My Mail is not working properly after installing Lion
I just installed Lion and my mail is not working. It keeps asking me for the password and says it can not go online. All my mail folders have disapeard and with them my saved emails! Also the Back to Mac is not able to take my password either.
Ouch...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.
Similar Messages
-
HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7
After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing gamesThis board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help. -
Why Mail does not work properly after updated to Mountain Lion?
I updated to ML two days ago and my Mail is not working. I can read but cannot reply because there is no cursor. Restarted a few times, no change. Anybody has the same problem??
RudhI forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML. -
I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,
Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari. -
Iphoto not working properly after installing snow leopard...
the two main problems are...
1) when editing in full frame, if I zoom in on the photo and try to move around with a two finger scroll, there is a big delay between me moving to where I want to be and the photo actually getting there.
2) when editing with "adjust," there is a delay when changing anything (such as highlights and shadows).
everything was perfect and happened in real time prior to installing snow leopard. when I called apple, I was told it was probably because iphoto is not 64-bit yet (would have been nice to have known that this would be an issue prior to the install). he said that if everything on my computer was added after snow leopard, I would probably be fine.
can anybody give me some advice on what to do here? I wouldn't mind going back to leopard if I can do that without losing everything, but am very open to ideas if anyone here has anything on this.
side note...safari seems to be having issues as well. takes a long time to load pages and sometimes won't be able to open them without closing out and reopening it a time or two. wasn't a problem before either.
thank you,
seanI am having a similar(?) but perhaps distinct problem. My wife and I have separate user accounts on our MacBook. We were sharing the same photo library under Leopard with no problems whatsoever. Now, after installing SL, there is a strange situation. If I am in my account, and I import images from a camera into iPhoto, I am able to view and edit with no problems. However, when my wife launches iPhoto, she can see the event and the thumbnails in the event, but when she tries to edit the picture or even preview in iPhoto (clicking the space bar), the picture becomes a blank dark screen. If you hit add face while on the blank screen, the program can pick out the faces, but the picture is still blank.
If I try to import photos into the library when she is using her user account, the reverse applies to me. That is, I can only preview and edit pictures added under my account, and not hers.
I never had this problem with Leopard or with iPhoto '09 under Leopard. Any ideas what might be going on? I would think to go the genius bar, but I am not sure what they woudl be able to do about it. Thanks in advance. -
My volume buttons on my mbp are not working. After Installing Lion
My volume buttons on my keyboard are not resonding, the icon appears on screen but it is ghosted and I can not use them. Also the volume control at the top of the screen is not working either.
Lion Mac OS X Communities
Notebooks
Keep applications from stealing focus when opening in OS X
Five quick Lion tips to make the transition easier -
My HP laptop not working properly after installing window 7ultimate 64 bit
This laptop is provided by UP Govt (INDIA). i installed windows ultimate 64 bit,2 days ago and installed all the drivers. But their is two drivers which is giving errors. these are
1)PCI Device- ERROR IS---The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
2)Ethernet Controller- ERROR IS--- The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
My main problem is that laptop is hangig too much continously. i dont know what is the exact reason and what should i do..Its not heating so their is null chances of heating effect.. I wants to get rid of this hanging problem.Pls provide me link for to download the genuine drivers and solution for this hanging problem..As it was not hangig earlier on Windows 7 home basic (provided by Hp)
This question was solved.
View Solution.Hi:
Here are the links to the drivers you need...
PCI\VEN_10EC&DEV_5209:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8136:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&dlc=en&lc=en...
The only suggestion I can offer regarding the notebook not running so good is to download and install the amd chipset drivers from the link below and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 -
Media Manager not working properly after installing update
I have an 8110 and upgraded to desktop ver. 5.0. Since that time, Media Manager does not recognize the 8110 put pictures on computer.
What do I need to do to correct this?
Thanks.
Solved!
Go to Solution.There is no need in Media Manager.
You can transfer files directly:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=... -
Music not working properly after installing iOS7
What problem do I have?
1. Some tracks are not downloading
2. Some artwork is missing
What have I tried to do to fix the issue? (in no particular order)
1. Deleted all the music > sync > recheck all the music > resync
2. Checked and unchecked "Show All Music' in Settings
3. Logged out off iTunes and iCloud and logged back in.
I can see from some forum questions that this appears to be a common problem but can't find a solution.
Any ideas?
Thank you.Uninstall check "Remove Preferences"
Reinstall. Make sure you have your serial numbers. If you have an upgrade, get the serial of the product you upgraded from.
If there are any questions, ask me before you go with the uninstall.
Gene -
Aluminum Wireless Keyboard not working properly after Firmware update 1.1
Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve -
ITunes / iPhone not working properly after newest update...
iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Mail is not working properly (cannot replay), and skype cannot be answered
Did the verification, repair and installation disk of Mac. Why mail is not working properly (cannot replay), and skype cannot be answered?
I most often do not restart my new MBPro .... 10.9.5 ..... but happened to a day or so ago, and it immediately began to block / problem with email .... I waited to see if it sorted out, but no .....
I get he server “p06-imap.mail.me.com” cannot be contacted on port 993 ..... then deselected SSL and that did not help, so went back and selected it again .... and again not working .....
I can see my stuff "online" but I do not want to do it that way EVER .....
your "deselect mail" in ICloud preferences .... did nothing good for me .... any other thoughts Linc ?? in fact, some hundreds of in and sent emails did not show up .... I'm hoping they are going to when this gets fixed .... but hey, ..... right now I'm NOT in business ....
thanks -
My trackpad is not working properly since installing the upgrade. What should I do?
My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?
i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type
-
My Iphoto does not work properly after downloading Maverick. How can I fix it ?
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
Camera not working properly after ios7 upgrade in iphone 4s
Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problemHave you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!
Maybe you are looking for
-
Hi, I have problem with pdf format in reports6i, i'm usually using pdf in my reports, but i have problem with it. When I print a reports in PDF format it's always shown my old data that i have open previously, this is cause by the cache on Browser. I
-
i'm trying to pause and/or mute a sound, with little success. i've found out that something like 'sound.play(pausePosition)' might fail on sound-clips with low sampling-rate. however when i try to mute a sound with a 48000Khz sampling rate it simply
-
I have an iPhone 4 and it's running iOS 5.0.1. I don't know what disk it's talking about, thus I have no way of searching for it.
-
Uninstalling old CS2 after installing CS5.5 on MAC
Can you tell me if it is safe to uninstall an old version of CS2 after successfuly installing cs5.5 or did the cs5.5 build off of my CS2?
-
Trying to use olite35.jar with JDK1.1.8
Hi, I'm using the olite35.jar in a piece of code that compiles but won't run under JDK1.1.8 When I attempt to run the code I get the following: Exception occurred during event dispatching: java.lang.UnsatisfiedLinkError: no oljdbc35 in shared library