My magic mouse won't connect automatically anymore...

I'm not sure where this fits, so I decided to post it here.
Anyways, I've had my iMac since early January and it came with the Magic Mouse. It's been working fine up until 20 minutes ago when it disconnected itself. So, I turned it off and turned it back on and it wouldn't connect! Now, if I want it to connect, I have to plug in a different mouse so that I can manually click "Connect".
This has never happened before and I don't know why it's started now. I've tried un-pairing and re-pairing the mouse but that didn't solve the issue either. Anyone know the solution?

I have the same problem here. It started a few days ago and so far no luck fixing it. I am going to try a different Magic Mouse and see if that works. I will report back when I get a chance to try it.

Similar Messages

  • My magic mouse won't connect to Yosemite 10.10.2 I've tried 2 different mice with the same outcome.

    I have an early 2013 MBP with Yosemite 10.10.2. Connectivity with the magic mouse has steadily gotten worse, now it won't connect at all. I've tried connecting with two different mice, one about 5 years old and one about 2 years old, both with the same result. Any one else have this issue?

    Hello rachste,
    I'm sorry to hear you are having these mouse issues with your MacBook Pro. If you continue to have connectivity issues with your Bluetooth mice, you may find the information and troubleshooting steps outlined in the following article helpful (apologies if you have already seen it):
    Troubleshooting wireless mouse and keyboard issues - Apple Support
    Sincerely,
    - Brenden

  • Apple Magic Mouse won't connect

    I have a magic mouse and it won't connect to my macbook pro retina display. I dont know where there is a file i need to delete and if i need to do that where and how do I find it. Thank you.

    Be sure Bluetooth is turned on.
    Has the mouse been connected to something else?  If so, it needs to be deleted from that device first.
    Barry

  • Magic Mouse Won't Connect!

    I had a magic mouse that worked perfectly. I have had it since it came out. For some reason, my mac changed the Time Machine hard drive to a different one, so I deleted what had saved to the wrong hard drive, and changed where it should back up. It would not delete, so I reinstalled Snow Leopard like I was told. Then, my bluetooth magic mouse stopped working. I tried to reconnect with the "find bluetooth mouse" but that didnt work, so I tried deleting it as a pair with my computer and tried again. Still nothing. Then I searched for any bluetooth device. Nothing. I searched for the "wireless mouse software 1.0" but once the snow leopard version downloaded, it said there was an error with my hard drive. I tried the Leopard version, and it said that a newer version was installed on my computer already. I am currently using the latest version of snow leopard with an iMac with intel. What do I do?

    Turn the mouse off. Turn the mouse on. You should see the green light start blinking on the mouse by the switch.
    Wait a couple of seconds, then click the mouse.
    If it doesn't connect automatically, go to the Bluetooth preferences. Delete your mouse from the left panel, if it's there. Press + to open the Assistant, and click the mouse again. Is the mouse detected?

  • My magic mouse won't connect to bluetooth, my magic mouse won't connect to bluetooth

    how do i connect magic mouse to bluetooth on imac?

    Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

  • Magic Mouse won't work in Windows 7 anymore

    Hey there,
    I've got an iMac running OS X 10.6.8 and Windows 7 via Boot Camp. I just updated a bunch of the Apple stuff on Windows -- iTunes, Quicktime, "boot camp" (I assume that meant drivers and such), and whatnot. Now my Magic Mouse won't work in Windows 7. It was fine before, so I assume the update screwed something up. Help? I know nothing of retrieving old drivers and stuff like that.
    Note: I am running Snow Leopard, NOT Lion.

    Hi bsruff,
    If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
    Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
    http://support.apple.com/kb/TS3092
    Regards,
    - Brenden

  • Suddenly my magic mouse won't track properly, can anyone help?

    Suddenly my magic mouse won't track around the screen properly, can anyone help? It was working fine then it started sticking. It scrolls from top to bottom fine just the on screen movement is effected. The battery is showing 100%, I've changed the fast/slow slider all the way to the right which has helped a little and unpaired it from bluetooth then re-paired it, did an SMC shut-down, cleaned ball, battery points but it still does not feel totally right? Am I missing something?

    hi, i had the same problem.
    i just put my mac into sleepmode
    apple logo left corner --> first option above restart
    then i connected my magic mouse ( holding the button)
    and then it worked
    i hope it is working for you too

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

  • Magic Mouse won't scroll in mail

    MAGIC MOUSE WON'T SCROLL IN MAIL IT WORKS FINE EVERYWHERE ELSE.

    Sorry, i have the same problem, also os x 10.7.3.
    the scroll and swipe still doesn't work after i followed about ur suggestion...
    pls help??
    thanks!

  • Magic mouse won't scroll in os x 10.7.3

    magic mouse won't scroll in os x 10.7.3

    Sorry, i have the same problem, also os x 10.7.3.
    the scroll and swipe still doesn't work after i followed about ur suggestion...
    pls help??
    thanks!

  • Why my Mac won't connect automaticly to Wifi from boot or when waking from sleep?

    Hi!
    I have 2TB Time Capsule with bridged WiFi.
    When I reboot or wake up my MBP from sleeping it won't connect automaticly to my Home WiFi network. I allways need to connect by hand. This problem has been in the Os X Lion and Os X Mountain Lion.
    Any other WiFi networks don't have this problem, only with Time Capsule.
    Time Capsule has 7.6.1 software and also older software's had this exact same problem
    My MBP is:
    2.3GHz Intel Core i5
    8GB 1333 Mhz DDR3
    And the WiFi chip is:
    Card Type:          AirPort Extreme  (0x14E4, 0xD6) 
    Firmware Version:          Broadcom BCM43xx 1.0 (5.106.98.81.20)
    Does anybody else run in to this kind of problem?
    Oh and everything else with WiFi is working normally (Phones, iPad's etc even PC's =) )

    I was having this same issue with a brand new 2012 MacBook Air after updating to Mountain Lion and using an AirPort Extreme. Most times waking from sleep would result in a lockup as the system would continously try to find my network (the WiFi menu would just keep cycling). After going to 10.8.1 it still continued so I started looking at other possibilities. I noticed that the security setting on my AirPort Extreme (current generation) was set to WPA/WPA2. I changed it to WPA2 and the problem so far (2 days in a row) has gone away.

  • Magic mouse won't scroll on snow leopard

    I bought an imac two weeks ago (snow leopard)- and my magic mouse won't scroll! I do not seem to have the USB overdrive installed, I have all the latest software! Help!

    The ball is dirty, they have a history of accumulating dirt and grime on them so that's my best guess. When I used one what worked well was rolling the ball very very vigorously on a white sheet of paper on a hard flat surface. Do this for about 60 seconds then see if that took care of it.
    NOTE: My error I misread and thought you wrote Mighty Mouse. Please disregard.

  • Does anyone know why a magic mouse won't scroll in calendar in mavericks?

    does anyone know why a magic mouse won't scroll in calendar in mavericks?
    It will scroll in a window that has an indicator scroll bar on the right side but not in the new seamless calendar view. The built in trackpad on my mid 2012 macbook pro will scroll.

    or uninstall those mpkgs
    Yes.
    Barry

  • Imac G5 Isight won´t connect automatically to Wireless Network

    My Imac G5 Isight won´t connect automatically to my wireless network.
    Everytime I turn it on, I have to manually select the network on the networks list.
    I checked system preferences, and marked that I wanted to connect automatically, but still no luck.
    It used to work just fine.
    Any ideas?
    I'm using 10.4.5 and a Netgear wgr614v6 router.

    Try deleting your network keychains. Worked for me.

  • First BT keyboard, now BT mouse, won't connect

    Yesterday my Apple BT keyboard wouldn't connect. Flashing green light on kb. Changed batteries, no difference. Deleted pairing. When creating new pairing, it sees the keyboard but can't receive the pairing code. I read the forum here, figured I wasn't alone and that there'd be a fix reported here shortly, and decided to be patient.
    This morning my Apple BT mouse also won't connect. Deleted the existing pairing, but it won't connect to create a new one. Both mouse and keyboard are about 18mths old. It's not batteries or battery contacts - both are in good condition.
    I'm running Apple Bluetooth Software Version:     1.6.0f2 on Mac OS X 10.4.2 (8C46)
    Halp!

    Hi Alan:
    I had a similar problem (once) with my BT keyboard. I tried all the trouble shooting things but it got to the point where it gave me a code but then would not accept it. Here is what I tried (may or may not have 'fixed' the problem. I shut my computer down. I unplugged all USB devices (this is a workaround for a missing BT - not your issue). I walked away for awhile. I restarted, repaired the devices (the keyboard code was accepted, and the problem has not returned).
    As I said, I have no idea why this worked - and I do not believe in magic!
    I do not think both devices would be faulty - although anything is possible.
    Barry

Maybe you are looking for

  • Tuning with functions in the SQL Query

    Hi there, I am trying to tune a query that has functions in the select section. Wondering how to see the results of the explain plan with these functions included. Is there a qs to include them when running the explain plan Thanks Hilton Oracle Datab

  • HELP! MacBook won't turn on.

    Tonight my wife tried using the MacBook. It was incredibly sluggish so she rebooted... Except it never came back on. When you press the power button the screen flashes on for a second and goes dark while playing the startup chime. The hard drive grin

  • ActivIDentity Digital Badge (USB) will not show up in Keychain Access

    I am trying to access my corporate webmail, which requires me to use a USB Digital Badge. However, when I insert the badge, it will not show up in Keychain Access. Consequently, neither Safari nor Firefox can find the credential, causing the page not

  • Conversion of contents of file..Hierarchical file.....

    Hi experts I have a source file which will look like the following ZHD|D0039001|G|CAPG|D|NEEB|20090420093324 ZPD|20090417||B|4191| GSP|_A PCI|1 SCI|0151 DPC|00261|0.0022672942446 SCI|0430 DPC|00043|0.0032362480141 DPC|00109|0.0031630587104 SCI|0105 Z

  • Executing procedures with OUT parameters using Named notation

    I have a procedure with two out parameters (p_errortext and p_returncode) and i want to execute this proc in SQL*plus using named notation(using association operator ' => '). For position based execution i usually declare variables to hold the OUT pa