My mail sending folder won't send

The sending file just keeps spinning but won't send mail. I checked with my email provider and made sure my preferences are correct.

Have you checked and if required set up a password for the SMTP server within Mail?

Similar Messages

  • Mail Sender Adapter - read from public folder.

    Hello Experts.
    I have a scenario, where I need to read an incoming mail from a public folder, and after mapping the attachment (which is a csv) I need to put the result as a file in a shared folder.
    right now the problem is, I am not sure how to access the public folder.
    should I use one of the exchange users, and try to access the public folder?
    what should I be writing in the URL parameter in the mail sender adapter ? (imap://server/???/public folder ?)
    Also - in case I will want to switch the location of the mail to a private foler inside of the user mailbox - what is the URL parameter in that case?
    Anyone ever did something like this and can help?
    Thanks,
    Imanuel Rahamim.

    Hi Imanuel,
    do u mean u want to pick the mail which contains an attachement from a specified folder instead of inbox?
    u can configure the URL like imap://host:port/path/PublicFolder.
    after PI received the mail. we can use PayloadSwapBean to get the attachement payload and do following message mapping.
    ur question: Also - in case I will want to switch the location of the mail to a private foler inside of the user mailbox - what is the URL parameter in that case?
    do u mean u want to pick the mail from a specified mail account? if like this, create an user for the interface only. then configure the UserName/Password in the channel.
    Regards,
    Kevin Song

  • Mail Sender Adapter for Exchange 2007 IMAPS account

    Hi everybody,
    I have the following todo:
    I configured a Mail Sender Adapter that is supposed to fetch mails from an IMAP account.
    The mails contain text files with data to be processed by XI 3.0 SP 22.
    The mail server is Exchange 2007 and requires IMAPS. IMAP is not enough. I read the notes
    - 893590 - XI 3.0 Mail sender adapter with IMAP or POP with SSL problem
    - 856599 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 Mail Adapter
    and configured the sender apapter as follows:
    URL:                     imaps://<ip address>/owa
    Authentication method:     Plain
    User:                    <domain>\<user>
    Password:                       topsecret
    Poll Interval: 5
    The first challenge is to setup the adapter with SSL. To do so, I added the Exchange server's
    root SSL certificate in the default truststore service-ssl via the KeyStorage service.
    This is necessary, as far as I know, to successfully validate the Exchange server's trusted
    certifacate which is being transfered to XI during SSL handshake.
    Since the communication channel in RWB is in status error with following message:
    mail client job stopped completly
    exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 001I NO owa doesn't exist.
    mail client job scheduled,
    I do not know how to setup SSL for IMAPS. I successfully tested a PING to the Exchange server.
    Are there already experiences with Exchange 2007?
    What I have to do to fetch mails from an Exchange 2007 IMAPS folder/account with a Mail Sender Adapter?
    Kind regards,
    Andreas

    Hi,
    It should be imap and not imaps.
    You can try imap://xxx.xxx.de:993/Inbox
    Make sure that port 993 is correct. If you have doubt, then you may try 143 which is default port instead of 993 in the above url.
    regards,
    ganesh.

  • Mail send command inoperable

    Mail send command after composing message stopped working. Application opens and downloads messages w/o difficulty, sends automated messages from iCal but won't send when the "send" button is clicked. I am running MailTags but that is not something new. Works fine w/ same version on my laptop and MacMini.....
    Very strange. Any ideas?

    This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
    Resolving Disk, Permission, and Cache Corruption
    It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Click Maintenance. In the Reset section, check LaunchServices database.
    4. You may uncheck any other pre-checked options if you wish.
    5. Click the Execute button.
    6. Restart the computer.
    7. If the problem persists, try again checking the Links between documents and applications option in step 3 instead.

  • Mail sends itself.

    This is something new.  My mail sends itself, multiple times, before I've finished writing.  What's the deal? 
    Thank you.

    What does “I have 4 x Outbox.mbox” mean? Where is each of them? There is no way you could have more than one Outbox.mbox in ~/Library/Mail/Mailboxes/...
    Anyway, this problem in Mail is caused by some index corruption (which in turn might be caused by some filesystem corruption) that makes messages to randomly appear in a mailbox different from where they’re supposed to be. If that mailbox happens to be Outbox, Mail thinks they’re waiting to be sent and dutifully proceeds to try to send them.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
    1. Quit Mail if it’s running.
    2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
    3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
    4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

  • HelpMac mail sends emails prematurely  while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!

    Help. Mac mail sends myemails prematurely  while I'm still composing..sometimes it sends 4-5 email versions in various states of completion. I've got clients asking what happened, because they only get a partial email..its becoming a serious problem. Help!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Mail sends 2 emails  at once when I only have one address for receiver??

    Why does mail send to my friends old address even though I deleted it from the address book and it is not in the to fioelr of the email??
    This is crazy!
    Mark

    You can keep the original ID for iTunes, iTunes in the Cloud and iTunes Match, and use a different ID for iCloud for email, calendar, contacts and bookmarks syncing and PhotoStream.
    In iTunesStore>Account you can change the email address associated with the login ID if you with - the actual login doesn't have to be a functioning email address.
    This means that iTunes will have a different login to iCloud, but Keychain will take care of this anyway so your won't need to remember which one to use. It's better security to have your iTunes login different from your easily discoverable email address, given the number of complaints about iTunes accounts being hacked.

  • Status of the mail sending option using SO_NEW_DOCUMENT_ATT_SEND_API1

    Hi experts,
    I m using SO_NEW_DOCUMENT_ATT_SEND_API1 function moduel for sending mails to dealers. That is, whenver i execute a Z transaction, the customer invoice details are getting displayed in report output. At the same time, the same output data is sent as mail to the respective dealers.
    Now teh user is asking whether there is any possiblity for the end users to have a proof of the mail which is being sent from the Z transaction. If the mail is sent, the end user who executes the Z transaction (mail sending transaction) should have that mail in his/her SENT ITEMS. If the mail not reaches the dealer, then the user must identify the mail bounce identification.
    Pls tell me how to achve the same..
    Regards,
    Shanthi

    Hi,
    Yes it is possible..
    Just pass 'X' to the exporting parameter 'put_in_outbox'. The user can check the send mail in 'sost'. All the details of the mail will be there. This will be the proof that the mail was sent.
    Reg the 2nd part of your query, if the mail is not delivered to any reciepent or to particular recipient, the details will be there in the SAP outbox, that also you can see through transaction 'sost'.
    Thanks & Regards
    Rocky

  • Mail Send Functionality using SO_NEW_DOCUMENT_ATT_SEND_API1

    hi,
    i m using Fn Module "SO_NEW_DOCUMENT_ATT_SEND_API1" to send email with attachment.
    I have written  a program which will fetch data in excel format . this excel should be sent as attachment to specified receiver. however i m having difficulties adding attachment to function module.
    I specified under parameter "contents_bin" but its giving some error message related wth structure.
    I chkd SDN and wasnt able to find any resolution yet.
    Any suggestion or idea which can be useful on this.
    Thanks.

    REPORT  zsendemail                    .
    PARAMETERS: psubject(40) type c default  'Hello',
                p_email(40)   type c default 'write email address' .
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Perform populate_message_table.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    PERFORM send_email_message.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    perform initiate_mail_execute_program.
    *&      Form  POPULATE_MESSAGE_TABLE
          Adds text to email text table
    form populate_message_table.
      Append 'Email line 1' to it_message.
      Append 'Email line 2' to it_message.
      Append 'Email line 3' to it_message.
      Append 'Email line 4' to it_message.
    endform.                    " POPULATE_MESSAGE_TABLE
    *&      Form  SEND_EMAIL_MESSAGE
          Send email message
    form send_email_message.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = psubject.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Add the recipients email address
      clear it_receivers.
      refresh it_receivers.
      it_receivers-receiver = p_email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    endform.                    " SEND_EMAIL_MESSAGE
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = 'X'
                        and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM

  • I need an e-mail sending to my macbook, it appears to download but is never in my inbox. It does got to my iphone.  It isn't in trash.  Can anyone help ?

    I need an e-mail sending to my macbook, it appears to download but is never in my inbox. It does got to my iphone.  It isn't in trash.  Can anyone help ?

    I get those all the time. Most annoying. I usually ignore them or mark them as spam.

  • Send E-mail Send E-mail question

    Hi,
    Im trying out the Developers Toolbox and am trying to figure out if its right for me, and have very basic - beginning MySQL and php skills.
    The tutorial at http://help.adobe.com/en_US/Dreamweaver/9.0_ADDT/help.html?content=ch12_send_email_01.htm l is rather sketchy, when I follow the tutorial on that page:
    "The Send E-mail trigger allows the site developer to automatically send an e-mail when a form is submitted. It is an AFTER trigger, and it can be executed after insert/update/delete/custom transactions.
    This trigger is accessible from the Application panel, Server Behaviors > + > Developer Toolbox > Send E-mail > Send E-mail."
    well, when I try that, I get an error on the page which says:
    "There are no insert, update, custom or login or delete transactions on page. Please insert an appropriate transaction first."
    OK I am assuming that I need some kind of an html form open and on a page, however where do I start? Its as if the tutorials left out a huge chunk of the instructions. I realize I am no expert but if someone was buying the toolbox for the first time how would one know where to start? Do I need to create a new database table first? What kind of table? Can it be a table that is part of the site database for the shopping cart database that I already have linked to the store? Or does it need to be a seperate - database, table? Or just a php page with the form in it? Or does the form page need to be .html?
    Or is the toolkit only for advanced developers with advanced php and MySQL skills and should I not even bother buying it?
    Anyway can someone please give me a hint?
    All I am trying to do is construct a simple email form for my web site which I have created in Dreamweaver and I need a php script to process the data inserted into the form and send it off to the mail server to forward to the webmaster's email address. I have the form created and brought up the form page, but then the Server Behaviors > + > Developer Toolbox > Send E-mail > Send E-mail. Tab is not accessible, and I am assuming that it wont be unless I have a .php file open, so I dont have a clue as to where to start.
    So Ive got 27 days left to determine if its worth buying the toolbox, if I cant figure it out by then then I guess Ill buy some easier to use extension or stand alone to create my email form and other scripts.

    Hi DBS,
    just some thoughts:
    So Ive got 27 days left to determine if its worth buying the toolbox, if I cant figure it out by then then I guess Ill buy some easier to use extension or stand alone to create my email form and other scripts
    honestly said: if sending form data via email is about all you want to achieve, buying ADDT or even trying to learn it would be overkill, as it comes with heaps of features which you´ll probably never need -- in this case investing in a stand alone form-to-email script seems a better solution.
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • How can i read only .txt file and skip other files in Mail Sender Adapter ?

    Hi Friends ,
                       <b> I am working on scenario like , I have to read an mail attachement and send the data to R3.</b>
                        It is working fine if only the .txt file comes.
                      <b>Some times ,html files also coming along with that .txt files. That time my Mail adapter fails to read the .txt file.</b>
                       I am using PayLoadSwap Bean and MessageTransformBean to swap and send the attachment as payload .
                         <b>Michal as told to write the Adapter module to skip the files .But i am not ware of the adapter moduel . If any blogs is there for this kind of scenarios please give me the link.</b>
                           Otherwise , please tell me how to write adapter module for Mail  Sender Adapter?
                      How to download the following
                        newest patch of XI ADAPTER FRAMEWORK CORE 3.0
    from SAP Service Marketplace. Open the file with WinZip and extract the following
    SDAs:
    &#61589;&#61472;aii_af_lib.sda, aii_af_svc.sda
    &#61589;&#61472;aii_af_cpa_svc.sda
                        I have searche in servive market place .But i couldn't find that . Can you please provide me the link to download the above .
                      If any other suggestions other than this please let me know.
    Regards.,
    V.Rangarajan

    =P
    Dude, netiquette. Messages like "i need this now! Do it!" are really offensive and no one here is being payed to answer anyone's questions. We're here because we like to contribute to the community.
    Anyway, in your case, just perform some search on how you could filter the files that are attached to the message. The sample module is just an example, you'll have to implement your own. Tips would be to query the filename of the attachments (or maybe content type) and for the ones which are not text, remove them.
    Regards,
    Henrique.

  • Mail Sender adapter issue in PO7.4

    Hello Experts,
    We are migrating from PI7.0 to PO7.4, where in we are struck up with an issue of Mail Sender Interface.
    Here we have a scenario of Mail to Proxy where we are processing attachment(CSV file). But here when I we run the interface mail body is being processed not the attachment. Also could nt see the Payload as when I click on the Attachment payload a pop up is coming and closing automatically.
    Can someone please suggest where it went wrong as this is working in existing PI7.0 version.
    Thanks.
    VR

    Hi VR
    Have you tried swapping by Payload name?
    Please try it out with the following configuration, and remove any extra lines - there are duplicate key names and values in your configuration.
    You should be able to see the successfully swap by payload name in the audit log as shown below.
    Rgds
    Eng Swee

  • Mail Sender Adapter - Attachment Handling

    Hello,
    I 'm using XI 3.0 SP 14.
    I have problems with my Mail-Sender-Adapter.
    The mails, I fetch, have an xml-attachment which
    represents an IDOC-structure (ORDERS.ORDERS05).
    I want to sent this attachment as payload to an SAP-System.
    The problem is now, that I have 2 Payloads (SXMB_MONI).
    One for the normal email-body and one for my original
    xml-attachment. See below:
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MailMessage</SAP:Name>
      <SAP:Description>mail message</SAP:Description>
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MailAttachment-1</SAP:Name>
      <SAP:Description>mail attachment</SAP:Description>
      <SAP:Type>ApplicationAttachment</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
    The XI Runtime Workbench (SXMB_MONI) takes (in my case)
    the wrong one (email-body-attachment) and gives me
    an parsing error. (Error occurs at my IDOC-Receiver-Adapter)
    Now my question:
    Can I remove the email-body-attachment, so that
    the further processing works with my xml-attachment?
    Or how can I resolve my problem.
    best regards
    Marcel Reichert

    Hi Marcel,
    use the PayloadSwapBean module to get the attachment as main payload.
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
    As parameters use:
    swap.keyName = payload-name
    swap.keyValue = MailAttachment-1
    Regards
    Stefan

  • MAIL Sender adapter going in to error

    Hello Experts ,
    We have configured one mail sender adpater with a custom module to read the attachements in the email message. This was working fine before.
    We recently had a restart of the PI servers. After that the channel is going in to error. The first error as per NWA logs is :
    failed to call the adapter engine; caused by javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.mail.ejb.XIMailAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.mail.ejb.XIMailAdapterBean@243be1e1 for bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: javax.ejb.CreateException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue AFWSend from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection. Reason: the thread of component "ejbContexts/sap.com/com.sap.aii.adapter.mail.app/com.sap.aii.adapter.mail.ejb.jar/XIMailAdapterBean" in application "sap.com/com.sap.aii.adapter.mail.app" is currently associated with a restricted resource set and it is not allowed to get connection within it.
    After that whenever it is trying to process a message its throwing the below error :
    exception caught during processing mail message [588]com.sap.aii.af.lib.mp.module.ModuleException
    Has anybody faced thsi error before? Please help!!!
    Thanks

    Hi VR
    Have you tried swapping by Payload name?
    Please try it out with the following configuration, and remove any extra lines - there are duplicate key names and values in your configuration.
    You should be able to see the successfully swap by payload name in the audit log as shown below.
    Rgds
    Eng Swee

  • Variable Transport Parameters in Mail Sender

    Did anyone ever successfully use the "Variable Header XHeaderName1" in the mail sender adapter (IMAP4)?
    We have two mail sender channels which require a slightly different mapping. My idea was to define a value for the field "Variable Header XHeaderName1" and evaluate that in the mapping. But the value is not passed into the SOAP header, I can configure what I want. I turned on "Adapter spec.attributes" and "Variable Transport...".
    So I cannot access the field value in the mapping.
    Now I evaluate the dynamic configuration field "SUser", that works, but that's only a workaround.
    So either this is a bug in the system (XI 3.0 SP 21) or the documentation is wrong.
    We are using an attachment, is that the problem ? "Use Mail package" off/on does not change anything.
    Any ideas ? No general links to the documentation please.
    CSY
    Edited by: Christian Sy on Aug 15, 2008 8:48 AM

    I think the DynamicConfigurationBean would help in this scenario.
    You can assign a constant value in sender channel and use that constant for the determination of the mapping.
    Regards
    Stefan

Maybe you are looking for