My machine meets requirements, I cannot install??? does anyone else have this issue?
here is the error I am getting.
ERROR: ASU has quit unexpectedly.
ERROR: Media DB Error : 18
What software are you trying to download and install?
Possible solutions:
1) Simply reboot the machine and retry to install.
2) Try to install in silent mode.
If you're on a Mac, try the following:
1) ShutDown you Mac
2) Boot the Mac while holding down the shift key untill the Login Window appears. This boots in the safe mode.
3) Login and open the CS6 Disk Image
4) Copy the contents of the disk image (Blue PS Icon) to the desktop
5) Launch the installer from the desktop NOT the Disk Image
7) Reboot the Mac so that the without the Shift key to re-enable the system extensions
Hope it helps
Similar Messages
-
My RDIO app no longer works on my iPad. Does anyone else have this issue?
My RDIO app is not working on my iPad since they did an update. Does anyone else have this issue?
Hi klucas54,
Thanks for visiting Apple Support Communities.
If the RDIO app is not working after the app was updated, start with the helpful troubleshooting tips in this article:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Best Regards,
Jeremy -
After updating to IOS8, my iPad 2, which has both AT&T cellular and wifi, needs to be completely turned off and rebooted to get cellular service. Does anyone else have this issue ?
Hi Hi Steve Giusto,
If you are having issues with Xxx_state issue here_xxX, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
HT5137
Next, I would try restarting the iPhone -
HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
HT4137
Thanks for using Apple Support Communities.
Best,
Brett L ,
If you are having issues with your iPad not staying connected to cellular service, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPad -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPad as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L -
my ipad2 doesnt connect to wifi as well as my original ipad, does anyone else have this issue?, my ipad2 doesnt connect to wifi as well as my original ipad, does anyone else have this issue?
If this does not help, please post the make and model of your Wi-Fi router. Maybe there is a way to monitor the connections from the router side.
Even if the iPad2 has a bad Wi-Fi radio or antenna , the chance of you getting another one should be small. Also if you go to an Apple Store, I am sure you will be able to test it before you leave the store.
Actually, my bet is riding on sibling rivalry. -
My Game Center is not letting me log in on my ipad but I have no issues with my iPhone. Does anyone else have this issue lately. This has just stared recently. When I go to Game Center is just trying to load continuously.
I have the same exact problem. I have literally done everything that everyone says works but it hasn't solved mine. I went to the Recieved at and It has my number and my email right under neath it but I can not select my Number. My Email is clickable but my number is like a super faded grey not like you can't see it but it is not close to black.
PLEASSEEE HELP!!!! -
Recently upgraded my iphone 4 to ios 5. I have a problem with imessage and sms. I have some contacts that I don't want to send sms to ever. So I set the "Send As SMS = off" thinking it would not ever send sms(unless I set it to). However, in the middle of imessage conversation with almost a full 3G signal it just sent as SMS. Then back to imessage. Totaly ignored the do no send sms setting.Has anyone else seen this issue? I wish the they would seperate these two apps so they could never cross up. Some people only have data and others have both.
CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.
Built-in Zoom functions:
*http://support.mozilla.com/en-US/kb/Page+Zoom
*http://support.mozilla.com/en-US/kb/Text+Zoom
Zoom Add-ons:
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
MBA 2013 Powering Off By Itself. Does anyone else have this issue?
A few minutes after I unboxed my MBA mid 2013 and started setting it up the machine started shutting down by itself. It wont let me restore, reinstall OSX or anything because it shuts itself down before it can complete the process with 90%+ battery remaining. Going to get it looked at today.
I'm pretty bummed out because I wanted to take this to a conference next week in CA instead of my elderly 2010 MBP.
Any idea what might be causing it? Has anyone else seen this behavior on the new MBA?It sounds like its over heating to me, leave it switched off for half an hour and try to confirm in istatspro (dashboard) that the exhaust fan is running.
They'll probably just swap it stright out for you.
good luck. -
Does anyone else have this issue where Only a few files do not sync?
Adobe Creative Cloud Desktop Sync Does Not Work! Adobe Cannot Figure Out Why. In the creative cloud folder the green check-marks that indicated that the file is synced do not appear anymore.
Wow! I am sorry to hear that! 100 files is Major. Really 1 file is too much with all the claims being made by Adobe. I have had 2 chat sessions and a 3 hour phone call and still no avail. I have used the creative cloud cleaner I have wiped it from my system re-downloaded several times updated to the latest version. Now I know It isn't just Me. Thank You For Your Valuable Time! OK ADOBE Needs to get on this pronto, we are losing work and the problem is on Mac And PC. Very interesting. If You absolutely must force a sync You must do it online in your creative cloud website:( Hopefully this will be resolved soon. If you have a breakthrough please let me know. Thanks.
-
I have a pwoer Mac with a dual quad processor and current os. If I turn off the computer at night and power up the next day my wireless mouse and keyboard do not work nor does my hardwired mouse. I have to hold the power button to re-boot the computer to get it to work.
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
And/or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I previously had the iphone 4 and on the same routers never droped a facetime call nor did my wifi router restar... is this a 4s issue??? pls help
I'm willing to bet it's dropping the connection because the router is rebooting. Try updating the firmware of the router. If that doesn't stop it re-starting spontaneously, I'd look into a new router.
-
it hasnt happened before the update just would like for it to stop
HI again Andy,
The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
which (I thought) worked better than the "throwaway" ones I had used previously.
You think it is the hub or something connected to it that may be causing the problem?
Regardless, thank you for your time, and I hope to hear from you soon. -
I have Safari 7.0.6 and OS 10.9.4. I cannot install any extensions. Everytime I select install I get an error message, "Cannot instal extension" Does anyone else have this problem?
Thanks SteveBack up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
My new iPad keeps "crashing" (losing apps, usually not Apple). This requires me to do a reset/erase and restore from backup. Does anyone else have this problem?
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Since I installed the update for Mindjolt games, it will not let me in. Does anyone else have this problem?
Try resetting the iPad. Simultaneously hold down the Home and the On buttons until the iPad shuts off. Ignore the off slider if it should appear. This should take only about ten seconds or so. Once shut down is compete, turn the iPad back on.
-
I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?
Hi Tom
On my machine it seems that the fi ligature doesn't exist with Times New Roman (installed version is 5.01.3x)
It's available in Warnock Pro but the st one which is designed in Warnock doesn't apply.
This last screenshot was made from Linotype Explore, the old free version.
Typography isn't really easy, even with modern tools
Yvan KOENIG (VALLAURIS, France) lundi 6 juin 2011 14:53:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
Maybe you are looking for
-
Hi All, Also I have tried by removing access for that user and opened the Dta Form but still it throwing me the same error: You are trying to open the data form, but cannot because all of the required dimensions are not present. Possible causes may b
-
[unsolved] BCache issues - Can't figure out what I'm doing wrong
My setup is as follows: SSD on /dev/sda HDD on /dev/sdb I'm doing a EFI setup, so basically I need nothing more that an ESP and ROOT partition on /dev/sdb. I don't mind too much if the ESP partition is cached, but I suspect that could cause problems.
-
Day after I got it - stalling at blue screen
Hi All, Just got a newly refurbished 20" iMac yesterday. Worked perfectly fine last night. This morning, I went to turn it on and left it there for a while. Then I came back and it was asleep, and b/c I didn't have much time and didn't remember how t
-
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
-
Spry Menu and IE Issue (Hover Font Size)
I'm not able to figure out why the hover focus setting works fine with Firefox or Chrome, but I can't find a setting in the CSS to ensure the value for the font on a hover within IE remains fixed. on a hover, the font size increases slighly in IE and