My MagSafe Charger / Power Supply is not working

I am using mid 2009 13" MacBook Pro with 85W MagSafe  . My operating system is Lion 10.7.4.
I heard a "click" coming from the direction of where my charger and just before and now its not working.
The light is not coming on the charger itself
No power is shown be coming into the computer on the Desktop toolbar either, nor does my computer that there's a charger plugged in.
I have tried the charger in a number of the different sockets around the apartment and still no joy
The transformer "block" is cold
Could this be a s simple as a blown fuse in the plug or something else altogether?
I need to fix this asap. No power = no computer. All help much appreciated.

I've copy and paste info from under AC. The MagSafe charger is physically connected, the report says that is not connected and not charging.
Any tips on where I can get cheap new Apple charger (60W MagSafe)?  Thanks to you
both.
Battery Information:
  Model Information:
  Serial Number:          9G9460Q108VNC
  Manufacturer:          DP
  Device Name:          bq20z451
  Pack Lot Code:          0
  PCB Lot Code:          0
  Firmware Version:          3
  Hardware Revision:          2
  Cell Revision:          100
  Charge Information:
  Charge Remaining (mAh):          1669
  Fully Charged:          No
  Charging:          No
  Full Charge Capacity (mAh):          4936
  Health Information:
  Cycle Count:          507
  Condition:          Normal
  Battery Installed:          Yes
  Amperage (mA):          -2244
  Voltage (mV):          10881
System Power Settings:
  AC Power:
  System Sleep Timer (Minutes):          180
  Disk Sleep Timer (Minutes):          0
  Display Sleep Timer (Minutes):          15
  Wake on AC Change:          No
  Wake on Clamshell Open:          Yes
  Wake on LAN:          Yes
  Display Sleep Uses Dim:          Yes
  PrioritizeNetworkReachabilityOverSleep:          0
  RestartAfterKernelPanic:          157680000
  Battery Power:
  System Sleep Timer (Minutes):          15
  Disk Sleep Timer (Minutes):          10
  Display Sleep Timer (Minutes):          3
  Wake on AC Change:          No
  Wake on Clamshell Open:          Yes
  Current Power Source:          Yes
  Display Sleep Uses Dim:          Yes
  Reduce Brightness:          No
  RestartAfterKernelPanic:          157680000
Hardware Configuration:
  UPS Installed:          No
AC Charger Information:
  Connected:          No
  Charging:          No

Similar Messages

  • Satellite L650-1P4 - AC power supply is not working

    I have a problem with my computer:
    When I plug in the AC adapter to the computer, the computer did not work and the battery is no longer supported but computer works with battery and the charger works on another pc.
    +Message was edited: posting has been translated+

    I have a problem with my computer:
    When I plug in the AC adapter to the computer, the computer did not work and the battery is no longer supported but computer works with battery and the charger works on another pc.

  • Power Supply is not working in Germany

    Hi, I bought long time ago a notebook in USA. When I was back in Germany the notebook didn't charged any more. I asked for support, because of the guarantee, but they said there guarantee is for supplies only six month. I forgot the notebook in the cellar. Now I'm asking myself, if the is a possibility to get a "new" notebook running. I just used the notebook 2 hours. Thanks and regardsMosesKama P.S: I wouldn't recommend the service in Germany to somebody. I wrote them before months and I'm still waiting for a feedback.  

    MosesKama wrote:
    Do you know about any possiblities to get run a notebook that a bought in the Staates, but like to use ist in  Germany.The notebook is not charging. ThanksDid you check with HP support if the chargers are of different voltages standards which may require different chargers?

  • HT1547 My mac book pro is 3 yrs old and today while watching something on it, it got power off suddenly. And power button is not working, left side round button to battery is not working but when I plugg in to charge it, then this round button shows 4 gre

    I am having MacBook Pro 3 yrs old and today while I was watching some movie on it suddenly it got power off and when I am trying to start it, it's power button is not working even the round button on external left side is not showing battery lights. But when I connect it to chrger then Charger only gives green light and even the external round button only shown 4 green lights (if charger connected). I don't know what to do now

    Sounds like you need a #1SMC Reset
    1. SMC reset
    >>Instructions to reset SMC
    Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
    Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc.  If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
    Will not hurt the machine resetting if it's not broken.
    Other related hardware problems (optional):
    Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
    Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
    Apple: Laptop won't power up   Apple: Computer won't power up  Troubleshooting optical drive
    Magsafe problems   Magsafe problems more

  • My power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like it usually does but it's not turning on

    my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on

    Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
    If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
    Good luck Friend.

  • Is there an available car charger/ power supply for the iPad that works?

    Is there an iPad car charger/ power supply available?

    There are many of them: http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/power

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Is there anyway to power off an I-phone 4s if the power button is not working?

    Is there anyway to power off the phone if the power button is not working?

    Assistive Touch. Tap Settings App > General > Accessibility > Assistive Touch > ON > at bottom of screen tap button > Device > press and hold Lock Screen icon > when slide to power off appears > slide it. To turn iPhone ON connect to Power Source with USB cable, charger or USB port of computer.
    All iPhone 4S have full Warranty Coverage. Make Genius Reservation and take iPhone to Apple for resolution.

  • How can i restart my phone if the power button is not working?

    My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
    Also, I use the on-screen assistance icon but it does not have a power off option.

    demeece wrote:
    My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
    Also, I use the on-screen assistance icon but it does not have a power off option.
    That's correct.  Because how would you turn it back on again if the screen was off and your power button was on the screen?
    Yo need to fix the button, or try letting the iPhone die out completely, then connect it to power and after it's charged for a while, see what happens when you press the Home button.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • HT201263 my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

    my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

    After being connected to a charging source overnight try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Does anybody know if it is ok to use a standard travel adaptor with macbook magsafe 85w power supply?

    I am moving to New Zealand and want to take my macbook pro with me.
    I have a Magsafe 85w power supply.
    I am aware of the apple travel kit.
    Do i need to purchase this, or is a standard travel adaptor safe?
    Do i need a lower watt magsafe power supply?
    Should i get a grounded 3 prong adaptor rather than the ungrounded 2 prong adaptor that comes with the apple travel kit? Particularly with long term use.
    Thank you all!

    The item that is crucial is the connector to the AC outlet.  The power adapter will work from 100 to 240 volts.
    Ciao.
    A grounded plug is always preferable.
    Message was edited by: OGELTHORPE

  • Dead B&W G3 ? Only the power supply seems to work...

    Hi Everyone...
    Here's my setup:
    Powermac G3 B&W Rev.B
    Processor: Powerlogix G3 750FX (1Ghz)
    Ram: 1GB (4x256Mb)
    OS 10.4.9 (latest OS supported by Powerlogix)
    HD: IBM desktar 120MB
    DVD-Rom: Samsung DVD-/+R
    PCI 66Mhz -> Radeon 9200
    PCI 33MHZ -> M-Audio 2496 Audiophile Audio Card
    PCI 33MHZ -> Sonnet Tango 2.0 (USB/FW)
    PCI 33MHZ -> Sonnet Tempo ATA133 (my main drive uses this card)
    The B&W G3 has been one of my hobby machine for a year (I mostly use it as a jukebox to listen to AIFF disc images in PCM / uncompressed sound).
    Anyway... it died on Saturday night... just after upgrading to a Sonnet Tempo ATA 133 card...
    As I've been a Mac user for a long time (and I've been there before with a Gossamer MB in my beige G3 which died out of the blue once), I completely did empty the motherboard... adding one element at a time to isolate the issue but the fact is that:
    a) no startup sound
    b) black screen (nothing comes out of the Radeon 9200)
    c) only the power supply seems to work
    d) even when plugging the HD into the MB IDE socket, the HD doesn't even activate itself (no boot).
    Of course, I went through the CUDA switch, tried to reset the PRAM, checked the jumpers on the HD (master position)...
    I also tried to boot the system off the OSX Tiger Install DVD but nothing...
    I have a feeling that my MB may be DOA.
    What do you think ?
    If this is the case, since I'm using a Tempo ATA 133 PCI Card, does it make any difference to replace it with either a REV.A or B MB ?
    Thanks for your help,
    Pierre André.
    Message was edited by: pierreandre90403

    Hi Grant,
    I posted the following on another thread, but I haven't gotten any response.
    I'm having a similar problem with a B&W 350 MHz (rev 1 I think). I get the start up tone and nothing appears on the monitor. Not sure if the machine is actually booting or not.
    I am trying to repair this machine for a friend. They had been having a problem with the machine booting into a blue screen. I suspected a corrupt directory, so I ran Disk Utility (from another machine) and also Disk Warrior. Both Disk Utility's Disk Repair feature and Disk Warrior found problems. Disk Warrior was able to successfully rebuild the directory.
    I had removed the hard drive from the machine and put it in an external casing in order to run Disk Repair and Disk Warrior. Upon putting the hard drive back into the B&W and booting the machine, I was able to successfully boot the machine into Tiger. I tested the machine for a few minutes and it seemed to work fine.
    Next, I ran software update and installed a new version of Safari and then after the required re-boot, tried to repair disk permissions. During the repair of disk permissions, the machine froze up completely. The clock stopped ticking and there was no mouse or keyboard response. I tried using the re-boot button on the front of the machine, but the machine would not fully re-boot. I get a boot tone, but no video.
    I tried re-setting the CUDA chip by pressing the re-set button on the logic board, but to no avail.
    Finally, I did take the battery out and had it tested at Radio Shack. The battery is showing a good 3.6 volts.
    I have a second B&W (300 MHz) that is basically doing the same thing. Do you know what could be causing the lack of video signal?
    Cheers,
    Thomas
    PS: I tried re-setting the logic board as described in another post (unplugged machine, pressed power button, removed battery, waited 10 minutes). I have tried the CUDA reset several times, but I only press the button for a second, not 15 seconds. I have re-seated the RAM. I have removed all the RAM and tested each. Nothing seems to work.

  • Ipad New Generation - power switch on , not working.

    i am playing the games in ipad and idle for  2mins.The screen becomes black, thought it was just an automatic lock but i could not turn it on. It was 50% charged. The power switch is not working. what could be the problem?

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • T440p Fingerprin​t power-on is not working

    Hi , i just recieved my new T440p ,  Fingerprint @ power-on is not working although all config. is done typically in lenovo fingerprint manager pro & fingerprint security settings in the BIOS , i start my laptop it goes through windows normal startup & logon without any request for fingerprint .
    Solved!
    Go to Solution.

    Dear Ahmad
    Welcome in lenovo community
    Have you tried to first to enroll your fingers first , an application called Lenovo Think Vantage should be installed .
    Do you have this application installed ?
    Also you need to check the device manager , it's better to send us a screen shot of it .
    Let us know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Intercompany invoice not getting created in third party processing

    Dear Gurus ! I am facing a problem in creating the intercompany invoice in case of third party order processing. In our organisation , for any type of sale two billing documents are creared : 1) Commercial Invoice under the co. code for which sales o

  • Edi inbound process

    hi all incoming messages 1. incoming message for ex. (ordrsp) is recieved and stored in a catalog on sap server. 2. In transaction we20 i have for a vendor messagetype ordrsp and processcode ORDR. Processing by func module = trigger immediately. Ques

  • Fitbit Activity to Health App Successfully Working

    I was able to get my Fitbit activity (total steps, total floors climbed, total distance walked, total calories burned, sleep, and weight). You will need to install the Jawbone Up app (purple icon) and the IFTTT app. Create accounts in both apps. Log

  • Simple transformation DOCTYPE

    hello, anybody knows how to get the get the DOCTYPE statement in my XML file which is generated via simple transformation. my simple transformation program looks like: <?sap.transform simple?> <tt:transform xmlns:tt="http://www.sap.com/transformation

  • Business Objects Enterprise 4.0 SP9 - Where is the crystalreportviewers folder

    I have installed Business Objects Enterprise 4.0 SP9 for unmanaged report testing.  I am setting up a small jsp to test connectivity and was setting up the web.xml file.  But I am unable to find the location of the srystalreportviewers folder.  If ve