My Macbookpro 2012 won't turn on, stuck on grey screen, logo and loading bar

It is stuck on the grey screen with the logo and the loading bar, which won't pass after 30%. If i turn it on, it shows it up again but as it reaches 33% it shuts off by itself. Please, help me. I've been searching online for resolutions but there seems to be a wide variety of ways. I'm not sure which to preform as I am scared to make a mistake and accidentally make it worse. If anyone had this problem before, is there any way to fix it without re-installing stuff? Or is there a easy an safe way to preform it? Thanks.

I have a 2011 MacBookPro and I was using iPhoto a couple of days ago when I received a software update message.  I clicked OK (as the message assured me that I could continue to use my computer while updating took place).  After a while I got a meesage that iPhoto needed to be closed for the software updates to be completed, but I continued working with the intention of closing it soon.  After about another minute, the screen split into two panes (one third/two thirds split) and then froze.  Hard shutdown didn't resolve the problem and then the screen went black.  Re-starting gave me a grey screen and no functionality at all.
Repeated attempts to re-boot made no difference so I followed various peoples' suggestions on-line (using another computer).  Even the Safe Mode boot (Power button plus Shift) wouldn't work, so I trekked to an Apple store to see a genius, but was told there was a two hour wait.  I gave up and came back, and tried Safe Mode starting again.  This time it worked (why!?) and I got into the MBP, but with the vertical screen striping and limited functionality.  I tried the Safe Mode boot many times, all with the same result, but eventually I also got a message about iPhoto needing the library to be repaired.  I did this (took about 30 minutes).  Having done this, it still wouldn't start in normal mode, so I gave up for the evening.  This morning I thought I would try once more before booking a Genius Bar slot - and all was working OK (although slightly slower than normal)!!  What changed overnight I have no idea but the lesson seems to be - keep trying Safe Mode booting until it clears - very scientific!

Similar Messages

  • My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?

  • My iPhone 4 stopped receiving texts, my power button is broken, so l went to settings and reset all settings. it has been stuck on the apple logo and loading bar screen for 12 hours

    I just want to be able to use my phone, l thought maybe the battery was too low for it to finish loading so l plugged it in over night and it hasn't moved at all. What should l do?

    Take it to an Apple store to be evaluated; without a working power button, there is no further troubleshooting you can do.
    ~Lyssa

  • My iphone 4 after update ios wont turn on and stuck in restore with apple logo and loading bar not move

    When I update the ios on my Iphone 4 it wont turn on and I tried to restore it, but it stuck in restore with apple logo and loading bar not move at all, I contact apple support and they tried to help me but nothing work, then they told me to send it to replace it and I need to pay $149, that's mean if anybody has any problem with his iphone even the problem from apple software you need to pay, that's not fair at all.... I will try to sale all our apple device and by Samsung device to resolve this problems.

    I believe this means that it is bricked, just sell it for parts, to someone like me

  • My Iphone 3g 4.2.1 stuck in a apple logo and loading circle after a restore from itunes 10.4.

    My Iphone 3g 4.2.1 stuck in a apple logo and loading circle after a restore from itunes 10.4. In Itunes apears my Iphone after some minutes and i can sync it, but in the iphone display stills apple's logo. What's happen? Is a hardware problem? Itunes also frozen when complete de sync. I probe to restore from another computer and the problem persist. One of the atempts the iphone start succesfuly and all the functions work well, but when i try to sync, the phone returned in a nfrozen state.

    I too am having exactly the same problem, I can't even get to do a restore. Please can someone help?

  • I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

    I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

    The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
    iPad: Unable to update or restore
    However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly.

  • I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it.  I can't go into DFU because the home button doesn't work.

    I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it.  I can't go into DFU because the home button doesn't work.  How can I fix it?

    - See if placing the iPod in recovery mode with this program will allow a restore.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Next let the battery fully drain. After charging for at least an hour try again.

  • MBP won't boot up- stuck at grey apple logo? with gear spinning

    Ok here's my dilema ...
    I've read posts about this same problem but I can't get this mbp to do any of the suggested fixes!!
    Here's where I screwed up....
    I was playing around with iWeb 09' trying to make a better website for my company... when all of a sudden it wouldn't load from the tool bar it would bounce up and down once or twice and nothing would happen.
    I then by mistake put the file on my desktop then wanted to get rid of it so I dropped it into my trash. oops!
    Well then everytime I clicked on iweb it would say file is damaged or incomplete.
    So when I got home from work I decided to try to reinstall the application with the app disk that came with my computer.
    Well instead of being patient and figuring out how to install just the iweb app. I reinstalled the whole bundle !! oops again... I know I don't deserve to be a mac user !! but I've fell in love!!
    OK now the install finished and it asked me to restart now so I did ... and this is where I'm stuck...
    It restarts and goes to the apple grey screen with a small bar that starts to load and then disappears and gets stuck at the spinning gear.
    I've manually ejected the disc by holding down the trackpad. And I put in the os x disc and tried to get into setup by holding down C after I hear the chime and until I see the spinning gear and that doesn't pull up anything!!
    What should I do?? PLEASE HELP!!

    ok I got into single user mode... comand and s
    did the sbin/fsck -fy
    got to checking catalog file
    -keys out of order
    (4,18563)
    **rebuilding catalog B-tree.
    **the volume Macintosh HD could not be repaired.
    ***File System Was modified***
    :/ root#
    What now ?? I'm scared to do anything on my own?? EEK
    PLEASE HELP!!

  • My MacBook Pro will turn on but goes to the logo and loads.. But after loading it won't turn on

    I clicked to turn my MacBook on.. It goes to the apple logo and loads like it's going to turn on afterwards. But then, the logo just sits there for hours. What exactly is wrong and how can I fix this???

    It's hard to offer troubleshooting suggestions other than the basics when the OS system is unknown.  Each OS has it's own troubleshooting and/or diagnostics.
    Check out the following KB Article:  http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers
    ==============
    It would help us to know which comp model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    This will help in providing you with the proper and/or correct solutions.

  • Iphone stuck on apple logo and loading bar.

    Hey guys,
    My itunes seemed to crash while i was restoring my phone and now its stuck with an apple logo and an empty loading bar, also my sleep/wake/lock button doesnt work so i cant enter recovery mode, please someone help or point me in the right direction!
    Anthony

    I will help you to solve your problem, don't worry just follow as I say.
    1. Firstly it is not a big problem just do as I say.
    2. Connect your device to the PC and then launch the iTunes software.
    3. And then go for the option of 'Restore' in that iTunes.
    But if your device doesn't respond to it.
    4. Then try to update the iTunes software to latest version.
    And using windows OS means you need to uninstall the whole previous version of software and need to download and install the latest version of it.
    5. And if you are having the third party apps such as Antivirus and etc are installed then it will object your phone to respond to iTunes. So you need to update your iOS software at any cost, which is the only way to fix iPhone stuck on Apple logo.
    All the best

  • G4 Won't start. Stuck at Grey Screen with Spinning wheel

    It won't make it past this screen.
    I have a Dual G4 867Mhz with 2GB ram. (3) harddrives.
    Any Help would be greatly appreciated.
    Thanks
    The last thing that happened was last night I left my computer on downloading some stuff. When I woke up my dad had unplugged the ethernet cable and It had locked up some programs with the spinning beachball. I proceeded by trying to shut the program with apple+q. It shut down the Finder window. I then was forced to just shut down the computer by holding down the power button. I didn't try starting up again at that time, but now about 3 hours later I tried to start up again, and it's stuck at this screen.

    Install OS X on one of your disk drives. Or get a FW case and drive, then update to 10.3.9.
    Buy a copy of Disk Warrior 4.
    Ask Dad.

  • Why does my macbook pro 2012 try to start up with an apple logo and loading bar and then turn off?

    I have tried to turn my macbook on and all i am getting when i push the power button is an apple logo and a loading bar which when it loads macbook turns off. I need this to do ubiversity work. Helplo!! It wont even let me atart it in safe mode.

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Boot to Recovery and try repairing the startup disk
    OS X: About OS X Recovery - Apple Support
    Reinstall OS
    OS X Yosemite: Reinstall OS X

  • IMac G5 won't turn on, i get grey screen, 3 leds, wont boot!

    Ok,
    I'm on my girlfriends account. I've already reset the computer manually by pressing the SMU button and all that. I've done that
    http://docs.info.apple.com/article.html?artnum=300908
    followed all that.
    all 3 leds light up (most of the time) and the grey screen comes on... meaning the computer is making a connectiong with the screen. My power supply is fine, (according to led 2 because it stays on). But it wont load up paste the grey screen. I don't see osX loading up or anything.
    I'm about to call apple support but i wanted to have different avenues of getting this fixed.
    The HD spins, the ram is fine, it just all of a sudden wouldnt turn on. I get the apple "Dumm" sound and everything. This is very weird
    Thank you very much in advance

    I called Apple today and was told the following:
    If you boot from an install disk the system bypasses your software. Therefore if the disk utility, system profiler, start up disk (in preferences) do not recognize the hard drive then there is a problem with the hard drive. Because if the problem was with the software it would be able to recognize the hard drive by ignoring the software that could be corrupted.
    They are shipping me a new hard drive for me to install.

  • Ipod stuck in a apple logo and loading loop

    I just updated my iPod and now it won't boot all the way up. It's stuck at the Apple logo, or continually turns on and off but won't boot up to the home screen. Help! What should I do? Should I take it to best buy?

    I already took my ipod to bestbuy. They said that since I was updating my IoS6 and it didn't load up properly, the ipod stopped work. So I got a new one. THANK GOD FOR WARRANTY!!!!!!!!!!!

  • My imac won't start up past the grey screen, apple and spinning clock

    Hi there.  First time posting - usually either apple support website or previous threads solve the problem.  Alas, not this time.
    I have an intel imac - can't tell you much about the details as I can't get any info out of it.  I installed snow leopard about a year ago - no issue since then other than occassionally the screen goes black but nothing major.
    Yesterday, I backed up to my usual passport backup and then today, it froze.  I couldn't turn it off or restart at all so resorted to the power button.  Since then, I can turn it on, it goes to the grey screen (no blue screen) and I get the apple logo and the spinning clock/wheel.  For hours and hours....
    So, I tried one of the apple support pages and worked through - peripherals, safe boot, NVRAM, PRAM, tried to reboot with mac osx disc (the original not snow leopard) - nothing.  Absolutely nothing changes - same old grey screen, apple logo and spinning clock/wheel. 
    HELP - do I try and reboot with the snow leopard disc?  I don't know what to do next - I am no techie so half the threads don't even sound like English to me.
    Thanks in advance, hope you geniuses out there can help me out.
    abcvic

    Thanks for the reply.
    I had tried to reboot with the original disc but it never worked. The imac just spits out the disc and eventually, I am back at the grey screen, apple logo and wheel spinning. I tried it one more time following your reply. Same outcome.
    My instal disc 1 had the instruction re hardware test which I have also tried with no success. I can't remember if it came with a disc 2 though I seem to have a couple - I also have a macbook and that seems to be still alive even if it is slow.
    I tried to reboot with Snow Leopard disc - power on, chime then hold down C key. Same old - grey screen, apple logo and wheel spinning. Disc spat out eventually.
    Any other suggestions welcomed or I am off to Apple tomorrow.

Maybe you are looking for

  • EDI header segment E1EDK04 not populating

    Hello, We are currently using the intercompany EDI process to create vendor invoices based on an EDI output from a billing document.  This worked well for us, until we wanted to change our pricing procedure for tax condition type MWST print i.d. for

  • A problem with Siri

    Inmy iPhone 5,Siri has a different voice respecting iPhone 4S

  • Fbl5n, what about unadjusted amount?

    hello all can anyone tell me what is this tcode is used for? we have a requirement to knock off the credits of debitors on FIFO basis. and the aging report also on 30,60,90,120 days. please let me know how to approach this. and what is the link betwe

  • Wrapper web service for incompatible web service.

    Hey Experts, I'm stuck in a grind! I have a web service that is not compatible with Visual Composer (shows up as "Not Supported" when consumed into VC). I think this maybe due to the fact that the web service return structure is nested and complex. S

  • Two linked tables or one

    I need to choose one of the following solutions: 1- T_DOCS(ID_DOC PK, ...) and T_DEST(ID_DOC, DEST) and there are n rows in T_DEST for each element in T_DOCS . For instance: 10k elements per year in T_DOCS with 200 elements in T_DEST, for each elemen