release_1386
vm_page_bootstrap: 246299 free pages and 15845 wired pages
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
AppleACPICPU: Processor Id=0 LopicId=0 Enabled
AppleACPICPU: Processor Id=1 LopicId=1 Enabled
calling mpo_policy_init for TMSafetynet
Security policy losded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Quarantine
Security policy Loaded: Seatbelt sandbox policy (Sandbox)
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University for Californai. All Rights reserved.
MAC Framework successfully initialized
isong 5242 buffer headers and 4096 cluster 10 buffer headers
IOAPIC: Verdion 0x20 Vectors 64:87
ACPI: System state [so s3 s4 s5] (s3)
PFM64 0xf10000000, 0xf10000000
[ PCI configuration begin ]
PCI configurstion changed (bridge=1 device=1 cardbus=0)
[ PCI configuration end, birdges 4 devices 17 ]
AppleIntellCPUPowerManagement: (built 16:44:45 Jun 7 2011)ninitialization complete
mbinit: done (64 MB memory set
for mbuf pool)
FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001cb4fffe8bb384; max speed s400.
rooting via boot -uuid from /choosen: 49342205-A733-3921-9F2C-4D88EAA7EB64
Waiting on <dict ID="0"><key><string ID="1">[0Resources</key><string ID= "1">I0ResourceMatch</key><string ID= "2">boot -uuid-media-</string></dict>
com.apple.AppleFSCompressionTypeZlib Kmod start
com.apple.AppleFSCompressionType L\load succeeded
appleIntelCPUPowerManagementClient : ready
Got boot device = IOService:/AppleCPIPlatformExpert/PC1000/AppleACPIPCI/SATA@1F ,2/AppleAHCI/PRT2@2/I0AHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice /
IOBlockStorageDriver/ST980811AS Media/IOGUIDPartitionScheme/Untitled 102
BSD root: disk0s2, major 14, minor 2
[Bluetooth: :CSRHIDTransition] switchToHCIMode (legacy)
[Bluetooth: :CSRHIDTransition] transition complete.
CSRUSBBluetoothHCIController: :setupHardware super returned 0
AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
AppleYukon2:RxingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
disk0s2: 1/0 error.
     0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [ErrType 10] [ErrNo 5] [10Type Read] [PbnukNum 50624960] [LblkNum 8] [FSLogMsgID 142858201] [FSLogMsgOrder First]
     0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [DevNode root_device] [MountPt /] [Path /usr/lib/dyld/ . .namedfork/rsrc] [FSLogMsgID 1462858201] [FSLogMsgOrder Last]
/SourceCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtilsKern.c :344: VNOP_GETXATTR com.apple.ResourceFork for /usr/lib/dyld: 5: error
/SourceCache/AppleFSCompression/AppleFSCompression-24.4/Compressors/Type4/Compre ssorType4Imp.c.304: fh_getxattr /usr/lib/dyld: 5: error
/SoundCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtils.c:223: supplyChunk: error
decmpfs.c:1149:decmpfs_pagein_compressed: err -1
CODE SIGNING: cs_invalid_page(ox7fff5fc22000): p=1[launchd] clearing CS_VALID
Sleep prevented by SB 1, SS 0, RS 1

reading this, your hdd has unfortunately died. have you backed your system up? if you have it is not as bad as it seems.
you will have to buy a new drive and simply restore to that drive from the backup.

Similar Messages

My phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Wont load past gray apple screen

my macbook pro wont load past the grap apple screen i cant figure out whats going on with it any suggestions past the "recommended" ones? there is a crack in my screen but i dont think that would do anything to the computer running, my first thought is the HDD but i dont want to replace it if i dont need to.

sorry actually lion OS

POWERBOOK G4 14 1.33 WONT GET PAST THE APPLE SCREEN

I have a powerbook G4 14 inch 1.33 mhz processor with 256 mb of ram. The screen will not get past the apple screen. I have tried 3 seperate hard drives none of them would boot past the apple screen. The disk drive is broken, I will be replacing it shortly to put a OS X CD or disk warrior cd in it. Does anybody know what would cause this? I reset PRAM, PMU and tried booting in safe mode. It gets to the apple and then the little circle spins and spins and it doesnt load..

Heres some history of the computer. I orginally put a 12 gb hard drive cuz it came with no hard drive in it and it was working great, but then became slower and slower until it got stuck on the apple screen. i tried 2 other hard drives and they didnt work. i then replaced it with a brand new 60 gb hard drive. i also bought a new optical drive and put that in because the optical drive never worked. i have tried two different ram sticks. i have tried pressing shift,c,option none of that works. option makes it freeze on the boot screen. open firmware works...command S did work until recently...command v does not work...reset pram and nvram. reset PMU. I AM AT A LOSS. is there something i forgot to leave connected during the process that could be causing this? I get USB BOOT ERROR 0 1 1 in open firmware. I DOUBT its the logic board, because it makes the chime and I can get into open firmware and the start up screen.

My macbook air wont go past the apple screen with the loading circle.

My Macbook air (Early 2008 edition) Boots up fine, but it stays on the apple screen with the loading circle for a few minutes and then shuts down. I did the Command+v and it always stops at the same spot with:
disk0s2: I/0 error.
(see picture)
I have already tried pretty much all the commands while booting up possible, and to no avail.
Please help.

Sorry for delay been super busy at work - have you tried to boot to your operating sytem disc - by inserting the disc - then power down the unit - then power it up again while holding down the C key until you see the gear start spinning. Once it comes up - go to utilities at the top of the screen - then disc utility - then selcet your hard drive in the left hand pane and then on the right hand pane select first aid and click verify disk in the lower right hand corner - your hard drive may be failing and this test will let you know if that is the case. If so you need to backup your hard drive - replace it and put your data back on the newly placed drive. - please let me know how the verify disc goes

I have a first gen. ipod i turned it on and then it shut itself back off. Now wont go past the apple screen what happend?

My first gen.ipod shut off by itself and won't get past the first apple screen.When I turn it on the apple screen comes up then it shuts back off.

You should do a DFU.
Steps to DFU
Turn your device off. Press and hold the Power button until the Power slider appears. Slide it to the right to turn the device off. Wait for your device to completely power down before continuing.
Plug into your Computer.
Press the Power button. Hold the Power button for 3 seconds.
Press the Home button. After the first 3 seconds, press and hold the Home button while continuing to hold the Power button. Do this for 10 seconds.
Release the Power button. After exactly 10 seconds of holding both buttons, release the Power button but continue holding the Home button. After a few seconds, a message will appear in iTunes letting you know that the device has been detected. The device’s screen will remain blank if done successfully.
Then you should restore it and put all your info back.
*Make sure you back it up before you do this*

My imac wont boot past the apple screen

I installed a Java update and now my system wont start

Was this from Software Update, or some direct download?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

My iphone 3gs wont load past the apple logo

my iphone wont charge or turn on. occasionally it will charge for 20seconds then it will get stuck on the apple logo then the screen will light up slightly as if it is going to turn on but then it goes off and i cant do anything with it again for days on end, can anybody help or is it time for a new phone?

is the phone jailbroken? if it is, that could be the issue. if not, you should probably do a back up and then restore your iphone. if that doesn't fix it... well the phone is almost 5 years old, be happy you had it that long.

HT1688 My phone is turning on but will not load past the apple screen

help with my iphone 4 ive tried everything i know

Reset, hold both the home and power buttons until the iPhone restarts again, usually takes about 10 seconds of holding both buttons. If still problem, you may need to Restore the Firmware of your iPhone. If you decide to do this, try DFU Mode Restore. Steps for DFU Mode are, open iTunes on computer, connect iPhone to computer with USB Cable. Hold both Home and Power Buttons for exactly 10 seconds, release the Power button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds of holding Home button. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. If Restoring iPhone Firmware fails, and you have Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution.

Won't load past the apple screen after a while it says "restart computer"

It doesn't have a battery or a airport card would that be the issue

More than likely the logic board is toast. In that case it would be cheaper to buy a pre-owned MacBook. If you kept the disks that were included when the computer was bought new, one of them includes the Apple Hardware Test. Use that to tell you what's wrong with the computer....
Good luck!

My iPod Touch turns on but wont load past the Apple?

Does anybody know what has happened? I tried downloading some updates for my apps & the whole thing went blank for a moment, then the Apple appeared as if it were re-booting. Casually I waited, but it's now been stuck for about 30 minutes, I've since seen it flicker white & have attempted resetting it multiple times.
Should I just try to let the battery die & try resetting again then? Or is there something I can do immediately?

There here:
iPhone and iPod touch: Frozen and unresponsive
If not successful, do as you said, let the battery fully drain and charge and try again.

Neep help my ibook wont go past the apple start up n i lost the cd .. pleas help what can i do

i nedd help my ibook wont go past the apple screen n i lost the cd .. is there ne thing i can do

Hello,
What version of the OS does it have installed?
Can you boot into safe mode? http://support.apple.com/kb/HT1455?viewlocale=en_US
Which version of the IBook do you own? You can select from this list http://www.everymac.com/systems/apple/ibook/index-ibook.html

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store.

My macbook pro wont get past the grey screen at startup. Help!!

After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried booting from the original DVD but it still freezes. When I boot it in verbose mode it seems to stop at "jnl: unknown-dev: update_fs_block: error reading fs block # 3597880! (ret 5)", the Apple AHCD Disk Queue manager :: set power state is timing out and there is a disk I/O error. I have tried to reset the power manager (not sure if it worked or not) and I have also tried clearing the PRAM (again, not sure of that worked). When I try to look at the hard drive using target mode on my imac the hard drive doesn't come up but the DVD does. I'm concerned that my hard drive is fried. Any suggestions?

It would help to state in your post which remedies you tried that didn't work.
Start here > OS X Lion: If you see a gray screen at startup
If nothing there helped, try Starting up in Safe Mode
Safe Mode deletes some system caches that may help.
A Safe Mode boot takes longer than a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
If a Safe Mode boot didn't work, since your Mac has OS X v10.7 installed, restart your Mac while holding down the Command + R keys so you can access OS X Recovery built in utilities. The startup disk may need repairing.
Tip: Hold down the Eject key while starting up your Mac to eject a disc.

My ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

My Macbook wont load past the apple screen.

Similar Messages

Maybe you are looking for