My macbookpro that I dual boot with windows 7 has stop working

I dual boot my macbook pro with windows 7 but now it has stop working. how can I get the mac os and windows 7 both working again?

I've tried that but it boots into windows, i have tried pressing X and a variety of other shortcuts but it stubbornly still goes into windows. Any other thoughts? (Thanks for the response).

Similar Messages

Arch does not show up in Grub when dual booting with windows 8

I just installed Arch linux, dual booting with windows 8 using the beginners guide[https://wiki.archlinux.org/index.php/Beginners'_Guide] itself. Now Grub is installed and i can only find Windows 8 and I cannot find Arch. Is there a way I can find if arch linux has been installed and show up in Grub.
Sorry, I am a newbie, but i chose to post this topic here and not newbie corner as it is installation related.
My windows 8 is installed on /dev/sda1 with ntfs partition type. Arch Linux is installed on /dev/sda6 and it is ext4 partition. I dont know if this info helps. I am using Thinkpad R61
Last edited by sutro_droid (2013-03-06 00:30:48)

ivokosir wrote:It may be that you didn't install os-prober before running grub-mkconfig. This happened to me once, I hope I'm not too late to warn you.
I am sorry, yes you are too late. I have wiped windows 8 and performed clean install. No regrets. And as a matter of fact, I did grub-config and then installed os-prober. That could be the problem. Thanks. I will try this again another time.

Dual Boot with Windows ME

i am very new to all this stuff. Can someone please guide me on how to go about installing Unix so that it also dual boots with windows ME.
i am planning on doing some unix work..and installing oracle and learning oracle in the bargain at home. do u think this is the best way to go. any suggestions/guidance is appreciated.
many many thanks

I'd consider buying a second, inexpensive PC for Solaris. You can get a $20 mechanical switch that will let you share a single monitor. If two keyboards and mice are inconvenient, you can buy a KVM (keyboard-video-mouse) switch. If you just want to hack around, it's much more convenient to have two PCs. (IMHO)

[SOLVED] RTC and dual booting with Windows 8/8.1

I am planning ahead of installing Arch on a windows 8.1 laptop, and need to understand whether or not the known Windows registry hack to get windows to use UTC for the RTC is still valid for Windows 8/8.1? I have been searching via google and the usual sources of information, but it is not clear to me if there are problems doing this, specifically if arch is dual booted with Windows 8/8.1 rather than older versions of the MS OS. Certainly I have used the technique without any problem in the past when dual booting Windows XP with Arch on several different machines.
Does anyone have personal experience with doing this on a Windows 8 or 8.1 machine and can report here on whether it works successfully or not?
Thanks for any advice.
Last edited by mcloaked (2014-02-11 21:16:21)

Since there were no replies at this point I thought I would just go ahead and implement the registry hack on the Windows 8.1 O/S in the laptop and see if Windows behaves. It appears to be OK, with the displayed time being correct after reboot, and time synchronisation remaining fine with no problems seen in the displayed time, although I won't be able to read the RTC directly until I have completed the Arch install in the coming week or two. I now don't foresee any issues with the time synchronisation between booting Arch and Windows 8.1 so I will mark this as solved.
Since the RTC is now in UTC then normal clock config in Arch using chrony should perform normally once the install is done and the new system set up.
Last edited by mcloaked (2014-02-11 21:17:11)

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy

I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?

I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?

Hi Noel,
I'm wondering whether your comment addressed to Lmono was intended for me Tmono.
You ask: "So why didn't you provide the same?"
It just didn't occur to me to do so.
My intent was to report that there was at least one other user encountering a similar problem. It occurred to me that Adobe might be interested in determining the scale of a problem which causes one of their best known products to fail to run quite so completely after a clean install
I also see that I misreported the OS I'm running - its Windows 8.
If there is further information I can provide which might be helpful in determining a solution, if someone could be specific about what would be helpful, then I will try to respond appropriately.
Perhaps the following from the event log:
Faulting application name: Photoshop.exe, version: 15.1.0.148, time stamp: 0x53d97a8f
Faulting module name: igdfcl64.dll, version: 8.1.0.2875, time stamp: 0x507eff6d
Exception code: 0xc0000005
Fault offset: 0x0000000000809283
Faulting process id: 0x1f48
Faulting application start time: 0x01cfca332430f3a7
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\igdfcl64.dll
Report Id: 659ea6c9-3626-11e4-bea1-9c2a70825e62
Faulting package full name:
Faulting package-relative application ID:
The X230 has Intel HD 4000 graphics support built in to the processor. Windows was pretty stubborn about refusing driver updates, but I just managed to get drivers from the Intel site to install and Photoshop is now running, so hopefully I need not try your patience any further.
In case anyone else has a similar problem and stumbles on this the way to install the driver that worked was to:
- download the zip version of the generic driver from Intel
- use the 'have disk' option in the windows dialog to install the driver - other paths in the UI did not work with windows refusing to install the driver.

64 bit Win 7, Itunes 10.5. Can open Itunes and play music, try to open store and it says "Windowa has stopped working" and closes both Windows and Itunes?? Worked beofre I updated to Itunes 10.5 Tried so many things!! HELP!

Have Windows 7, 64 bit. Updated ITunes to 10.5 and now I cant open store? I can play music but when trying to open store, or anything else, I get :
"windows has stopped working and is shutting down" and then Windows and ITunes close?? I have tried so many things?? Help!!

Yeah, I wrote this wrong. Its ITunes has stopped working and Windows is trying to solve problem, then shuts down.
I have un-installed , re-installed. Tried earlier version and that wont work any more. Changes firewall, pop-ups whatever...........nothing works. And Apple has been no help. Run test and it says all test are good even to Apple store??

Dual Booting with Windows 8 and 7 Pro in a G6 - 2235us Notebook

I have a G6 - 2235us Notebook 64 bit that came with Windows 8.0 installed.
I would like to install Windows 7 Pro and make it dual book with Windows 8.0 with 7 as the default to start.
Would you please give me steps as to how to proceed and also the drivers, etc I would need to download.
Thank you.
This question was solved.
View Solution.

Thank you Paul. I understad I just have one more question:
I found this page that gives info about dual booting:
http://www.pagestart.com/win8dbwin701181301.html
From your expertise, would you say the steps suggested on that
page could succeed for making Win 8 and 7 dual boot in this particular machine?

When dual-booting with Windows 7, Mac OSX time settings reset every reboot.

I have recently installed Windows 7 Professional on my mid 2010 MacBook Pro via BootCamp (Running Mavericks BTW). Everything runs grean and have not experienced any problems on the Windows side, but I have a problem with Mac OSX now. When I am using Windows 7, and I reboot into Mac OSX, I find that my time settings are wrong. It seems like my time zone has changed, because the date is correct, as well as the minutes, but the hour is always wrong. When I go to Date & Time in System Preferences, and my time zone is correct, but I still have to chage the hour in the time. Any ideas as to why this is happening and how to stop it would be greatly appreciated.

If you dual boot your Windows PC with OS X or Linux, you may have experienced a problem in which your clocks reset themselves incorrectly every time you boot into Windows. Here's a simple registry edit to fix that.
Essentially, the incorrect clock setting happens because OS X and Linux use GMT time while Windows tries to synchronize with your local time zone, getting confused when you reboot between the two. Apple's own Boot Camp drivers for Windows are supposed to fix this problem, though some users have noticed that it still happens even with the drivers installed, and some Linux users are left out in the cold. Furthermore, if you have a Hackintosh, you can't install the Boot Camp drivers, so you'll need to find another way around the problem.
To fix it, just hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
Lastly, reboot into OS X, then reboot back into Windows. You should now notice that your clock actually displays the correct time.

HP Envy 700-430qe DT CTO - - - Trying to dual boot with Windows 7

HELP HELP HELP
I know how to set up double boot for several different HP computers, based mostly from what I have learned in this great forum, but this one has me stumped.
I have been trying to install Windows 7 on this computer to double boot with Windows 8.1. I have tried to set the bios up correctly, enabled legacy, disabled secure boot, disabled fast boot. I booted under UEFI to get in to GPT mode, still no luck at all.
The installation always goes all the way through the first 4 steps and through most of the 5th. After the reboot in the 5th step, it stops and can not go any further. A message appears without any error code.
I think it may be a problem in this computers UEIF settings, but I do not know if anymore of them to try.
I can use all the help you all can offer.
Thank, Brad
PS, If we ever get this to work, then I will have to ask you where to find drivers for this model, if they exist!

Hi Brad,
According to the information that you posted you have a W8 delivered PC.
If the graphics card in your PC can run in legacy mode then you should be OK.
I suggest that you use a separate HP for W7 as you will probably run into partition placement issues when you try to install W7 to the same HD. Installation to the same HD is not impossible but you will have to remove some partitions such as the recovery partition and then resize the "C" partition to make room for W7. You should be able to use Disk Management to delete partitions and resize the "C" partition.
Be sure to create the external HP recovery media as it will be needed. Backup your data to separate external media.You should also consider installing the HP diagnostics to an external flash drive.
Boot in the BIOS and set the BIOS to legacy mode and fast boot off. Save the changes on exit.
Now boot up the external recovery media (don't select the EFI media if shown) and reload your PC with W8.
If your PC boots up and runs OK then you should be good to load W7.
If you are using a separate HD for W7 then unplug the original HD. If you don't then W7 will install a boot manager to the primary HD.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Windows has stopped working error message with new iPad2

Can some one please help me. I have the latest iTunes software 10.4 which has been working fine up to today when i tried to get my iPad2 up and running. I have also updated my iPad to the latest software as well. When syncing either books or photos, the program will work for some time anywhere between 50 & 150 books or 300 & 450 photos and then I get the error message that iTunes has stopped working and windows has shut it down. I am running win7 64bit with 6gig RAM on a HP DV7 laptop.

How much storage space do you have available on your iPad 2? if could by running out of space. Also try restarting your iPad 2 by holding down the on/off and home buttons at the same time until you see the Apple logo.

Why does iTunes crash with 'iTunes has stopped working' on startup?

This only happens when the computer is connected to the internet. If I switch wi-fi off first, iTunes can start, and then I can switch it on again, and it works just fine. It is really annoying! I have seen elsewhere that the 'iTunes has stopped working' message can be caused by outdated graphics card drivers. I have the latest version of both iTunes for Win 7, and the latest graphics drivers.
I have also tried 'repairing' iTunes, and deinstalling and reinstalling it.
The message 'accessing iTunes store' typically pops up just before iTunes crashes, about ten seconds after I click the iTunes icon to start it.
The error goes on to say 'A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.'
THANKS IN ADVANCE!!!
Jonathan

Hi, kerry229.
Here are a couple helpful troubleshooting articles that I would recommend when experiencing issues with iTunes becoming unresponsive or unexpectedly closing.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Cheers,
Jason H.

PSE12 Crashes with "Program has stopped working"

I am having the the same problem as is stated here http://forums.adobe.com/message/6040575#6040575. I can not try this solution because PSE12 does not stay up long enough for me to look for any IMPORTED TAGS in my catalog.
I tried uninstalling it and reinstalling it but when I opened PSE12 after the reinstall it still knew were my catalog was and opened it and then crashed again. Why does the uninstall leave the catalog in place? I would have thought it would remove it along with every thing else. Now I have to uninstall it again and go through my folders and find anything that has PSE12 in the name and delete it by hand.
This is getting very frustrating as I have not had more then 7 days of a functioning program before it starts to crash on me.
I love PSE and have not had any problems with preveous releases until this one.
Running on Windows 7 Home Premium SP1

UPDATE: I uninstalled and reinstalled PSE12 (twice seeing as the uninstall does not get rid of everything it should) and as I was converting and checking all my catalogs for "Imported Tags" I got the "Program has stopped working" error message again. I give up. I want to get my sons money back for this program as he gave it to me as a Christms Present.
I really wonder if anyone from Adobe ever looks at any thng here on these forums. So far I have not seen any evidence to suggest that they do. So far Adobe support sucks.
Message was edited by: RayGoLXXV

I have itunes installed on computer but when I click on the itunes shortcut it says it has stopped working, tried to update and it said it had done it but still coming up with itunes has stopped working. Don't know what else to do?

I have itunes on my computer and haven't used it for a while and went to click on shortcut and got message that it has stopped working so tried to update, followed all promptsd and it said it had been installed but when i clicked on shortcut again came up with same message. I have tried to uninstall and re install still get same message. Don't know why or what to do? Also tried to set up my dads Ipod Nano on his computer and it wont accept the Australian area code? ????Help Please going insane

Does iTunes not see the phone?
If not, make sure you're running the current version of iTunes.
If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos.

My macbookpro that I dual boot with windows 7 has stop working

Similar Messages

Maybe you are looking for