My MackBookPro doesn't boot. Any idears of what to do?

My MackBookPro started to shot down without any warning 4 months ago. This got more and more frequent, and last week it didn't boot at all.
I changed the harddisk to a Solid State Flashdrive (SAMSUNG EVO 500 GB), which helped, but today I can't start the computer again.
The computer is from 2009/2010.
Any idears of what to do?
Thabks a lot!

Is this on a mac or iOS device? If it is on a mac then open the iTunes store and click on your apple id in the upper right hand corner. then type in your password if it asks, then click the home button on the nav bar at the top of the itunes store window. Then see if the credit has refreshed. If that didn't work then quit itunes and re-open.
If it is on an iOS device let me know.

Similar Messages

  • My ipod touch 3g turns on but doesn't have any icons. What do I do?

    My ipod touch 3g turns on, has the display picture, but doesn't have any icons. What do I do? No safari, music, videos, app store, itunes, no apps at all! I've tried restoring it, but it tells me "the ipod could not be restored. This device isn't eligible for the requested build". It won't let me do anything. Goes back to the empty screen and search. HELP!!!

    The Apple article listed at the bottom of this post states:
    Cannot be restored. This device is not eligible for the requested build: If you receive this error, you likely do not have the latest version of iTunes installed. Check http://www.apple.com/itunes/download/ for the latest available version of iTunes. If you do have the latest version of iTunes, this can occur when you attempt to restore using an older .ipsw file. Try restoring in a new user to ensure that iTunes downloads a new IPSW. Downgrading to a previous version is not supported.
    From:
    http://support.apple.com/kb/TS1275

  • MBP17 shut down by itself, now doesn't boot up, black screen - what now?

    I was processing some photos in PS CS3 and my macbookpro 17" (2006 model - not sure exactly what version of 10.4 I have - its gotten every auto update that Apple sends me, No Leopard though) and it shut down on its own. It was plugged in at the time.
    I tried to power it back on after 10 minutes and the light on the lid release would come on and then leave. So I waited more. Finally, it powered up and the light would come on, but its dim. The screen stays black. Close lid and light gets brighter. I can hear fans running and the sound of it starting up but its just a couple clicks (sounds like its coming from behind the power button).
    I've tried every Apple key combo I've come across and tried resetting NVRAM and PMU. Still nothing. Battery has all 5 lights green.
    I've read something about this "Safe Sleep" mode. Could that be the issue?
    Otherwise, how can I get to this Single User or Verbose mode if the screen stays black? Or am I pretty screwed here?
    Any help is greatly appreciated in advance! Thank you.

    Unable to put a disc in. Had a friend who tried to connect by firewire with his computer and do some diagnostics, but he was unable to connect to it.
    I press the power button and screen stays black. I hear fans going and the laptop gets warm like usual. Latch light turns on, but I hear no processor noise/clicking like you hear when you normally start up a Mac. It just sits there with a black screen. I'm unable to start up in single user or verbose. Again, I've tried resetting every possible thing to reset and powering up using every single keystroke I've come across. Unable to do anything but press the power button on & off.
    This is not a ongoing, random issue. It just shut down on its own and now won't boot up. This is the one and only issue i've had with this laptop. Its treated me well until now.
    I've got an ext enclosure ordered and on the way to check if I can at least access the HD in the meantime. Right now I'm going to let it run down on battery power to see if that will trigger something.
    Has anyone seen/heard of similar situations/occurances?

  • I changed my apple id and my password for it too. but on my ipod and mac book pro my old apple id keeps showing up and i it doesn't except any password.  what should i do??

    I NEED HELP!!!!!!
    i changed my apple id and my password (for the apple id), but on my ipod and mac book pro my old apple id keeps showing up for icloud, and i cant put either password!!! Trust me i tried..   What should i do????  So please help!!!!!!

    On your Mac, go to System Preferences>iCloud, sign out, then sign back in with the ID you want to use.
    If you're running iOS 7 on your iPod and old ID is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Trying to set up Apple TV I get to the activating screen and it doesn't go any further. What do I do?

    Help trying to set up Apple TV and it gets to the activating screen and goes no further. What do I do?

    did the google for you
    https://discussions.apple.com/thread/3113685?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=appletv+error +message+5506&oq=appletv+error+message+5506&gs_l=igoogle.3...296887.300666.0.301 334.9.9.0.0.0.0.108.669.8j1.9.0...0.0...1ac.1.GcaJvzEoeFU

  • IPad audio  output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    my iPad is a 3rd gen, 16GB wifi only model, if that helps
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

    My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
    Thank. Simon

    Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
    Thanks, Simon

  • When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

  • Mini displayport doesn't work any more

    My Mini Displayport doesn't work any more with VGA, DVi, just with the Apple Cinema Display. It started one week ago, I've tried many different monitors, but it seems to be that it only works with the Apple Cinema Display, Thunderbolt Ethernet Adapter is also accepted but nothing else. PRAM, SMC, booting from an Harddisk with Mavericks (I'm on 10.10.2), Safe Mode, nothing works. I have a Macbook Air, 11 " from Mid 2013, no warranty any more. Today I was at Bense, a german reseller (thank you guys for your effort), they did the same tests and some more, but also found nothing. Is there anyone with the same problems and a solution for it?
    Cheers
    Ayhan

    Does it work on the other command key? I typically use the one to the left of the space bar, and at one point of time, it stopped working. but then i started to use the command key to the right of the keyboard which worked. but, then i started using the one that wasn't working, and just clicking slowly rather than quickly, and now it seems to work again. Don't know why . . . but that is what happened for me.

  • My mac is slow, crashes if iPhoto is opened, doesn't boot sometimes

    Hello.
    In the last time, my MacBook Pro is very slow and crashes sometimes if I open iPhoto or some other programs.
    Sometimes, there comes a black display with some thin white lines and then I have to restart the computer.
    Also, sometimes the mac doesn't boot right (you see only a grey display after the apple symbole).
    I already repaired the system with Disk Utility and erased it to install a backup of my system.
    Thank you for your help!
    Best regards....
    Here is the EtreCheck result:
    EtreCheck version: 1.9.15 (52)
    Report generated 27. September 2014 17:42:12 MESZ
    Hardware Information: ?
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.4 GHz Intel Core i7 CPU: 4 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1680 x 1050
      AMD Radeon HD 6770M - VRAM: 1024 MB
    System Software: ?
      OS X 10.9.5 (13F34) - Uptime: 0 days 0:5:31
    Disk Information: ?
      APPLE SSD TS128C disk0 : (121,33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209,7 MB
      Macintosh HD (disk0s2) / [Startup]: 120,47 GB (14,71 GB free) (Low!)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.15) Support
      [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.15) Support
      [not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
      [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
      [not loaded] com.novatelwireless.driver.3G (3.0.15) Support
      [not loaded] com.novatelwireless.driver.3GData (3.0.15) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.15) Support
      [not loaded] com.novatelwireless.driver.NWVBE (3.0.15) Support
      [not loaded] com.novatelwireless.kext.wwan (3.0.15) Support
      [not loaded] com.option.driver.OptionHS (3.31.0) Support
      [not loaded] com.option.driver.OptionMSD (1.22.0) Support
      [not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.3) Support
    Startup Items: ?
      ChmodBPF: Path: /Library/StartupItems/ChmodBPF
      HP IO: Path: /Library/StartupItems/HP IO
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.sierrawireless.SWoCTool.plist Support
    User Launch Agents: ?
      [failed] com.adobe.ARM.[...].plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [failed] com.google.keystone.agent.plist Support
    User Login Items: ?
      MediaCentral Launcher
      ChaxHelperApp
      TheTube Helper
      fuspredownloader
      HP Scheduler
    Internet Plug-ins: ?
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 Support
      Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
      CouponPrinter-FireFox: Version: Version 1.1.5
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 1.4 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SharePointBrowserPlugin: Version: 14.2.2 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 45 Check version
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      MediaCentral  Support
    Time Machine: ?
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 112.20 GB Disk used: 98.50 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 24
      Oldest backup: ********
      Last backup: *****
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 112.20 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          4% WindowServer
          1% fontd
          0% mtmd
          0% Activity Monitor
          0% ps
    Top Processes by Memory: ?
      242 MB Safari
      106 MB com.apple.IconServicesAgent
      102 MB mds_stores
      102 MB WindowServer
      82 MB Mail
    Virtual Memory Information: ?
      151 MB Free RAM
      1.47 GB Active RAM
      1.34 GB Inactive RAM
      1.04 GB Wired RAM
      554 MB Page-ins
      0 B Page-outs

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • System doesn't boot kernel26beyond

    Since a week or so, my system doesn't boot, unless I press <enter> and the power button a few times during the process.
    Once it has booted, everything works fine, but it is highly annoying nevertheless.
    it seems to have something to do with loading my hardware.
    Boot freezes after these log messages:
    Jul 23 12:18:49 (none) Linux version 2.6.17-beyond (root@sara) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 22 22:14:12 EST 2006
    Jul 23 12:18:49 (none) BIOS-provided physical RAM map:
    Jul 23 12:18:49 (none) BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Jul 23 12:18:49 (none) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 23 12:18:49 (none) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Jul 23 12:18:49 (none) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
    Jul 23 12:18:49 (none) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
    Jul 23 12:18:49 (none) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
    Jul 23 12:18:49 (none) 0MB HIGHMEM available.
    Jul 23 12:18:49 (none) 511MB LOWMEM available.
    Jul 23 12:18:49 (none) On node 0 totalpages: 130880
    Jul 23 12:18:49 (none) DMA zone: 4096 pages, LIFO batch:0
    Jul 23 12:18:49 (none) Normal zone: 126784 pages, LIFO batch:31
    Jul 23 12:18:49 (none) DMI 2.3 present.
    Jul 23 12:18:49 (none) ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f5df0
    Jul 23 12:18:49 (none) ACPI: RSDT (v001 A M I  OEMRSDT  0x09000406 MSFT 0x00000097) @ 0x1ff40000
    Jul 23 12:18:49 (none) ACPI: FADT (v001 A M I  OEMFACP  0x09000406 MSFT 0x00000097) @ 0x1ff40200
    Jul 23 12:18:49 (none) ACPI: OEMB (v001 A M I  OEMBIOS  0x09000406 MSFT 0x00000097) @ 0x1ff50040
    Jul 23 12:18:49 (none) ACPI: DSDT (v001  1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000
    Jul 23 12:18:49 (none) ACPI: PM-Timer IO Port: 0x408
    Jul 23 12:18:49 (none) Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
    Jul 23 12:18:49 (none) Detected 1276.987 MHz processor.
    Jul 23 12:18:49 (none) Built 1 zonelists
    Jul 23 12:18:49 (none) Kernel command line: root=/dev/hda4 ro
    Jul 23 12:18:49 (none) Found and enabled local APIC!
    Jul 23 12:18:49 (none) mapped APIC to ffffd000 (fee00000)
    Jul 23 12:18:49 (none) Enabling fast FPU save and restore... done.
    Jul 23 12:18:49 (none) Enabling unmasked SIMD FPU exception support... done.
    Jul 23 12:18:49 (none) Initializing CPU#0
    Jul 23 12:18:49 (none) Event source pit configured with caps set: 07
    Jul 23 12:18:49 (none) PID hash table entries: 2048 (order: 11, 8192 bytes)
    Jul 23 12:18:49 (none) Console: colour VGA+ 80x25
    Jul 23 12:18:49 (none) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jul 23 12:18:49 (none) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jul 23 12:18:49 (none) Memory: 514844k/523520k available (1921k kernel code, 8120k reserved, 725k data, 184k init, 0k highmem)
    Jul 23 12:18:49 (none) Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Jul 23 12:18:49 (none) Calibrating delay using timer specific routine.. 2197.93 BogoMIPS (lpj=1098965)
    Jul 23 12:18:49 (none) Security Framework v1.0.0 initialized
    Jul 23 12:18:49 (none) Mount-cache hash table entries: 512
    Jul 23 12:18:49 (none) CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    Jul 23 12:18:49 (none) CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    Jul 23 12:18:49 (none) CPU: L1 I cache: 32K, L1 D cache: 32K
    Jul 23 12:18:49 (none) CPU: L2 cache: 2048K
    Jul 23 12:18:49 (none) CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
    Jul 23 12:18:49 (none) Intel machine check architecture supported.
    Jul 23 12:18:49 (none) Intel machine check reporting enabled on CPU#0.
    Jul 23 12:18:49 (none) Checking 'hlt' instruction... OK.
    Jul 23 12:18:49 (none) SMP alternatives: switching to UP code
    Jul 23 12:18:49 (none) Freeing SMP alternatives: 16k freed
    Jul 23 12:18:49 (none) checking if image is initramfs... it is
    Jul 23 12:18:49 (none) Freeing initrd memory: 404k freed
    Jul 23 12:18:49 (none) ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    Jul 23 12:18:49 (none) ACPI: setting ELCR to 0200 (from 0c30)
    Jul 23 12:18:49 (none) CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
    Jul 23 12:18:49 (none) SMP motherboard not detected.
    Jul 23 12:18:49 (none) lapic max_delta_ns: 1345393639
    Jul 23 12:18:49 (none) Event source pit new caps set: 01
    Jul 23 12:18:49 (none) Event source lapic configured with caps set: 06
    Jul 23 12:18:49 (none) Brought up 1 CPUs
    Jul 23 12:18:49 (none) migration_cost=0
    Jul 23 12:18:49 (none) NET: Registered protocol family 16
    Jul 23 12:18:49 (none) ACPI: bus type pci registered
    Jul 23 12:18:49 (none) PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    Jul 23 12:18:49 (none) Setting up standard PCI resources
    Jul 23 12:18:49 (none) ACPI: Subsystem revision 20060127
    Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
    Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.ACS_] (Node dff27900), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.AC__._INI] (Node dff27420), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI: Interpreter enabled
    Jul 23 12:18:49 (none) ACPI: Using PIC for interrupt routing
    Jul 23 12:18:49 (none) ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jul 23 12:18:49 (none) PCI: Probing PCI hardware (bus 00)
    Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
    Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.BATS] (Node dff278e0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (uteval-0158): Method execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
    Jul 23 12:18:49 (none) PCI quirk: region 0500-053f claimed by ICH4 GPIO
    Jul 23 12:18:49 (none) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Jul 23 12:18:49 (none) Boot video device is 0000:01:00.0
    Jul 23 12:18:49 (none) PCI: Transparent bridge - 0000:00:1e.0
    Jul 23 12:18:49 (none) PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
    Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
    Jul 23 12:18:49 (none) PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
    Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    Jul 23 12:18:49 (none) ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P2._PRT]
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
    Jul 23 12:18:49 (none) Linux Plug and Play Support v0.97 (c) Adam Belay
    Jul 23 12:18:49 (none) pnp: PnP ACPI init
    Jul 23 12:18:49 (none) pnp: PnP ACPI: found 15 devices
    Jul 23 12:18:49 (none) SCSI subsystem initialized
    Jul 23 12:18:49 (none) PCI: Using ACPI for IRQ routing
    Jul 23 12:18:49 (none) PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x480-0x48f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x5c0-0x5cf has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x540-0x55f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x400-0x47f could not be reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x480-0x48f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x500-0x53f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x4c0-0x4cf has been reserved
    Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:01.0
    Jul 23 12:18:49 (none) IO window: d000-dfff
    Jul 23 12:18:49 (none) MEM window: ff800000-ff8fffff
    Jul 23 12:18:49 (none) PREFETCH window: ce900000-de9fffff
    Jul 23 12:18:49 (none) PCI: Bus 3, cardbus bridge: 0000:02:01.0
    Jul 23 12:18:49 (none) IO window: 00001000-000010ff
    Jul 23 12:18:49 (none) IO window: 00001400-000014ff
    Jul 23 12:18:49 (none) PREFETCH window: 32000000-33ffffff
    Jul 23 12:18:49 (none) MEM window: 34000000-35ffffff
    Jul 23 12:18:49 (none) PCI: Bus 7, cardbus bridge: 0000:02:01.1
    Jul 23 12:18:49 (none) IO window: 00001800-000018ff
    Jul 23 12:18:49 (none) IO window: 00001c00-00001cff
    Jul 23 12:18:49 (none) PREFETCH window: 36000000-37ffffff
    Jul 23 12:18:49 (none) MEM window: 38000000-39ffffff
    Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:1e.0
    Jul 23 12:18:49 (none) IO window: 1000-1fff
    Jul 23 12:18:49 (none) MEM window: ff900000-ff9fffff
    Jul 23 12:18:49 (none) PREFETCH window: dea00000-deafffff
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1e.0 (0106 -> 0107)
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:00:1e.0 to 64
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
    Jul 23 12:18:49 (none) PCI: setting IRQ 4 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.0 to 64
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    Jul 23 12:18:49 (none) PCI: setting IRQ 11 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.1 to 64
    Jul 23 12:18:49 (none) NET: Registered protocol family 2
    Jul 23 12:18:49 (none) IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    Jul 23 12:18:49 (none) TCP established hash table entries: 16384 (order: 5, 196608 bytes)
    Jul 23 12:18:49 (none) TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
    Jul 23 12:18:49 (none) TCP: Hash tables configured (established 16384 bind 8192)
    Jul 23 12:18:49 (none) TCP reno registered
    Jul 23 12:18:49 (none) apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    Jul 23 12:18:49 (none) apm: overridden by ACPI.
    Jul 23 12:18:49 (none) VFS: Disk quotas dquot_6.5.1
    Jul 23 12:18:49 (none) Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jul 23 12:18:49 (none) Installing knfsd (copyright (C) 1996 [email protected]).
    Jul 23 12:18:49 (none) Initializing Cryptographic API
    Jul 23 12:18:49 (none) io scheduler noop registered
    Jul 23 12:18:49 (none) io scheduler anticipatory registered
    Jul 23 12:18:49 (none) io scheduler deadline registered
    Jul 23 12:18:49 (none) io scheduler cfq registered (default)
    Jul 23 12:18:49 (none) vesafb: ATI Technologies Inc., P10 , 01.00 (OEM: ATI MOBILITY RADEON 9600   )
    Jul 23 12:18:49 (none) vesafb: VBE version: 2.0
    Jul 23 12:18:49 (none) vesafb: protected mode interface info at c000:5680
    Jul 23 12:18:49 (none) vesafb: pmi: set display start = c00c56ee, set palette = c00c5728
    Jul 23 12:18:49 (none) vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
    Jul 23 12:18:49 (none) vesafb: no monitor limits have been set
    Jul 23 12:18:49 (none) vesafb: scrolling: redraw
    Jul 23 12:18:49 (none) Console: switching to colour frame buffer device 128x48
    Jul 23 12:18:49 (none) vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 6144k, total 65536k
    Jul 23 12:18:49 (none) fb0: VESA VGA frame buffer device
    Jul 23 12:18:49 (none) ACPI: AC Adapter [AC] (on-line)
    Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT0] (battery present)
    Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT1] (battery absent)
    Jul 23 12:18:49 (none) ACPI: Power Button (FF) [PWRF]
    Jul 23 12:18:49 (none) ACPI: Lid Switch [LID]
    Jul 23 12:18:49 (none) ACPI: Sleep Button (CM) [SLPB]
    Jul 23 12:18:49 (none) ACPI: Power Button (CM) [PWRB]
    Jul 23 12:18:49 (none) ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    Jul 23 12:18:49 (none) ACPI: CPU0 (power states: C1[C1] C2[C2])
    Jul 23 12:18:49 (none) ACPI: Thermal Zone [THRM] (94 C)
    Jul 23 12:18:49 (none) isapnp: Scanning for PnP cards...
    Jul 23 12:18:49 (none) isapnp: No Plug & Play device found
    Jul 23 12:18:49 (none) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    Jul 23 12:18:49 (none) serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
    Jul 23 12:18:49 (none) floppy0: no floppy controllers found
    Jul 23 12:18:49 (none) RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    Jul 23 12:18:49 (none) loop: loaded (max 8 devices)
    Jul 23 12:18:49 (none) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
    Jul 23 12:18:49 (none) i8042.c: Detected active multiplexing controller, rev 1.1.
    Jul 23 12:18:49 (none) serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 23 12:18:49 (none) mice: PS/2 mouse device common for all mice
    Jul 23 12:18:49 (none) TCP bic registered
    Jul 23 12:18:49 (none) NET: Registered protocol family 1
    Jul 23 12:18:49 (none) NET: Registered protocol family 17
    Jul 23 12:18:49 (none) Using IPI No-Shortcut mode
    Jul 23 12:18:49 (none) Suspend2 Core.
    Jul 23 12:18:49 (none) Time: tsc clocksource has been installed.
    Jul 23 12:18:49 (none) Suspend2 Compression Driver loading.
    Jul 23 12:18:49 (none) Time: acpi_pm clocksource has been installed.
    Jul 23 12:18:49 (none) Event source pit disabled
    Jul 23 12:18:49 (none) Event source lapic configured with caps set: 08
    Jul 23 12:18:49 (none) hrtimers: Switched to high resolution mode CPU 0
    Jul 23 12:18:49 (none) Suspend2 Encryption Driver loading.
    Jul 23 12:18:49 (none) Suspend2 Swap Writer loading.
    Jul 23 12:18:49 (none) Suspend2 FileWriter loading.
    Jul 23 12:18:49 (none) ACPI wakeup devices:
    Jul 23 12:18:49 (none) SMBS MODM P0P2 CBC1 USB1 USB2 USB3
    Jul 23 12:18:49 (none) ACPI: (supports S0 S3 S4 S5)
    Jul 23 12:18:49 (none) Freeing unused kernel memory: 184k freed
    Jul 23 12:18:49 (none) input: AT Translated Set 2 keyboard as /class/input/input0
    Jul 23 12:18:49 (none) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Jul 23 12:18:49 (none) ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Jul 23 12:18:49 (none) ICH4: IDE controller at PCI slot 0000:00:1f.1
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    Jul 23 12:18:49 (none) PCI: setting IRQ 10 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    Jul 23 12:18:49 (none) ICH4: chipset revision 3
    Jul 23 12:18:49 (none) ICH4: not 100% native mode: will probe irqs later
    Jul 23 12:18:49 (none) ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    Jul 23 12:18:49 (none) ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    Jul 23 12:18:49 (none) Probing IDE interface ide0...
    Jul 23 12:18:49 (none) Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
    Jul 23 12:18:49 (none) input: SynPS/2 Synaptics TouchPad as /class/input/input1
    Then I have to press enter and the powerbutton (asus M6) a few times, and then, a line at a time a couple of messages appear, then after "udev events" has passed, boot proceeds normally.
    Jul 23 12:18:49 (none) hda: IC25N060ATMR04-0, ATA DISK drive
    Jul 23 12:18:49 (none) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Jul 23 12:18:49 (none) Probing IDE interface ide1...
    Jul 23 12:18:49 (none) hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive
    Jul 23 12:18:49 (none) ide1 at 0x170-0x177,0x376 on irq 15
    Jul 23 12:18:49 (none) hda: max request size: 512KiB
    Jul 23 12:18:49 (none) hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
    Jul 23 12:18:49 (none) hda: cache flushes supported
    Jul 23 12:18:49 (none) hda: hda1 hda2 <hda5> hda3 hda4
    Jul 23 12:18:49 (none) hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Jul 23 12:18:49 (none) Uniform CD-ROM driver Revision: 3.20
    Jul 23 12:18:49 (none) kjournald starting.  Commit interval 5 seconds
    Jul 23 12:18:49 (none) EXT3-fs: mounted filesystem with ordered data mode.
    Jul 23 12:18:49 (none) usbcore: registered new driver usbfs
    Jul 23 12:18:49 (none) usbcore: registered new driver hub
    Jul 23 12:18:49 (none) Initializing USB Mass Storage driver...
    Jul 23 12:18:49 (none) usbcore: registered new driver usb-storage
    Jul 23 12:18:49 (none) USB Mass Storage support registered.
    Jul 23 12:18:49 (none) Linux agpgart interface v0.101 (c) Dave Jones
    Jul 23 12:18:49 (none) fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Jul 23 12:18:49 (none) [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
    Jul 23 12:18:49 (none) [fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
    Jul 23 12:18:49 (none) usbcore: registered new driver usblp
    Jul 23 12:18:49 (none) drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Jul 23 12:18:49 (none) Capability LSM initialized
    Jul 23 12:18:49 (none) fuse init (API version 7.6)
    Jul 23 12:18:49 (none) input: PC Speaker as /class/input/input2
    Jul 23 12:18:49 (none) NET: Registered protocol family 23
    Jul 23 12:18:49 (none) nsc-ircc, chip->init
    Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
    Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
    Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
    Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
    Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
    Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
    Jul 23 12:18:49 (none) pnp: Device 00:07 disabled.
    I am using mkinitcpio already: /boot/grub/menu.lst:
    # (0) Arch Linux
    title  Arch Linux
    root   (hd0,2)
    kernel /vmlinuz26beyond root=/dev/hda4 ro
    initrd /kernel26beyond.img
    my /etc/mkinitcpio.conf:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect ide filesystems"
    I tried removing scsi and sata, since my root is on an ide disk. But the problem persists.
    also recreating an image using mkinitcpio or reinstalling the kernel26beyond package using pacman doesn't help.
    Does anyone have any idea what might be wrong and how this problem might be resolved.
    It seems like a trivial issue since the systems basically works fine otherwise. However, I can't figure it out by myself, I have tried for a week.
    Any help would be greatly appreciated.

    I'm not sure if this will help you, but I suddenly was having a lot of trouble booting. My system would just freeze with a blinking cursor. I thought it had something to do with my floppy drive because if I changed the boot priority in my bios to boot from the hard disk 1st, the system would boot but would hang for a very long time in areas, and as long as 5 minutes loading uevents. I suspected this was a udev problem.
    I issued a few commands to reset udev, thinking maybe recent updates didn't take effect, which did the trick...
    # udevtrigger
    # udevcontrol reload_rules
    After that, everything is back to normal. I'm still learning about udev and I'm still fuzzy about a lot of the techy stuff.

  • Tecra S1 doesn't boot and hangs at (boot) splash screen

    Tecra S1 Model PT831E-107EQ-GR
    Problems started a month ago. It randomly didn't booted. After some power off/on tries it finally booted and worked properly. Because it happened more often I've bought a new hard drive (Toshiba 40 GB). I've had Acronis True Image and planned to make a disk clone to the new drive. The problem is that a notebook now doesn't boot anymore so I cannot boot it from A CD nor hard drive. It stops at "In Touch..." logo with "Press [F12] for the boot device selection menu" text and doesn't react any key. I tried to boot with no CD, no hard drive - the same. I also connected internal HD using ATA-To-USB adapter - the same. Does it mean that's not a disk problem but motherboard or other components? Is it possible to enter BIOS before boot selection screen?
    Regards,
    Jacek

    Problem solved. There was a broken PCB under the CPU socket. I've found that pressing with my finger and holding CPU while booting allowed to startup the system while releasing the finger caused system hanging and its total crash. Our local service tried to repair it but with no success. Finally two days ago we've found a working motherboard (a used one) for about 200 USD and now I'm waiting for installing it in the laptop. Th regular price for a new one (about 400 Euro) is too much, but 200 USD is OK. I do like the laptop because of its ports (LPT, RS232). It's used for programming and controlling some older devices. Newer laptops have no LPTs nor RS232s and it's not easy to find a working USB adapter because the software we're using is even from DOS times and has hard-coded IRQs for those ports.
    Anyway, I hope it'll back from the service fresh and new, and of course working ;)
    Thank you for your tips.
    Regards,
    Jacek

  • IBook G4 doesn't boot

    Hi,
    I just bought a broken iBook G4 on eBay thinking I would be able to fix it without replacing the logic board. The iBook doesn't boot properly. When I press the power button, I can hear the SuperDrive start up, then the screen with the gray Apple shows up and the OS starts to load normally. But when that screen goes away and the blue background comes up, it just stops there... no "Loading Mac OS X" window with the progress bar. I figured that this may have been a deviation of the iBook G4 logic board problem where people used clamps to pin down the left side of the iBook and hold the faulty chip to the logic board, allowing the iBook to boot. I gave it a shot, but instead of using clamps I tried putting a small rubber shim on top of the faulty chip inside of the case to see if it would work. The first time I booted it up after I placed the shim, it worked fantastically. No hanging at the loading screen, no sluggish performance.
    That was the way it worked for a couple of days. However, the booting problem soon returned. I tried booting from a Tiger reinstall disk to verify/repair the disk/permissions, but the iBook hung at the same blue screen. I didn't have the original install discs that came with the iBook, so I couldn't run a hardware test on it. I also tried booting from a Leopard install disk to no avail. Resetting the PRAM, NVRAM, and PMU did nothing as well. I even went so far as to replace the RAM in the expansion slot with RAM that I knew was working, but the iBook remained broken.
    The strangest part of this was that the iBook worked perfectly on another computer when put into TDM. I was able to verify/repair both permissions and the disk from my Power Mac G5. Even though the iBook's screen becomes scrambled with random colors and lines after a few minutes in TDM, it functions just fine on another computer. I was even able to successfully boot my Power Mac and iMac from the iBook in TDM. Seeing as this was possible, I tried reinstalling Tiger on the iBook (in TDM) remotely from my Power Mac. It worked like a charm. Following that reinstall, I downloaded and installed all of the software updates. Then I tried to boot the iBook natively again, but to no avail. It still hung at that same blue screen.
    At this point, I suspect that there is something wrong with the logic board that I am unable to fix without completely replacing the logic board itself. That's sort of disappointing, but I guess that's just the way it is. If anyone has any input to this, feel free to respond. Here are the iBook's specs:
    CPU: 1Ghz (1064Mhz)
    RAM: 256MB soldered, 1 expansion slot open
    HDD: 30GB 4200 rpm
    Screen Size: 12 inches
    Optical Drive: Combo Drive
    For the complete list of specs, see this page: http://support.apple.com/specs/iBook/iBookG4_Early2004.html
    Thanks,
    -Trevor

    Trevor,
    I just took the heatsink off and I see the GPU. However, there are multiple parts to it.
    So that would be called a daughter card. The problem with a daughter card is that the possibility of a reballing/reflowing failure is increased.
    Should I place a shim over the whole chip or just one part of it?
    It's that whole daughter card that has the problem. I've got a post around here somewhere. Here's the thread:
    http://discussions.apple.com/thread.jspa?messageID=6051715&#6051715
    The picture is here:
    http://tinyurl.com/3835w2
    Also, what material should I use for a shim here?
    Probably the most elegant solution would be to use thermal pads like the ones that are already there. Don't build them up too much.
    What about from underneath?
    My fear is that a metal shim will short the GPU and damage the logic board permanently. But I also fear that an insulating shim will not conduct heat as it is supposed to and cause the GPU to overheat.
    Dale at Superior says that chip doesn't put out much heat but better to be overly cautious. I wouldn't use metal since there's no give to it. What's directly under that 9200 daughter card? One of my thoughts was to shim from both sides.
    Where did you put that first shim?
    Richard

  • HP Stream 7-Windows 10 doesn't boot, I can't recovery 8.1 because can't boot from USB-HELP please!!

    Hi everybody, I'm new here!
    I am (scuse me: WAS) enjoying a Stream 7
    Some days ago I tried to install Windows 10 TP upgrading 8.1 with Bing. After some waiting time it succeeded, but unfortunately I forgave to put in the tablet's SSD the hp drivers, thinking they weren't necessary. So touchscreen, WiFi and all the other stuff didn't work. After I collegated via OTG a keyboard and a mouse I managed to use Windows 10.
    Trying to install drivers, my fault, I opened an .exe of Realtek (maybe for the audio), tablet asked to reboot and after that I cannot access to Windows anymore.
    I tried to boot Windows 8.1 from a USB, but it doesn't boot, the same even if i disable secure boot.
    With disabled bitlocker Windows gives this error
    In boot option I set these settings
    I put the usb in this way:
    The Stream doesn't consider the USB absolutely XD
    If I enable again the secure boot Windows gives this error (that at 99% is caused by the .exe I installed):
    Rebooting the Stream a couple of time with secure boot it goes in a menu (where touchscreen works) where there are a lot of options to reset Windows, but none of them works. If I try to format from this menu it asks for my account's password, but it doesn't accepts the mine :/
    If I try to open the recovery (from volume minus button when it starts) it gives this message:
    Waiting for help,
    Thank you for your patience!
    This question was solved.
    View Solution.

    Hi everyone. I think I have found a solution to this problem. Short background story, I too tried to install Windows 10 (10049) via Windows Update but I was never successful - got stuck at around 30% for more than an hour. I tried to restore to 8.1 but it gave me that 0xc000000f error. Luckily I had made a recovery image to USB before updating to Windows 10.
    Please note that by doing this method, you will obviously lose your data.
    Here's what you'll need:
    - Recovery USB (if you don't have one, grab it from this link and I thank you that person from another post). Follow the instructions, this is just basically clean, format to FAT32, set primary and active, and then drag and drop the files and folders from the USB folder to the root USB drive. This particular recovery is from a 5701 model, there is actually no difference between Stream 7 models in terms of hardware, but software is configured differently (different language setup/format) depending on the country/region it's sold.
    - OTG cable
    - Powered USB hub
    - USB Mouse and Keyboard
    - A moment of your time
    1. Plug in the OTG cable to the tablet, and then plug in the USB hub to power and to the OTG. After that, plug in the USB mouse and keyboard and Recovery USB to the USB hub.
    2. Boot the tablet to BIOS by holding down Power + Volume Down at the same time, until you reach the Startup Menu.
    3. Press F10 and navigate to System Configuration > Boot Options. In this menu, we'll have to restore the settings to default.
    So if you have disabled Secure Boot, you first need to Clear All Secure Boot Keys and then Load HP Factory Default Keys. Then enable Secure Boot.
    Make sure UEFI Boot Order is also default to as follows: OS boot Manager, USB Diskette, USB CD/DVD, Network Adapter.
    If you did not make any changes, proceed to 4.
    4. Be prepared to go back to the Startup Menu, because as soon as you press F10 and hit Yes, the tablet will automatically restart. So press and hold the Volume Down button after you hit on Yes.
    5. Press F9 and select Boot From EFI File. If you've done the recovery image ghosting correctly onto the Recovery USB, you should see two entries. One should be RECOVERY and the other may depend (it could be SYSTEM or No label). Select RECOVERY, and then select bootmgr.efi.
    At this point the tablet will boot off from the USB and will bring you to Windows Recovery.
    6. Select your keyboard layout, and navigate to Troubleshoot > Reset your PC.
    If the drive partition/boot manager is not damaged, it will ask for a recovery key. You can actually skip this step and hide the numpad, revealing the option Skip this drive if you don't have the recovery key anymore, or just really want to start anew.
    If the drive partition/boot manager is damaged, the Reset will proceed and will ask you to select a target operating system. In my case it was Windows 8.1.
    7. The next screen will be about Reset your PC telling you what's going to happen. Tap Yes > Yes, repartition the drives > Fully clean the drive > Reset.
    The tablet will now do its thing and restore to factory default.
    After restoration, a BIOS screen will come up asking if you want to clear the TPM keys. Select Yes, and this will create a new key for the restored installation, bringing you back to a fully factory default tablet.
    Notes:
    I recommend not installing a generic Windows 8.1 ISO that is copied straight to the USB drive using the Windows 7 USB/DVD Tool or RUFUS. They won't be compressed or the same as WIMBOOT, which will take up more storage space than stock recovery.
    You could actually install another version of Windows 8.1 on the tablet, assuming you know what you are doing (ie. making a WIMBOOT image).
    You could also actually install Windows Technical Preview directly, again, assuming you know what you are doing.
    This is just a guide to help you try recover your tablet from a failed Technical Preview installation. I hold no responsiblities over your actions.
    What I recommend is that use 8.1 for now, and wait for the official release (or at least a more stable Technical Preview release for this tablet if you can't wait that long) of Windows 10.

  • MacBook Pro Late 2008 (Unibody) doesn't boot

    Hello,
    my good old MacBook Pro Late 2008 running Mountain Lion won't boot anymore. The sleep light does not light on, the green battery status indicator light is showing that the battery is full. I had this problem two or three times, and usually my Macbook comes magically back to life after one or two days.
    At the Apple store they said I'd have to make a SMC reset, and when they did it in the store, it worked. But it doesn't work for me (and I am sure I am doing the same thing, so maybe the Apple guy was just lucky – or is there another special trick?). What could be the solution to my problem?
    Unfortunately, I can't really tell the exact specifications, but it is the standard model, and I didn't change anything since. I just had the problem that it was getting really hot like half a year ago, but then I cleaned the fans and since then it was running rather fine (just sometimes froze).
    Any help greatly appreciated!
    Julian

    I've got the same, or almost the same problem on a MBP 2008 (late).
    MBP 15.4/2.53/2X2GB/320/SD/512VRAM upgraded to 8 GB 1067 DDR3 (OWC memory)
    In my case the computer works fine when I'm able to get it on. If it is turned off and the MagSafe charger disconnected then left that way for a few hours, and the MagSafe is re-connected, let it charge for a bit, it can often be turned on via the power button. HOWEVER, .....
    If it is left OFF overnight (Apple > Shut Down .... ), and the backlit keyboard goes dark, then a little pause before closing the lid, and left overnight, it will usually not be able to be turned on. The battery is in reasonably good condition (~+3500 mAh) and the newer battery (~ guess +5000 or more mAh) it doesn't do any better, and it won't turn on. Cycle count 183.
    Take the battery out, (disconnect the MagSafe first! Never have the MagSafe charging without a batter in the computer) wait half a minute, reinstall battery (I like the 5,1 because the back section can be easily removed to access the battery and the hard drive), attach the MagSafe charger then wait a bit (few minutes), and the computer can often be turned on the first time. If not the first time then repeat the process. Tried hitting the Power button with the battery off but that doesn't seem to change anything.
    Erased the HD (Hard Drive) and reinstalled Yosemite, have Fire Vault turned off, did a Utilities (Cmd + r ) check of the hardware (no problems), also did a few other tests - no problems. PRAM reset. Investigated BONJOUR - haven't gone into the Terminal yet. Would be nice to disable Bonjour without disabling DNS. https://www.apple.com/support/bonjour/ and http://apple.stackexchange.com/questions/151485/how-do-i-disable-bonjour-visibil ity-after-yosemite-install and http://forums.obdev.com/viewtopic.php?f=1&t=6106
    The Genius Bar tested it and couldn't find a problem. Suggested the Logic Board be replaced and that i$ expen$ive! I've investigated having the Logic Board repaired and that would cost around $150 + shipping. Won't do the oven trick. Other problem sources I've come across is the graphics chip (mainly on the 2008 (early) MBPs.
    Since erasing and reinstalling OS X Yosemite the computer really screams but I've started to reinstall some of the applications (FCPX & Motion), Documents, and Movie files. Still screams though! Nothing like a real cleaning of the hard drive. Didn't do a Time Capsule-type backup because I wanted to minimize "junk". The CanoScan LiDE 90 scanner won't work because Canon won't come up with a driver to work with Yosemite. Won't buy a Canon scanner again and didn't want to buy it to begin with due to a previous Canon problem. Bought a new Canon camcorder, $1,600 + tax, back when they had mini-tapes, it at the Maxwell tape but just outside the warranty period and wanted something around $500 to fix it. Turned out that was a typical problem.
    Really running out of options and ideas at this point. Hate to send it off to repair the Logic Board. Still looking for a software or setting fix.

Maybe you are looking for

  • Dynamic URL value at runtime

    Hi, We have created an iView of type "com.sap.portal.appintegrator.sap". In URL template property we have set the following value: <System.protocol>://<System.server>:<System.port><System.uri>?parameter=value&parameter=value&... That's to say, it is

  • How do I set my iPod to play all ( continuously back to back) my podcasts without me having to select each one?

    How do I set my IPod to play all my new podcasts continuously?

  • Portal Homogenous system copy

    Hello Portal Gurus, I have just made a system copy of my PRD portal to a sandbox portal using the homogenous system copy menthod. sapinst export and sapinst import. Now we have a lot of systems connected to the portal, for eg ECC , BI for reports , A

  • Editing titles on mobileme gallery

    OK - this is a simple question... I have created albums that I have then posted to MobileMe. So in my source panel, there's a section for Events, Albums and MobileMe Galleries, amongst others. If I want to make changes to my album on MobileMe, do I d

  • Previous sessions not restore in ff 10

    just updated to ff 10.0 After a crash, previous windows and tabs are not restored. History has option for session restore grayed out. Tools, Options is set for "show my windows and tabs from last time." is this a bug in the latest version for windows