My MacBookPro crushed and cannot restore

Hello,
My MacBook was not completing it's back up however long I left it on and was always running but no latest back. I had a complete one in Aug 13. I was prompted to restart on command R to check my disk and has since failed to boot. I have tried to re-install the OS but it does not complete. It is now four days of trying to restore and reinstall in vain. I have tried to boot on the DVD that came with in snow leopard which helps me boot but I cannot do anything else. Please advise! Apple UK is asking for £50 to take me through steps. This is crazy!!

You can restore the phone by completing a DFU restore.  You should know BEFORE you follow the directions for it though that when the phone completes the restore, if it is also Activation Locked through the iCloud settings menu it will NOT allow you to complete set up without putting in an Apple ID account information.   The phone will be completely un-usable until the Apple ID is put in: no Apps, no Internet, no anything.  You don't have to worry about this if you know your iCloud account password, can reset it, or didn't lock it with the Find My iPhone feature in addition to your restrictions password.
DFU Restore:
1. Connect your phone to your computer
2. Open iTunes
3. Press and Hold the Sleep/Wake button and Home buttons simultaneously for approximately 9-10 seconds
4. When the screen goes blank, release the Sleep/Wake button and continue holding the Home button
5. the screen MUST remain black.  If the Apple logo appears while still holding the Home button you did not time it properly (either you released Sleep/Wake too soon or too late)
6. iTunes will pop up with a small window indicating you have connected an iPhone in recovery mode and can Restore it to recover it.
7. If the apple logo appears due to incorrect timing the Recovery mode message may still appear in iTunes, but you should simply dismiss it and try again from step 3.

Similar Messages

  • I have an (-1) error code and cannot restore my I Pad2

    I have an (-1) srroe code and cannot restore my I Pad 2, any solutions

    Usually a 1 or -1 error indicates a hardware problem.
    See 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • HT5654 I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    If iTunes is otherwise working properly start with TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, otherwise move on to Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

    Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

    Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

  • TS3694 error 6 is coming up and cannot restore backup

    error 6 is coming up and cannot restore back need help please

    Generally a security software issue, read here:
    http://support.apple.com/kb/TS3125

  • I have backup-ed my iphone 3gs and cannot restore it on iphone 5s , why? the only i left is the backup , my iphone 3gs already broke into pieces...

    Help! I have backup-ed my iphone 3gs and cannot restore it on iphone 5s , why? the only i left is the backup , my iphone 3gs already broke into pieces...

    and then it came out like this....

  • HT1212 forgot passcode on iphone 5s and cannot restore it

    I forgot my passcode on iphone 5s and cannot restore it. I tried the recommended methods listed on Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support but they did not worked. Every time I tried to restore it kept asking me to allow access on iphone which I forgot the passcode. I do not have find my iphone on this phone nor icloud. I am willing to lose all my datas just to get my phone back to working. Any help would be appreciated. Thanks!

    Apparently you did not follow the instructions in that article that address your issue. If you forgot your passcode, then you cannot restore it. You have to erase it by selecting the appropriate link under Erase and Restore.
    Erase the device. Once it is erased, it will no longer need a passcode. If you are talking about an Activation Lock, that is a different matter. Is that what you are referring to?
    Cheers,
    GB

  • HT201210 I updated my ios to 5.1 and cannot restore my Ipad

    I UPDATED MY IPAD WITH IOS 5.1 AND CANNOT RESTORE IT. PLEASE HELP.

    Have you tried to force the iPad into Recovery Mode?
    http://support.apple.com/kb/ht4097

  • HT1212 forgot my iphone passcode and cannot restore because I can't turn off Find My iPhone in iCloud.

    Hi
    Please help with the subject matter:
    Forgot my iphone passcode and cannot restore because I can't turn off Find My iPhone in iCloud.

    What can I say...it's a brick..
    Visit your carrier and see if you can trade it in for a new phone..

  • "Use iTunes to Restore" and "Cannot Restore (-50.)"

    Hello,
    I changed computers from my old laptop to a desktop. It connected just fine yesterday. Today I tried to sync it up and it said that it couldn't sync for an unknown reason. Ok, so i decided to do a restore. It gave me the "cannot restore" error message. now, whenever i turn it on, it says "use iTunes to Restore." When i connect it to my computer, the ipod screen is all white and has a weird looking font that i've never seen on it before. I've tried everything i could try on the support site. please help!!

    http://support.apple.com/kb/TS1369 I dont know if it will help but there are many links to try there. sorry.

  • HT3805 I recently replaced my internal HDD and cannot restore Vault created in 3.43

    I have a late 2009 iMac and had to replace HDD. Prior to replacement I had version 3.43 and i made a vault of all existing image files on an external HDD. When I reinstalled Aperture I got version 3.44 and when I try to restore vault it will not open.

    I copied vault bact to internal HDD and tried to restore library
    1st message
    “Aperture Vault” was created by an older version of Aperture, and cannot be restored by this version.
    To import the contents of this vault, select the import button.
    2nd message
    The library cannot be imported because some of the data required for import could not be found.

  • Forgot Id and password of previous Z10 and cannot restore backup on new Z10

    I forgot BB ID and password of previous Z10 which I gave to my daughter. Cannot restore back-up done from the previous Z10 to the current one as it requires the previous ID  and password.

    samoth wrote:
    I found my previous Z10's ID but cannot re it use on current Z10. How should I go about it?
    If you are now using a NEW BlackBerryID on the device, you will need to security wipe the device, and then setup the Z10 with the other BlackBerryID.
    Article ID: KB33591 How to perform a security wipe on a BlackBerry 10 smartphone
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1222 allowed new ios settings update and now my phone has crashed and cannote restore on itunes

    allowed new setting update on iphone 4 s for ios 7 but now my phone has crashed and i cannot restore on itunes

    Hi Ozergang,
    Thanks for visiting Apple Support Communities.
    If your iPhone is unresponsive after updating and can't be restored, you may find the troubleshooting steps in these links helpful:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Best Regards,
    Jeremy

  • Ipod touch(1st gen) stuck in recovery mode and cannot restore??

    I just bought a used ipod touch 1st gen.  It was fully functional before I wiped it.  I wanted to remove all of the other person's music and personal info before I started using it. I also wanted to update ios.  I wiped it and when it restarted it was in recovery mode. I have tried to restore it and I keep getting an error message that it could not restore unknown error has occurred  (1).  I have tried troubleshooting and going through all of the steps that Apple suggests and nothing has worked.  Any suggestions?  I just want it restored and updated to the latest ios that will work with it (3.1.1 I believe) I don't know what to do at this point.

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • Frozon "Do not Disconnect" image and cannot restore

    My iPod is frozon on th "Do not Disconnet" image and mt ipod is corrupt so i need to restore it yet i can as it comes up with an error saying "There was a problem downloading the ipod software for the ipod "ipod". the requested resource was not found." any ideas i really need help cause i cant listen to any music on my ipod as it is frozon and cant restore
    Geo

    I held the "Menu" button along with the center button
    for about 6 seconds (as they state you should) and
    all of the sudden the screen finally broke from the
    "Do not disconnect" screen and began charging, now
    everything is working as it should.
    Oh my gosh, thanks so much, that did it! I, too, did not know that the "Select" button is the middle. And in fact, in all my prior repeated attempts to re-set my iPod, I had made a point of trying NOT to press the middle, but just the Menu button and the bottom button at the same time (since I thought that the bottom/play button must also be the select button). (Why did I think that? Answer -- because the 5R's instructions seemed, I mistakenly thought, to be saying to be careful not to touch the middle. I guess not. If anybody at Apple is reading this, please note that people like me can easily confused by unexplained verbiage like "Select button," apparently. Please consider tweaking the 5R's instructions to explain this to others.)

Maybe you are looking for

  • FRM-92101 error

    Hello. I'm currently learning forms and reports in 9.0.4 on a standalone pc. I have created a simple report in report builder that runs fine there. I believe I have correctly set up the button to run the report from a form in form builder. But when I

  • How to use SharePoint Environment to save the text of an image in the DB?

    Hi All, I Don't know a lot about the SharePoint Environment, But I wanna that part who is talking about getting an image from a scanner, reading the text in it and save it as a text in the DB. Any one can help me about that? or give me a link to lear

  • Templates: how do I get rid of orphaned updates?

    I've made changes to my template, and then undone those changes.  However, the change still shows up in the child pages, greyed out, so I can't delete it.  This has to do with changes made outside <html> where I got the warning message: You have adde

  • Can't install the newest version of iTunes...or anything else!

    I just got a new macbook pro today, and it shipped with snow leopard and a slightly older version of iTunes than my older macbook had. the problem is I can't run iTunes as I get a message that says "The file "iTunes library" cannot be read because it

  • My iPhone 4 is stuck on the apple logo screen, help!

    I tryed deleting some of my most used apps, and as I was re-installing one it was taking forever so i decided to reset it by holding down the lock and home button at the same time. It's been sitting on the apple logo screen for almost an hour now and