My macpro is slower after upgrading to mountain lion

Anyone having similar issues? I have more pinwheels after upgrading.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

  • Why has my Safari and MAIL slowed after upgrading to Mountain Lion on my MacBookPro ?

    Why has my Safari and MAIL slowed after upgrading to Mountain Lion ? I have mid-2009 MBPro and have very fast Internet access router.

    I have noticed the same thing on my MAC.  Mail has become very "clunky"- Before Mountain Lion, whenever I clicked on a msg or a function (delete), it would respond immediately.  With Mountain Lion there is an unacceptable hesitation.  What is going on with this latest update?

  • MacPro usb very slow after upgrading to mountain lion

    When backing up with Carbon Copy to an external USB drive very slow, eventually the system freezes. After upgrading to Mountain Lion its been a complete pain when trying to do back-ups. Does Apple have a USB software fix for this?

    Disconnect the external drive and see whether there's an improvement.

  • My 2011 Macbook has become exceedingly slow after upgrading to Mountain Lion.

    I have a 2011 Macbook which has become really slow after I upgraded to Mountain Lion in March. At first it wasn't that bad, but it's getting worse and my computer has begun to overheat even if I'm only using Google Chrome. I used to be able to keep multiple applications open at once and never closed many of them, but now if I want to get anything done I have to use the absolute minimum. My CPU has reached 86 degrees Celsius and temperatures slightly below this seem to be the average, even if I've only been on for ten minutes. It heats up VERY quickly. The fan has been operating at 2919 rpm, but it has said that for days and I don't know if this number should be changing? (I know that normal is about 2000 rpm, so I know it shouldn't be that high anyway.)
    I'm currently working on cleaning out my harddrive of duplicate and unnecessary files and I plan on restoring to the default settings and backing everything up on an external harddrive... but are there other things I should be doing to speed my computer back up, like good programs to clean out my computer's temporary memory on a regular basis? The problem seems to have come on pretty fast though, so I don't know if there could be something else wrong with it and if I should take it into an Apple-approved repair place.
    Also, I'm not one to illegally download/pirate things from sketchy websites, so I highly doubt a virus is the cause, especially given that Macs rarely get viruses.
    Any suggestions of what to do and what programs/apps to install would be greatly appreciated! Thank you!

    I have a 2011 Macbook which has become really slow after I upgraded to Mountain Lion in March. At first it wasn't that bad, but it's getting worse and my computer has begun to overheat even if I'm only using Google Chrome. I used to be able to keep multiple applications open at once and never closed many of them, but now if I want to get anything done I have to use the absolute minimum. My CPU has reached 86 degrees Celsius and temperatures slightly below this seem to be the average, even if I've only been on for ten minutes. It heats up VERY quickly. The fan has been operating at 2919 rpm, but it has said that for days and I don't know if this number should be changing? (I know that normal is about 2000 rpm, so I know it shouldn't be that high anyway.)
    I'm currently working on cleaning out my harddrive of duplicate and unnecessary files and I plan on restoring to the default settings and backing everything up on an external harddrive... but are there other things I should be doing to speed my computer back up, like good programs to clean out my computer's temporary memory on a regular basis? The problem seems to have come on pretty fast though, so I don't know if there could be something else wrong with it and if I should take it into an Apple-approved repair place.
    Also, I'm not one to illegally download/pirate things from sketchy websites, so I highly doubt a virus is the cause, especially given that Macs rarely get viruses.
    Any suggestions of what to do and what programs/apps to install would be greatly appreciated! Thank you!

  • MacBook Pro slower after upgrading to mountain lion?

    MacBook Pro 2009
    Factory setting: Snow Leopard
    Just 2 days ago, I reformatted my macbook back to its factory settings. Processing speed was fast and opening of apps does not seem to lag. Booting up and shutting down only took seconds. After reformatting my macbook, I upgraded my iOS from snow leopard to mountain lion and that is where the problems arises.
    1. Booting up and shutting takes much longer time? It used to be less than 10 seconds however, now it takes about 40-50 seconds.
    2. Opening of apps seemed to be slower. Example: When I open my iTunes, the app will bounce a few times and takes a few seconds (longer than before) for the app to appear.
    3. Whenever I try to select something when surfing net or doing some other programs, the mouse cursor will never fail to change to the "colourful ball" which I will have to wait for it to load.
    Can anyone help here?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My iMac is running extremely slow after upgrading to mountain lion

    Ever since upgrading my OS, my computer is running extremely slow. Any tips to improve performance?

    How much RAM is your system running? Do a Disk Repair and see if that resolves any issues.

  • My Mac is running super slow after upgrading to Mountain Lion....Help!

    I'm really not very good with computers so I may need a bit more basic help

    First, back up all data immediately, as your boot drive might be failing.
    One possible cause of a slow user interface is a large number of image or video files on the Desktop with preview icons. If you have more than a dozen or so such files, move them to another folder.
    Otherwise, take these steps when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Select the 50 or so most recent messages in the log. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting.

  • After upgrading to mountain lion my mac is very slow?

    Hello
    After upgrading to mountain lion my mac is very slow
    It was starting in 10 seconds and shuting dow in 5 seconds and now it's taking more than one minute to start it or shut down it and everything is slow
    why????????/
    Thanks

    First, back up all data immediately, as your boot drive might be failing.
    Take these steps when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

    Hi !
    I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
    Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
    I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
    Anybody got a solution to this other than using the iMac for offline use only ?

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

    after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

    Apple made some changes to increase security that slowed the boot time.
    Startup - Slow Boot
    Startup - Slow Boot (2)
    Startup - Slow Boot (3)

  • After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

    After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
    After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
    In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

    Well, I found the solution here in another thread.
    i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
    So I found the solution here.
    Thank you graphicsluc!!!

  • Connection issues after upgrade to Mountain Lion

    Very strange internet connection problem here after upgrade to Mountain Lion.
    I just upgraded MacBook (early 2009) to Mountain Lion. After upgrade, I'm having problems connecting to certain websites (ESPN, CNN, etc.), and I can't connect to the computer using LogMeIn.
    BUT, I do have an internet connection. Skype works, Messages works, email works, some websites work. I tested using speedtest.net and it shows good download speed, but the upload speed is so slow that it can't even perform the test. A Windows PC on the same network works fine.
    Next, I tested the MacBook on another wi-fi network at a coffee house, and everything works fine there!
    So it might appear to be something wrong with the router? I have an Cisco (Linksys) E3200 and have upgraded to the latest firmware (1.0.4). But still doesn't work.
    The firewall in Mountain Lion is turned off, and I temporarily turned off the firewall on the router and that didn't help, so doesn't appear to be any sort of firewall issue. I've never heard of an operating system being incompatible with a specific router anyway.
    Can anyone thing of any setting or something in Mountain Lion that would causing internet connection problems with a specific router?

    I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
    Clinton

  • After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occasionally lock-ups.

    After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occassionaly locks up while using Safari, Mail or Dreamweaver and I have to d a force-quit, then restart my Mac.  Anybody having similar probelms?
    I am thinking about doing a clean install of Mountain Lion.  Would I be able to restore my applications and data from Time Machine after the re-install?

    My 24 inch iMac... 2.8 GHZ dual core (Early 2008) is having the same problem.  After it sleeps, I go to use something... and the beachball of death occurs.  This happens multiple times a day... and let me tell you... it is annoying... and I am the one who is being annoyed!
    It could possibly be revolving around safari... as that is really the only thing that is running consistently.  I don't use iTunes on this iMac as I have so many other Macs up and running in the house... and I never consume media on it... so I kind of dismiss iTunes being the culprit.
    This is majorly affecting my Mac... in terms of reliability and uptime... which coincedently is the main reason why I switched to Mac in 2008.  This is my only Mac that could upgrade to ML... so I don't know how widespread this is... but I hope that this problem can be solved...
    I agree with another person who commented on this issue... do we really need a 10.8.1 update already... to fix this?

  • After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

    After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

    Did you upgrade from SnowLeopard?
    I can't get passed the complete installation
    What exactly is happening? Is GarageBand trying to download over and over again?
    all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
    The property list stores your preferences, but also the settings from the last run of the application.  If that file is corrupted in some way, you might see third behaviour.
    You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
    Perhaps you did look in he wrong place.
    in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
    Quit GarageBand, if it is running.
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
    If that does not fix the problem, post back and explain in more detail what the download problem is.
    Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
    Regards
    Léonie

  • After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

    After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

    Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
    If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12.

Maybe you are looking for

  • Error while doing MB1C

    Hi All, I'm working on IDES, I got a error while doing MB1C with movement type 561. Error is "Error accessing functional module : FMFK_FIKRS_READ. Parameter : IP_FIKRS, IP_FMA_OBJNR" Regards Nagendra

  • Help Problem Automatic TO Creation for GR PO (Mvt. 101)

    Hi Experts, I have a problem creating TO automatically when material is received from PO using movement type 101. The requirement is to receive material from PO with status QI, create and confirm TO automatically into default storage bin. But when ma

  • Finder changes the file name in Save/Save As dialogue box

    Whenever I save or save as a file, the dialogue box opens, but when I make the file list active when using a mouse, the file name I click to changes the file name I am saving. I simply want to activate the file list window so I can find the right fol

  • After new ISP iChat's Video Chat won't work

    I recently moved into a new apartment. After moving in I got At&t DSL service. After setting all this up however video chat has not been working on my Mac. I connect to the internet wirelessly through my 500GB Time Capsule. My Modem is a Motorola 221

  • Cisco gateway telnet command help

    When our phone system was installed over a year ago the tech that was onsite used a command when after he would telnet into our voce gateway that would display informatin about every call that was going through the system. For the life of me I can no