My machine is slowly crashing, help pls :(

here's a screen shot from my laptop:
You see the upper menu, the text doesn't display anymore. My net is getting slower. And my mail has totally crashed, won't open. It says mail quit unexpectedly.

there's the screen shot i forgot to attach.

Similar Messages

Crashing during Export - I tried to export my sequence both in Premier and AME and it keeps crashing - Help Pls.

Crashing during Exporting - I tried to export my sequence containing several clips both in Premier and AME and it keeps crashing - Help Pls.

Thanks for your reply John.
My Premiere Pro is CS5.5 on Windows OS with all the recent updates installed.
My source footage is H.264 in a .mov/QuickTime format.
There were no error message(s) before the crashing. The computer just crashes after a few minutes of exporting. My output codec is also H.264 in a QuickTime movie format.
No other software is running at the time. Also, no third party codecs have been installed.
I'm not sure what type of engine I use. Kindly direct me to where I can find this information.
The problem has only happened with my final output.
Thanks Again.
Gloria

Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

I have the exact same issue right now!

DESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashing

LDESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashingRHi all. Hoping someone out there can help; I've been going around in circles for far too long on this.
Exec summary:
WinXP, SP3, Audio finally is working, Creative Console launches but crashes consistently. Diagnostics fails, on-screen could not install.
System:
WinXP, SP3
Story
I had an original X-Fi card that came with my Dell XPS70 3 years ago. Working perfectly, until I upgraded to WinXP, SP3 (from SP2).
BAM - lots of BSODs, always in ha20x2k.sys. Many times, all networking would just stop, and the BSOD would happen when shutting down the computer. Networking would fail 00% everytime I watched any kind of video (news, youtube, whatever).
Couldn't find more current drivers, bought X-Fi ExtremeGamer card from Frys. Could not get this to install off the package CD, new card was not recognized by Windows. Install would always hang on "On-Screen display" (I have a dual monitor system - should that matter?)
Eventually, downloaded more current drivers and console app from the Creative website and got audio working. Console will now launch but the moment I try to change something in the EQ panel, the console crashes, 00% of the time. Other Creative apps (e.g. diagnostics) fail with this error:? "The audio device supported by this application may not be present or may be operating in an unsupported mode..."
I haven't been able to "cleansweep" my system, the link in this (Creative) forum is broken.
REALLY hoping someone can help get this working... Have spent 2 days away from business to try to make this work properly, and am out of things to try.
Thanks,
Jerry

I should add - I have NO interest in gaming, just looking for high-end audio...

Hi, my mac book pro, spotlight indexing process not compleate last 1 week. what should i do.. my machine speed are very poor. pls help

hi, my mac book pro, spotlight indexing process not compleate last 1 week. what should i do.. my machine speed are very poor. pls help

System Preference/Spotlight/Privacy
drag your disk into the list, excluding it temproraily from the indexing procedure.
Restart your mac, and open the Privacy page again, click the disk and the minus button to re-incorporate it into the procedure and restart the indexing.
Or just try your luck in Disk Utility/First Aid/Repair Disk Permission first.
See if these help

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we did

having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha

How to create matrix template help pls

hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
Rajesh

This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/

Hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!

hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!

Hello Laurabcn,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario

I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
Re: can i install windows for pc on my mac or do i need the windows for mac?

There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

My machine is slowly crashing, help pls :(

Similar Messages

Maybe you are looking for