My MacBookAir needs to be charged and the power cord is not lighting or charging

My MacBook Air needs to be charged so I plugged it in as usual, but the green light on the cord is not on and it is not charging.  I have tried several plugs to no avail.  Does the charging cord wear out???

You can try upgrading your device software, here is the link with the procedure
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03621&sliceId=1&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Similar Messages

  • Computer won't turn on and the power cord doesn't light up

    My problem with the computer is that it will not turn on. The battery is fully charged, power cord is plugged into a working outlet. I have held down the power button for 10 second or even longer. Nothing turns it on and the power cord doesn't light up at all. Any thing will help.
    Thanks

    First, check that your AC outlet has power. Second, see this article: Intel-based iMac- What to do if your computer won't turn on and this one Resetting MacBook and MacBook Pro System Management Controller (SMC).

  • What to do when the power cord does not connect to MacBook Pro?

    This morning I went to turn on my MacBook Pro and the power cord is not "lighting up". 

    Try a different electric outlet.
    Power
    The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, you have to contact Apple.
    A Mac comes with 90 days of free tech support from AppleCare from the date of purchase.
    AppleCare: 1-800-275-2273
    Best

  • Macbook pro shows battery not charging and the power cord has a dim green light

    hi,
      my mac book pro the battery is shown as not charging and the power cord has a dim green light ,  but the battery condition is seen as normal in system profiler , below are the details
    Battery Information:
      Model Information:
      Serial Number:  9G00102XU8VPC
      Manufacturer:  DP
      Device name:  bq20z451
      Pack Lot Code:  0000
      PCB Lot Code:  0000
      Firmware Version:  0003
      Hardware Revision:  0002
      Cell Revision:  0100
      Charge Information:
      Charge remaining (mAh):            1365
      Fully charged:            No
      Charging:            No
      Full charge capacity (mAh):            4409
      Health Information:
      Cycle count:   482
      Condition:   Normal
      Battery Installed:       Yes
      Amperage (mA):       112
      Voltage (mV):       11421
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):       15
      Disk Sleep Timer (Minutes):       10
      Display Sleep Timer (Minutes):       5
      Wake On AC Change:       No
      Wake On Clamshell Open:       Yes
      Wake On LAN:       Yes
      Current Power Source:       Yes
      Display Sleep Uses Dim:       Yes
      Battery Power:
      System Sleep Timer (Minutes):       10
      Disk Sleep Timer (Minutes):       10
      Display Sleep Timer (Minutes):       2
      Wake On AC Change:       No
      Wake On Clamshell Open:       Yes
      Display Sleep Uses Dim:       Yes
      Reduce Brightness:       Yes
    Hardware Configuration:
      UPS Installed:       No
    AC Charger Information:
      Connected:     Yes
      ID:     0x0000
      Wattage (W):     0
      Revision:     0x0000
      Family:     0x0000
      Serial Number:     0x00000000
      Charging:     No
    my system sofware overview is as follows
    System Version:  Mac OS X 10.6.8 (10K549)
      Kernel Version:  Darwin 10.8.0
      Boot Volume:  Macintosh HD
      Boot Mode:  Normal
    can you please tell me whats wrong with my mbp and how do i resolve it

    First check the connections on the power adapter and the MBP.  Make certain that they are clean and see if the spring loaded connectors on the power adapter are not stuck.
    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    If available, try another power adapter.
    If no success, bring the MBP and the power adapter to an Apple store genius bar for a free evaluation.
    Ciao.

  • HT1212 When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,

    No. You need a computer with iTunes and an internet connection.
    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

    Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

    Mac OS X: What is Safe Boot, Safe Mode?
    Mac OS X: Starting up in Safe Mode
    I have tried installing a disc to try and reinstall the operating system.
    Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    If you did manage to reach the desktop after doing any of the above
    my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge.
    Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
    I noticed the computer running slow
    How large is your hard drive and how much hard drive space do you have left?
    Mac OS X (10.4.3)
    Update to 10.4.11 using the combo update or Software Update along with all the other updates that goes along with it.

  • My ipod touch is frozen..i have an image of itunes and the power cord on the screen..was trying to do updates

    my ipod is frozen..i have an image of itunes and the power cord on the ipod screen

    What happens when you connect the iPod to your computer and try to restore via iTunes on the computer?

  • My iphone wont turn on and the power button is not functioning

    my iphonw wont turn on and the power button is not functioning

    If your power button is broken, there's not much you can do. You could go to an Apple store & do an out of warranty exchange...Apple doesn't fix iPhones, they replace them. But, I wouldn't recommend doing so, as the iPhone 3G was discontinued almost three years ago & won't run most apps in the app store.
    You'd be better served by selling it for parts & using the money to purchase a new phone.

  • Macbook shutdown. It won't reboot and the power cord isn't lit when plugged in

    Had my macbook running and it just shut down. I cannot get it to reboot and the power cord isn't lit up when it is connected to the computer. The only problem leading up to this was I could not use the computer unless the power cord was connected. Any suggestions? Thanks

    Try to chack your battery health with Battery Health which is available at Mac App Store for free.

  • My power cord is not lighting up or charging my mac book air

    My power cord is not lighting up or charging my macbook air

      1. Try another power outlet.
      2. Disconnect and reconnect the power adapter.
    3. Reset SMC.     http://support.apple.com/kb/HT3964
       Choose the method for:
      "Resetting SMC on portables with a battery you should not remove on your own".
    4. If this does not help, contact Apple.
       Genius Bar reservation:
       http://www.apple.com/retail/geniusbar/
    Best.

  • My battery isn't charging, and when I unplug my power cord, it immediately dies.  There is an "X" inside the battery icon, and the power cord light is green...how can I fix this?

    Hi,
    I bought a Macbook Pro last February, and this is the first time this issue has occurred.  My computer has been working fine, but this morning the battery icon is showing a big "X" through it, and when I unplug my power cord, the computer shuts off.  Also, the power cord light is green, which I take to mean that it can't be charged anymore.  How can I fix this?
    Thanks!!

    I had similar issue with one of the macbooks in the office. Make sure you've got latest firmware installed (run Software Update). This resolved the issue for us instantly (you may need to reboot mac AFTER firmware upgrade for this to work).

  • I have i phone 4 from verizon and the power button is not working

    I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone  8 months ago.
    What options do I have and what should I do ?

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • My ipad has a black screen and the power button is not working. Help!

    This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago  when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?

    Have you tried to give it a reset?
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.

  • HT3964 My Macbook air charges intermittently. At times when I connect the power adapter it shows that power is coming in but  says "not charging" and the led light on the power adapter does not light. At other times it charges normally. Any ideas?

    Hey guys,
    I am having problems with charging my mac Air.  Sometimes it charges perfectly but then at times much as it shows that it's getting the power from the charger, it says "not charging" and the led light on the charger does not light up. Any help?
    Rgds,
    Kido-Vj

    That can happen when you are Taxing the system. No Apple supplied AC adapter supplies enough power to both power the system and charge the battery at the same time when the system is under Heavy Load, when you are Taxing the system heavily. At those times it will draw power from both the AC adapter and the battery at the same time. So if it is drawing power from both it can't charge the battery while it is drawing power from it.

  • Laptop not even a year old and the power cord is stripping really bad and barely working

    My toshiba laptop is not even a year old and the part of the cord closest to my computer is becoming really stripped. I noticed that it got very hot during pc use, I just assumed that was normal, but I'm starting to think that this heat made the rubber very soft and caused the cord to strip. I guess my question is, do you think toshiba will replace this or will they just say that it was my fault that it happened?

    You can either use a cloud service like Google Drive, or use the built in Verizon Cloud Backup, or you could plug the phone into a computer and use it like a USB drive and copy the photos from there to the PC.  Your contacts are backup up through Google if you've been saving contacts to your Google account, otherwise Verizon has a backup on the phone as well and when you restart the phone after wipe you can select either or both accounts to restore from.
    To factory Reset:  Go to Settings (pull down notification bar click on gear top right corner).  Then go to Back up and Reset.  At the bottom is Factory data reset.  Press that then press reset phone.  It WILL be completely wiped, but it will keep the current OS version.  It'll be like you just bought it.

Maybe you are looking for

  • Setting for issue subcontract material with ME2O

    Hi, In our system presently we are issueing all the material to subcontract with MB1B movement type 541,  I wan tto knowthe settings and process of issue the material with ME2O, what settings are needed this is to control some that we can see the iss

  • How to delete attachment to reduce size of message

    I recently moved over from Eudora to Mail.app In Eudora, all attachments were put in an attachments folder, so the size of the actual message in the mailbox was small. In Mail.app, it seems that the attachments stay as part of the message, even if I

  • HTTP Status 400 error

    Every time I try to send an email with an attachment I get the above error message. Also with the message I get "The request sent by the client was syntactically incorrect (The parameter "nimlet" was not found in the HTTP request to the HttpNimletDri

  • Repetitive Stutter Audio Artifact - Presenter 7

    Hi ... I just installed Presenter 7 ( with Acrobat Pro 9 Extended ) and now published PowerPoint publications ( to local disk and to PDF ) have a brief repetitive stutter type artifact every 30 to 45 seconds in the audio tracks. Anyone else experienc

  • Lost licence, Adobe Acrobat X Pro

    Hi, I have used our Adobe products for about 3 years. All of a sudden, Adobe Acrobat X Pro has lost it's license? It doesn't accept our serial and together with our IT-guy I have tried all possible solutions? What to do? Mette