My maci mini wont start up. What can I do?

IM getting the grey apple then the wheel spins for a while then stops. I had just done the software update.

Mac OS X: Gray screen appears during startup

Similar Messages

  • My Mac wont start! what can i do?

    My Mac wont start! After i restarted it for a update it just crash when i try to start it what can i do?

    What and why aren't people doing something simple that has worked for the last 10 yrs:
    Clone your system before you ever apply updates
    Always have a working bootable backup (or two)
    Keep the prior version on the shelf
    Keep the combo updates around also.
    It is not hard or rocket science.
    There is no mechanism to undo rollback or restore check points. No utility to sandbox updates and revert as they sometimes go wrong. Things that are overdue.
    MicroMat made having an "eDrive" partition s sinch to do and was its own recovery/emergency boot partition.
    Carbon Copy Cloner has been around since 10.2.2, and later SuperDuper and others, Clone X etc.
    A clean install is simple. Keeping your emergency boot drive for maintenance updated but with just Apple OS and essential drivers.
    Use Safe Boot beforehand. People used AppleJack before updates or at first freeze or sign of trouble.
    If you have more than enough room for TimeMachine, then a couple options:
    Set aside 35GB is more than enough for emergency boot maintenance (Lion Recovery is nice but doesn't have everything your toolbox might want or need)...
    Set up a partition large enough for your working system, again 40-80GB should be enough, you won't clone everything as you can leave your home account folders for TimeMachine if you want (but do want to copy your home Llibrary ~/Library). perfect job for Carbon Copy Cloner.
    Setting up an external boot drive is 101 along with TimeMachine.
    Not a good idea to have all your eggs in one basket two or more backup drives is better but...
    TimeMachine - 350% your total files and changes needed to have file history archived,
    Emergency OS
    Clone OS
    I prefer a 1.5TB minimum.would do fine for most.

  • Mac min wont start

    gray screen comes up with the apple and the loader symbol spins but just does not come in, few days before i was having issues with the drive and graphics, is this a goner?
    it is a g4 1.5 512mb superdrive model

    If the drive is clicking, it may be defective, which could affect startup: I've had several G4 towers refuse to boot if the optical drive was dead, even with no disk in the drive.
    Can you boot to single-user mode (hold apple+s keys on startup)? If so, use the "fsck -fy" command to run file system check (Repair Disk).
    Another thing to try, if you have access to another Mac, is to start your mini in Target mode and see whether it mounts when you connect it via firewire to another Mac. If it mounts, you can try running Disk Utility and see whether that helps.
    Andrew Penner

  • Mac mini is giong slow. what can I do

    I noticed that my Mac was moving a bit slow.  I cleared out programs and photos which freed up storage.  I then downloaded Mavericks.  Now my Mac Mini is loading slowly and opening programs slowly.  what can I do.  I have 19 G of storage and the machine has 2 Gigs of memory. 

    Try:
    http://www.macworld.com/article/2026650/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.html
    https://discussions.apple.com/thread/5629907?tstart=0

  • I am unable to use my external CD player. I am told that the player is being used by another application, and that is not true. I have quit everything and restarted. I've unplugged the unit. I have a fairly new mac mini 10.8. What can I do?

    I am unable to use my external CD player. I have a fairly new mac mini 10.8. I am told that the player is being used by another application, but it's not true. I've forced everything to quit and restarted. I've even unplugged the unit and let it rest. I've turned off and unplugged the mac too. I cannot make a CD. Why?

    I misread your message. I thought it said I did not have burn support with the Samsung hardware.
    When the CD goes in it says You inserted a bland CD. choose an action from the popup menu or click ignore
    open finder
    open itunes
    open disk utility
    make this action the default
    eject         ignore           ok
    However, when I am making CDs. I am in itunes. That is where my recordings areI haven't tried to do it from this vantage point.
    I don't know how to make a screen shot on a mac.
    I go to my playlist and click on the little gear icon at the bottom left and I leave things as they are - preferred speed - maximum. I leave it on audio CD - and then I select BURN.
    When I tried this the other day, I could not get it to burn, no matter how hard I tried - everything I could think of, using a different CD, force quitting everything I was not using, restarting the computer, unplugging the CD hardware and plugging it back in after a little while, nothing worked. I got that message that said my player was being used by another application every time I tried to make the CD.  This took over an hour. I don't know of another way to make a CD on the mac; I was not using another program or application. Now it seems to be working fine. I am burning another copy of something I gave away.
    I wish I knew what caused this. It was a real problem Saturday morning.

  • Wireless keyboard won't connect to mac mini at start-up: what do I do?

    My new wireless keyboard won't connect to my new mac mini: what do I need to do?

    do you have a normal usb keyboard & mouse too? 
    have you gone through these steps?
    http://support.apple.com/kb/TS3048
    of course you need a working mouse to go through these steps....i think everyone should keep a usb set on hand to resolve these kinds of issues.....

  • Mac Mini wont start after power outage, and problem copying iPhoto library. HELP!

        So, recently there was a power outage in my neighborhood, the power was intermitent for about 2 hours, during this time my mac rebooted itself several times, but on the second time it rebooted the power went out during boot, then the power finally went out for good, it was back in about 3 hours, but when i finnaly turned on my mac it got stuck at the Apple logo with a spinning wheel and a progress bar that wouldnt go past 40%, when i boot holding command -v it said that there were a lot of errors which were automatically fixed, except for one, "Incorrect Thread records" or something like that.
        I have another partition with Mountain Lion installed for emergencies, the other one with Lion became inaccessible to mountain lion or any other OS X version, but oddly enough, I can access my Lion partition via HFSexplorer and see all my files untouched.
        My main concern are my pictures in iPhoto, and thats about 36Gb of data, I want to backup them to my windows pc by copying the whole iPhoto library package, but HFSexplores for some reason cant copy the folders with date (XX/XX/XXXX) with the /, and it keeps changing them to XX_XX_XXXX and I know that would pretty much break my iPhoto library!
    I googled my drive problem and people said that I need a Disk Utility called DiskWarrior, but I cant seem to find how to to use it, I got a copy from a friend, it was the digital version of the boot disk which need to be burned to a dvd.
    Any help would be appreciated, and sorry for the bad english

    OK, we need more info about your Mac. Do you know how much RAM it has in it?
    If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
    http://www.chipmunk.nl/klantenservice/applemodel.html
    http://www.appleserialnumberinfo.com/Desktop/index.php
    How to find the serial number of your Apple hardware product...
    http://support.apple.com/kb/HT1349

  • Since the later updates of in the 3.x series, I've had increasing losses of functioning of bookmarks & history, with 4.x it's gone, with latest update, Firefox slowed to non-funcitoning on my Mac Mini under OS X - What can I do to make it work again?

    '''bold text'''I am not computer savvy. That may be understated.
    I've enjoyed Firefox til the later updates to the 3.x version. First lost ability to update my bookmarks and history, but the old remained. With the 4.x updates, I lost all bookmarks and history and could not page back -- big problem. I have not addressed these problems because I have bigger life problems, and had hoped my husband would take care of it all. Not hoping any more. With the latest 5 version update, Firefox is not functioning, too slow to be workable, and getting hung. When it hung, it hung with a troubleshooting message, but I didn't save it. Will try to reproduce that and put it into the next section in this communication form. (I got the uselessly slow, but not the hang up message. Sorry.) It also slightly scrambled the display of writing on the page I pulled up.
    I was doing a google search for a Gallery website.
    Please give me some Firefox Fixes For Dummies level advice that will help me get my favorite browser back. THANK YOU.

    Hi Suzy Q,
    I can send and receive calls.
    I get "messaging stopped" when doing a lot of texts.
    Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid  on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
    When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
    It runs slow.
    I have 5 apps on here. I should be able to have a  lot of apps on here, and play music, and have files, and...and....and.
    I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
    When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
    I get VZWAVS has stopped. (not sure if those are the right letters)
    The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
    I get a black screen on occasion.
    sometimes the proximity sensor doesn't work.
    sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
    I soft reboot often--turn it off wait a bit and

  • I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    Good work, thanks for the report.

  • Iam trying to buy OS Lion to my Imac but i can not buy  because its saying Mac OSX 10.7 requires at least 2 GB of memomie and mine has 1 GB what can i do?

    iam trying to buy OS Lion to my Imac but i can not buy  because its saying Mac OSX 10.7 requires at least 2 GB of memomie and mine has 1 GB what can i do?

    If it's just a question of memory, you can buy and install more. It could also be that your iMac is just not compatile with Lion.
    Minimum requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.

  • HT201077 I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

    I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

    The following is from this Apple Document: iCloud: Photo Stream FAQ
    What do I need to use Photo Stream?
    To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
    iPhone, iPad, or iPod touch with iOS 6.0 or later
    Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
    PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
    Apple TV (2nd generation) with Software Update 5.1 or later
    You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
    iPhone, iPad, or iPod touch with iOS 5.1 or later
    Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
    PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
    Apple TV (2nd generation) with Software Update 5.0 or later
    For complete iCloud setup instructions, visit How to set up iCloud.
    You need Mt. Lion in order to use Shared Photo Streams.
    OT

  • My mac mini wont shut down when i try it does restard instead and said it has recovery from a problem. How can i sort this out?

    I've installed the new ios on my mac mini and ever since i can not shut down my computer, it does now restard itshelf and give me a messages saing that it has shut down because of a problem.
    Why is that?
    How can I sort this out?
    Thanks guys!

    Welcome to Apple Communities
    http://www.reedcorner.net/understanding-upgrade-nightmares/ Do a PRAM and SMC reset and see if it appears

  • I just bought a age of empires mac version for my macbook pro 15 inch and it wont start. What do I do?

    I just bought Age of Empires III for my new 15 inch Macbook pro but it wont start. What do I do?

    Insert it while you are in Windows, if it does not autostart run setup.exe.
    Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

  • My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it.

    My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it. I've tried different power plugs. Going direct into the wall, through a power strip. By iteslf, with other devices plugged in. I removed hard drives, and some RAM, and nothing. Sometimes it would not turn on, and then some minutes later it works. So its was sparatic, but now its been the same situation for three days where it wont turn on.
    I'm guessing power supply, but I wanted to see if anyone had a similar expereince and what the solution was, before I drag this beast to my local Apple store and have them look at it. Its a real pain to get it there and back and I want to be armed with some info for them. I already dragged this to them when it first started to do this, and of course it started up just fine for them. And you know if it works for the Genius then theres nothing wrong with. No matter what you explain to them.
    I figure if anyone had a the same problem and was able to resolve it, I can relate that experience to the Genius even if it start up for them.
    Thanks

    Try a SMC Reset using the extended method:
    Remove the AC power cord.
    Press the power-on button. [This drains the stored charge from the power supply]
    wait a quarter minute.
    Restore the power cord, being certain to JAM it into the socket, as the big block of rubber inhibits proper seating.
    wait a quarter minute
    attempt to power on.
    If no joy, examine the button battery half-hidden behind the graphics card. Remove it to measure the Voltage. A new battery should not cost over US$5, and measures a little over 3 Volts. BR-2032 is used in garage door opener controls and car door locks controls. The geeks at Radio Shack can measure it for you.

  • ITunes crashed now Mac mini wont power back on

    iTunes crashed now Mac mini wont power back on

    You have not provided any information on which to base troubleshooting. Minimal information would include the Model Mac mini you have for example Mid 2010 Mac mini, exactly what happened when iTunes crashed, and what -- if anything -- happens when you try to restart. It is unlikely iTunes has anything to do with the failure to reboot but instead iTunes crashed because of what even caused your Man mini to fail.
    Just as a starting point, be sure and check all your connections, power, monitor, keyboard, mouse, everything. You would not be the first to have a plug come adrift unexpectedly.

Maybe you are looking for

  • Need URGENT help on Log4cpp....

    Hi all, I have written a C++ program which uses Log4cpp. Here I have written the following statement to use property file- log4cpp::PropertyConfigurator::configure ("/home/tests/log/testlog.properties"); -as the first statement of the program(within

  • Beachball of Death

    Hi - recently I am seeing The Gear a huge amount. Applications frequently crash altogether and the whole system has become very shaky. I use MacJanitor and MacSweeper (though, they crash too!) and I have repaired permissions in Disc Utility. Does any

  • Flashing "Running Security Scan..."

    On Windows 7, 64-bit, MS Office 2010; when I try to launch an online software that integrates a fillable-form into my Adobe Acrobat 9 Standard, at the bottom of my IE9 screen, flashing nearly 2 times per second, I see messages that say:  "Running Sec

  • Random Numbers with Objective-C

    Hey Guys, I'm creating a blackjack program and I need to randomize 52 numbers, ensuring not to repeat any number. I know I can use the following to generate a number between 1-52, but I need the to eliminate the possibility of the same card being dra

  • Email Event Generator to read out-box on Exchange server

    I know Email Event Generator could read in-box, can it also read out-box on Exchange server? if yes, how could i configure to read outbox?