My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

hi,
my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
Anyone facing the same issue? Thanks.

Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

Similar Messages

HT4972 Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

I think a few have.
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

I cannot get decent reception on my 4s from Sprint. I understand there is a known WiFi issue with the 4s as well as antenna issues. Is this true and is it resoved in the 5 series?

I cannot get decent reception on my 4s from Sprint. I understand there is a known WiFi issue with the 4s as well as antenna issues. Is this true and is it resoved in the 5 series?

I am aware that Sprint has network issues. I have learned that Apple does have reception issues with the 4s. The 5 series has more antenna area and a different protocol. I have owned at least 6 iPhones personally and over 30 as a company. The 4s is junk. Apple's attitude toward customer service is much more of a problem than Sprint's network. Apple sent me your non-answer to my questions instead of anything real. I asked about the iPhone, not about Sprint.

I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version

I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version. Without losing all my bookmarks and saved pass words?

Hello johngervais, the latest firefox version is 26.0 (today 4 Jan 2014).
note that [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp Firefox no longer works with some versions of Windows XP], if you have '''xp with sp2 and above''' you can update to latest version, see : [http://www.mozilla.org/en-US/firefox/26.0/system-requirements/ Firefox 26 System Requirements]
if you are able to update to latest version then see : [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 Common questions after upgrading from Firefox 3.6]
see also : [https://support.mozilla.org/en-US/kb/firefox-just-updated-why-it-asking-me-update-again Firefox just updated - why is it asking me to update again?]
Don't worry you won't losing bookmarks and passwords after update firefox.
thank you

Indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.

indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Magic trackpad only working with a wet finger.

Since I cracked open my box I have not been able to get my magic trackpad to work continously. While I am able to get a bluetooth connection, when I move my finger across it I only sometimes get a response from the mouse. This becomes only slightly more effective if I lick my finger or cleaned the surface of the trackpad with a slightly damp towel. Once the surface and/or finger are completely dry again however, the trackpad returns to it's almost zero response. Is there some film to remove or special cleaning I should be doing when I opened the box?

I just noticed the same thing = I hadn't used it much but just moved up to Lion and started to and it wouldn't work = but when I read your issue I tried it with a wet finger and it worked. I can't even read the serial number on it so can't call for help. Any other suggestions?? I bought it in late April.

My Magic Trackpad lost functionality with my iMac (Lion)

Hi--
I have been using a Magic Trackpad with my iMac (Lion 10.7.5) for over a year. This morning I find that I've lost several functions, including the double-tap + drag to select text, and now the three-finger swipe registers the same as the two-finger swipe. I know the problem is the iMac and not the trackpad itself; I tried unpairing the trackpad with the iMac and pairing it with a Mini (same OS), and all of the functions are working when paired with the Mini.
Having looked for others with similar issues, I've tried the steps of zapping the PRAM, deselecting/selecting the trackpad preferences, and looking for plist preference files that look like they are trackpad related (but didn't recognize any--am I looking in the wrong place?).
FWIW I was having problems with Time Machine just a week or two ago and performed a system software reinstall from Recovery Mode, which fixed the Time Machine issues. But I believe the trackpad was working fine until this morning--at least the click-and-drag selection b/c I use that function daily.
Thanks in advance for any advice.

Okay, so I think I've figured out most of this. Many thanks to jefflogullo, whose post I found my answer on. Resetting everything on Universal Access solved most of my issues with double-tapping. Why on earth did they move it out of trackpad settings?

Magic trackpad not working with mac mini

I have a new Mac mini and I paired a wireless trackpad and magic trackpad. I paired the trackpad with my MBP and it works exactly like the trackpad on my MBP. When I use the trackpad with the mini, I can't get it to "right click" or two finger scroll. For example, if I'm in iTunes, and want to scroll through my library, a two finger scroll on the trackpad just moves the curser, the only way I can move up and down on a page is to use the arrows. I can't get it to give me anything with a right click. When I go to System Prefrences, it only shows "keyboard" and "mouse", but no set up options for the trackpad. And under the mouse settings, it doesn't give me any "secondary" click options. What am I missing?

I had the same problem. Rebooting the computer fixed the issue for me.

Magic Trackpad has become a battery black hole

Why has my Magic Trackpad suddenly start eating batteries like potato chips? I have been using it for well over a year with only needing to change the batteries about every month and a half. I use Sanyo Eneloop1.2v Ni-MH 2,000 mAH batteries. Yesterday I lost Trackpad connectivity because of a low battery condition, swapped them out with fully charged ones then several hours later the same thing happened. Each time was a different set of batteries. I swapped out the keyboard batteries as well and they are doing fine and registering at 100%. Usage is very light. What is going on?

Same thing here. I had a 2008 iMac for many years with a Magic Track pad, got a new 27" iMac in September with a new trackpad. Running Mavericks and it's eating my batteries like crazy. I go through two a week and i'm only on my computer about 4 hours a week at the most. I used to use my Mac much more than i do now and the batteries would last for almost 4 to 6 months. Alkaline in every case. Something is up. I see lots of people with this problem on the discussion boards.

Has anyone with OS X 10.7.5 had issues with corrupt photos?

We are suddenly experiencing an issue with our iMac where photos we have taken recently are now coming up with the image below. They appear fine at first in the finder view but as soon as we open them they turn into the below and then others in the same folder do the same. We copied the files to another computer and it opens the same. Apple Support is having me do an OS reeinstall, but I want to know if others are having the same issue.

Hello Drew,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Magic Trackpad has suddenly stopped working

Bought an iMac and trackpad last August. Everything worked flawlessly.
Upgraded to Lion, and ever since, the trackpad has been slow to connect, although it eventually would. Yes, it is identified as a favorite peripheral.
Today, nothing I do will bring the trackpad to life. Had it going for a couple of minutes, then slept the computer, restarted it later, and nothing. At the time, the battery life in the trackpad showed about 50%.
Tried deleting the trackpad and reconnecting. The trackpad is discovered for a few moments (although I can't use it), and then the connection is lost.
Any ideas?

Try smc and pram reset.

Issue with hostname "localhost" and general CR connectivity issue

Hello,
we installed SAP BOE with the integrated Tomcat 6. We used a Web Tier installation on the same host, but in different paths.
Tomcat was installed under /usr/sap/tomcat/sap_bobj/tomcat and the SAP BOE package under
/usr/sap/XXX/sap-bobj/enterprise_xi40. The host has two IP addresses, a physical address (A) and a logic address (B).
We want to get a setup that uses the logical address whenever possible.
We have issues with Crystal Reports for Enterprise XI4.0.
When CR ist started from the BI launch pad, then CR ist started and tries to connect to "localhost". The hostname "localhost" is communicated from BI launch pad to CR.
For sure, no communication with "localhost" is possible.
When CR is started manually and a connection to the respective Tomcat server is initiated (port 8080, servername B, context /dswsbobje) we get the
error message. please wait, no connection possible at the moment. I already read and applied SAP KB articles 1598906 and 1601997, but the issue is not solved.
1- Where I can make changes so that BI launch pad will communicate hostname B and not "localhost" to start CR?
2- Is there any local log file on the PC to check why CR can not connect, when started manually?
Best regards Bernd

we have installed BO 4.0 and Its working perfectly. we have using webi reports,
As next step recently we have installed Crystal reports for exterprise XI4.0
But we could not connect with BO server. Please guide us on below req..
Server name:
Server Port No :
Server COntext :
System Display Name :
User Name :
Authentication Type :
Thanks
Pari

Having issues with my audio as well as another issue corrosponding to it..

Hello, hopefully I am posting this subject in the appropriate area. I have been having an issue with my laptop.. I've had it for about three years now, its a satellite C655D .... what it does is, when I listen to anything with audio, it freezes and then when I have audio on, through the speakers a lag comes up, sounds like a buzz... & when it freezes, the whole entire computer freezes. I've tried virus scans and I just wiped the whole computer out but its still doing it. It's not as bad as it was before, because when it froze before I wiped my computer out, it froze for a couple of minutes, where as now, it freezes for a second, but thats just for now, it may get worse again. I am not sure whats going on, if its the hard drive, or the driver.. Does anyone know? The warranty on this laptop has expired I cannot afford to fix it... So if its the hard drive, my only choice is to wait till it dies completely. Thanks for reading, God Bless.

Which Satellite C655D? See the label on the bottom.
I just wiped the whole computer out
What could that possibly mean?
Perhaps you restored the hard disk to its original out-of-the-box contents using Toshiba recovery media?
-Jerry

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Issue with empty value of LOV of first row after clicking on add row button

JDeveloper 11.1.14
I have a page with table-form layout.
In the form I have two detail tables on the same page (tabbed).
I have an issue with using model-choicelist LOV's in the detail tables.
I am able to add a new row in the detail table, select a value from the model-choiceList LOV (which is required) and save the new row.
After adding another row in this table the value of the model-choiceList LOV in the previous row is suddenly empty on the screen. It is not empty in the database,
I have checked it in the datbase. Only the value of the LOV of the first row on the page is being cleared after clicking on the add row button.
After saving the new row I get the following error on the screen:
Error: a selection is required. --> first row
Does anyone have a suggestion how to solve this issue?

After adding another row in this table the value of the model-choiceList LOV in the previous row is suddenly empty on the screen. It is not empty in the database, Is the complete LOV blank or only the selected value .. can you try putting autoSubmit=true in the LOV and try ? Also check if you have any partialTriggers on the LOV from the add button ?

My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

Similar Messages

Maybe you are looking for