My mail account on ipad 2 no longer works..seems frozen and the settings button is also not working
My I pad 2 was working great until tonight when I went to get mail...nothing..it was like it wasn't even searching, frozen..so I went to settings and that too was not working when I checked on mail, contacts..nothing would hightlight or work..all the rest of the settings were responsive.
Try resetting the iPad. Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears and then let go of the buttons. Ignore the red slider bar.
You can try this as well if the reset doesn't work. Close all apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Similar Messages
-
my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
I dropped my phone into water for a split second and everything works fine except for the home button... I really don't have the money for a new iphone right now.. Please tell me some tricks to get it working again... Thank you
put the phone in an open bowl of rice on a heated surfade such as a raduator
for 48hours -
My i pad screen is frozen and the on/off botton is not working..help
My Ipad is frozen, ..i cant turn it off..please help
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
I do not know what to do or how I should go about fixing this.
Did all this happen at once, or over time? Have you plugged the device into a charger for at least a half an hour? After that amount of time, you can try a reset, hold the sleep/wake and home button together until you see the Apple logo and then release. The phone should reboot. If it does not, then make an appointment with the Genius Bar at Apple. I would say the phone is broken.
-
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?
No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
Good luck. -
Good day,
I get a grayish screen when I access internet via my Ipad. The touch screen is also not working but only with internet. How do I fix that?
thank you
mélanieI have the same problem! Can anyone help us? Thanks!!
-
I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help. can anybody help me with my problem? thanks!
When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
Also have you tried all possible troubleshooting steps found over here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
I am actually using a free trial of photoshop cc and the contact sheet option does not work-?
i am actually using a free trial of photoshop cc and the contact sheet option does not work...
Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini -
Updated to 10.4 and the New Purchased feature is not working. Anyone else having this problem?
I did originally, but it fixed itself after a few minutes.
-
CS3 asked serial number suddenly and the box-set serial number not work.
CS3 asked serial number suddenly, and the box-set serial number not work.
Elton Adobe which web browser are you utilizing? Are you signed into http://www.adobe.com/ when you attempt to contact our support team directly at Contact Customer Care.
I would recommend utilizing a different web browser and contacting our support team directly as suggested by KGlad in message #6. -
I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP
Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore Firmware with iTunes on computer. See if fixed. If not, all iPhone 4S have Warranty, make Genius reservation and take iPhone to Apple for resolution.
-
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
I have an ipod touch 3rd generation and the whole touch screen is not working.
I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.
If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.
Maybe you are looking for
-
How to turn off default attribute "Validity" in a web-report
Hi Experts, We are using 0ORGUNIT with time-dependent hierarchy. This hierarchy is included in most of our reports. When we run a report with 0ORGUNIT hierarchy an attribute "Validity" is always shown next to the hierarchy. We can manually remove thi
-
Any time I try to down load something from Torrents an ad for MacKeeper pops up. It then doesn't let me down load it to my computer so I have neither MacKeeper nor anything from Torrents. It will not let me access the the client Transmission. How do
-
in my project(JSP) ,i want to hide the url(after Login url should not be visible) , please give the code for it
-
Synch to iPad from Photoshop Album
When I synch photos to iPad using Photoshop Album not all my photos synch. They were all taken with teh same camera & are the same size. I thought maybe the ones I edited were not synching, but that's not so. I have 63 photos in an album adn only 34
-
Can i get updated fields in a trigger
Hi All i worte a trigger on a table which will run when any value gets updated. Now my aim is i just want to retrive the whole row in the trigger for which a field/fields gets updated.Can i do this if so please guide me in this Thanks & Regards rohit