My mailprogram in OS 10.6.7 frequently gives on old content/mail connected to an actual / new sender.

This sounds like an indexing problem. Force a reindexing by deleting the Envelope Index. With IMAP or Exchange account, forcing reindexing requires removing the account folder. See:
http://docs.info.apple.com/article.html?path=Mail/4.0/en/14019.html
Ask any questions needed to get comfortable with doing this. Do you have any third party plugins or Mail enhancement apps that might be moving stuff around? This would not be good for the index. Rebuild on an IMAP account, where local copies of messages are kept may not be as clean as it would for POP and On My Mac mailboxes.
Ernie

Similar Messages

Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

This article is for startup but it might help. http://support.apple.com/kb/ts2570

My HP Photosmart Premium C309g-m printer frequently gives me false "low ink" readings

My HP Photosmart Premium C309g-m printer frequently gives me false "low ink" readings, which wouldn't be a big deal except that unlike other printers I've had, instead of just printing as best it can on low ink, it refuses to print at all.
I know the readings are false:
(a) because I've only recently refilled the ink - (since this started I write down when I refilled the ink and note the number of print jobs, which can be as low as 10 and the false readings can occur) and
(b) my only work around so far is to turn the printer off and on until the false readings stop, it then shows the correct ink levels and does print, but his can often take 5 or 6 times of "off and on." Very annoying.
Questions:
Has anyone else experienced this?
If so, is there a fix?
If no fix, is there a way to change the printer default configuration so it will print anyway -with low ink - instead of simply refusing to print?
Any help is appreciated.
Thank you

Maybe there is some ink on the connections to the cartridges. This document may help with checking those areas after you installed new cartridges last time:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01808074&cc=us&dlc=en&lc=en&product=3793676&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I frequently receive a notice from Mail that it "can't connect" to my yahoo mail account, despite the fact that I can receive mail from that account. The banner appears with my coded password highlighted and asks me to choose 'cancel' or 'ok'.

I frequently receive a notice from Mail that it 'can't connect' to my Yahoo account despite the fact that I am able to receive mail from that account. It appears with the name of my Yahoo account, my password (coded), and the choice to 'cancel' or 'ok'. If I click either, the banner goes away but comes back soon. I can open Mail and see that all accounts are online. I get the banner SEVERAL time during a session - very annoying!
I have several accounts, but this only happens with Yahoo and sometimes Hotmail. Can anyone tell me how to resolve this Mail issue?
Thanks.

I have 5 IMAP and 1 POP (Hotmail).
The Yahoo is IMAP.

Firefox 4 frequently gives message "Firefox is nnot working" and needs restart

I have been using all the beta releases of Firefox 4, but with the final version I frequently receive the message "Firefox is not working," usually when I have it minimized or am otherwise not actively using it. I did not have this problem before the final release. I am running Windows 7 Home Premium with 4 GB RAM. It does not give me a place to file a crash report. So far I can tell, my Firefox installation and all add-ons u to date and compatible with Firefox 4.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]
Create a new profile as a test to check if your current profile is causing the problems.
See:
* [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My Firefox crashes frequently, but I the system can not find the reports to send for analysis.

My Firefox crashes frequently, The system goes to the grayed screen and sits there until I try to close it, then it says "Firefox not responding" and I close the program. When I go to "about:crashes" it says the report was submitted, but I never get any feedback and when I try to retrieve the report to look at it, the system can never find it. This happens at least twice daily. It keeps searching for a while, then displays the gratituous "Oh Noes. The report could not be located" message. I've included the latest crash report address.

Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

How can I disable an frequent update of chart contents?

Hello,
I have a vi with a xy graph (x = time) and lots of data in there (aprox. 6000 values).
I do not update the values very often, maybe once in a second, to not to stress the cpu too much, but I have noticed, that the chart updates much more often and that causes a high cpu load. If I cover the VI with another window druing run time, the cpu load drops to almost 0.
Can I set how often a chart updates? Where?
Johannes
LabVIEW 7.1
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently

Oh, I just found out, that my problem comes from somewhere else.
I set the xscale minimum and maximum every cycle according to the current time. If I reduce this xscale updates, the cpu time drops drastically :-)
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently

Several websites that I frequent require me to right-click to open to a new tab, otherwise they aren't completely visable

This just occurred with a new website and I am now unable to close it. It just remains partially behind another tab/window.

Thank you, I know shortcuts are always an option but I was hoping for a more... automatic? solution. I've resorted to forcing links to new tabs that are "to other sites." It has solved my immediate problem, but still is a bit screwy.
Thank you for the help, though. :]

Icloud emails not working in fact rubbish

Are any body else having problems with icloud emails on their macs? To be honest since the change over from mobileme the icloud setup is pants. I rarely had problems with mobileme and it offered so much more ie websites through iweb and picture galleries. Today I have been unable to send a message, it keeps crashing. In the end gave up. A few months ago my mac email account removed itself from my mail programme, when the icloud system was put in place. For me icloud is a retrograde step and far inferior from previous systems. Thoughts?

I use an imac intel with operating system 10.6.8. I only access my emails using the web as the mail on my mac removed my mac (mobileme/icloud) account when moving to the new system. I access icloud on my mac and PC at work using the web. Both routinely give me problems far more frequently than the old mobileme mail, often logging me out being very slow and not responding. Basically fed up with it at the moment. It also seems to occur at the same time of the day, using the work PC going offline around 11am to 2pm. So I kind of feel that the problem is icloud. But very much open to ideas and suggestions. Many thanks

Mac OS X Lion Server screen freezes frequently

I have recently purchased the Mac Mini Server with 8GB RAM Upgrade and have been experiencing screen freezes frequently. The Mac Mini is connected to a ViewSonic LED Monitor via an HDMI cable and is running Mac OS X Lion Server.
It all started a month ago and I suspected it was due to an external hard disk I had. When I removed it the problem didn't crop up for a few weeks. So I thought the issue was resolved.
Over the past week the problem re-surfaced again and nearly everyday I am experiencing screen freezing about five times a day and the only option is to power down my Mac Mini Server from the power button. This is becoming increasingly frustrating. When screen freezing occurs, everything freezes and I get some small rectangular boxes on screen moving.
The only things that have changed over the past week was that I installed the latest Safari fix and connected the Harman Kardon Sounsticks II to the Mac Mini.
Can't understand what is happening. From various threads I read, many mac users are experiencing screen freezes. If anyone has any resolutions please let me know.

Lion has a screen refresh bug it is just the screen going to sleep and the the screen updating only where the curser moves.

TS1398 I have followed this advice and still unable to get my iphone to connect to my home router. This happens way too frequently and very frustrated

I am very frustrated to come home and find my phone not connecting to the router. This is happening frequently and not sure how to correct it.
Help anyone!

When you say it happens frequently I assume that you can connect but the xconnection drops often

TCP connection for DHCP failover frequently are broken in Solaris 10

Hi
We have two dhcp servers which are installed in Solaris 10 and set to a failover pair. Currently, we can find that tcp connection for dhcp failover protocol are frequently broken. It looks like that primary dhcp server initiatively send FIN message to secondary one but in general, this tcp connection should always keep alive. On the other hand, the tcp connection can not completely be closed right now which FIN_WAIT_2 status in Primary one and CLOSE_WAIT status in secondary would last for a long time.
Will Solaris 10 cause this fault? Is it a known bug in OS?
OS info:
-bash-3.00$ cat /etc/release
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
-bash-3.00$
-bash-3.00$
-bash-3.00$ uname -a
SunOS edns1 5.10 Generic_142900-03 sun4v sparc SUNW,Netra-T5220
TCP connection info:
Primary DHCP Server:
2012 08 29 03:41:43
PING 172.25.6.137: 56 data bytes 64 bytes from edns2 (172.25.6.137): icmp_seq=0. time=0.678 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u   45 1024 377     0.75   -0.071    0.05
+idns2           195.26.151.151   3 u 162 1024 377     0.93    0.169    0.08
clusternode1-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
+clusternode2-pr idns1            4 u 406 1024 376     0.49   -0.154   15.12
172.25.6.133.647 172.25.6.137.58107 49640 0 49640 0 ESTABLISHED
172.25.6.133.647 *.* 0 0 49152 0 LISTEN
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2012 08 29 03:41:47
PING 172.25.6.137: 56 data bytes 64 bytes from edns2 (172.25.6.137): icmp_seq=0. time=0.535 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u   49 1024 377     0.75   -0.071    0.05
+idns2           195.26.151.151   3 u 166 1024 377     0.93    0.169    0.08
clusternode1-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
+clusternode2-pr idns1            4 u 410 1024 376     0.49   -0.154   15.12
172.25.6.133.647 172.25.6.137.58107 49640 0 49640 0 FIN_WAIT_2
172.25.6.133.647 *.* 0 0 49152 0 LISTEN
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Secondary DHCP Server:
2012 08 29 03:41:41
PING 172.25.6.133: 56 data bytes 64 bytes from edns1 (172.25.6.133): icmp_seq=0. time=1.26 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u 450 1024 377     0.92   -0.067    0.06
+idns2           195.26.151.151   3 u 552 1024 377     0.96    0.237    0.08
+clusternode1-pr idns1            4 u 360 1024 377     1.85   -0.528    1.51
clusternode2-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
172.25.6.137.647 *.* 0 0 49152 0 LISTEN
172.25.6.137.58107 172.25.6.133.647 49640 0 49640 0 ESTABLISHED
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2012 08 29 03:41:45
PING 172.25.6.133: 56 data bytes 64 bytes from edns1 (172.25.6.133): icmp_seq=0. time=1.36 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u 454 1024 377     0.92   -0.067    0.06
+idns2           195.26.151.151   3 u 556 1024 377     0.96    0.237    0.08
+clusternode1-pr idns1            4 u 364 1024 377     1.85   -0.528    1.51
clusternode2-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
172.25.6.137.647 *.* 0 0 49152 0 LISTEN
172.25.6.137.58107 172.25.6.133.647 49640 0 49640 0 CLOSE_WAIT
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thanks!

Thanks, but had found a previous discussion with this hint and applied it.
svccfg -s sendmail listprop shows config /local_only = false
Yes, I would really love to fix the fault, but what I would really like is some hints as to how to debug ports under svc control.

Frequent c2s failures

Hi,
BM3.9sp2ir1
NW6.5sp8(with post sp8 patches through April 17,2010)
eDir8.8sp4
We frequently are having problems with clients connecting to our system.
Most using the bm3xvpn12 client with NMAS.
Often have to try multiple times to get connected, sometimes restart the computer, sometimes it just doesn't want to work, but sometimes it will work just fine.
No rhyme or reason that I can find, same user and system will work and then not work. Though those with problems frequently have the problem.
When some have problems, others will be connected just fine, so it isn't just that the server is refusing to accept connections.
the last item shown before it times out on the IKE screen is:
IKE : Nmas user check authentication and traffic rule.
Client sits at the negotiating and authentication message for several minutes then fails with:
may be Invalid VPN Server or IKE not loaded.
No problems at all if I unload the filters, consistently get a VPN connection in under 15seconds.
Is this a possible filter issue?
I have run brdcfg to see that they are all applied. I only do filter work in Filtcfg, never in iManager.
I've run wireshark on the client side and have good and bad captures. everything seems to match up ok until it is in the port 500/4500 sections.
good:
2 cycles of port 500 communications, then switches to 4500 Wireshark Info column says: "Identity Protection (main mode)"
3 sends on 4500, then 3 receives on 4500 Wireshark Info column says: "Identity Protection (main mode)"
and then a send/receive/send on 4500 Wireshark info column says: "Quick Mode"
and then switches to UDP 353 ndsauth
and connected on the VPN.
bad:
2 cycles of port 500 communications, then switches to 4500 Wireshark Info column says: "Identity Protection (main mode)"
3 sends on 4500 Wireshark Info column says: "Identity Protection (main mode)"
NO reply from VPN server
3 sends on 500 Wireshark Info column says: "Identity Protection (main mode)"
No reply from VPN server
1 send on 4500 protocal UDPENCAP wireshare info column says NAT-keepalive
1 send on 500 Wireshark Info column says: "Identity Protection (main mode)"
4 replies on 4500 Wireshark Info column says: "Identity Protection (main mode)"
1 reply on 500 Wireshark Info column says: "Identity Protection (main mode)"
Then client sends on 500 to 4500 Wireshark Info column says: Informational
then back and forth port 500 sends show Informational, replies Identity Protection.
we also have similar problems connecting to another BM server in the same tree (different location)
BM3.8sp5
NW6.5sp5
eDir8.7.3.9

Ok, spoke too soon. just happened to work a couple times.
Server has read-only replicas of everything, plus is master of its own partition.
Turned on NMAS in DSTrace, any other options I should turn on when tracing? I don't see any SLP or NCP addresses.
In a failure, the trace is identical to a success, except that it appears the client doesn't recognize the success message.
Though there is a error in the traces: (both success and failure)
11:16:44 942A3060 NMAS: Accessing local replica of CN=PW Policy.CN=Password Policies.CN=Security
11:16:44 942A3060 NMAS: ERROR: -631 Failed set password for CN=user.OU=ou.O=o
11:16:44 942A3060 NMAS: 34: ERROR: -631 Server Module 0x00000007 Set Password
11:16:44 942A3060 NMAS: 34: ERROR: -631 MAF_SetPassword
11:16:44 942A3060 NMAS: 34: Server Module 0x00000007 Write
11:16:44 942A3060 NMAS: 34: Server Module 0x00000007 Read
11:16:46 942A3060 NMAS: 34: Server Module 0x00000007 Successful
11:16:46 942A3060 NMAS: 34: NDS Login Method Successful
11:16:46 942A3060 NMAS: 34: WhatNext
11:16:46 942A3060 NMAS: 34: Successful login
11:16:48 94201140 NMAS: 34: NMAS session succeeded
11:16:48 94201140 NMAS: 34: Client Session Destroy Request
11:16:48 94201140 NMAS: 34: Local Session Cleared (Not Destroyed)
11:16:48 942A3060 NMAS: 34: ERROR: -1645 Server timed out waiting for data
11:16:48 942A3060 NMAS: 34: Server thread exited
11:16:48 942A3060 NMAS: 34: Pool thread 0x8d43a600 work complete

Dispatcher stops Frequently: Please help

Hi Experts,
im facing issues related to Dispatcher , it stops frequently. as i have restarted the system many times but again same .. PLEASE HELP
Environment . :   ECC6.0, ORACLE, WINDOWS 32 bit
Thanks in Advance and Appreciate the responses....
please find below the dev_disp logs
===================================================================
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ECD
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    333
intno      20050900
make:      multithreaded, Unicode, optimized
pid        5876
kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5876) [dpxxdisp.c   1292]
shared lib "dw_xml.dll" version 333 successfully loaded
shared lib "dw_xtc.dll" version 333 successfully loaded
shared lib "dw_stl.dll" version 333 successfully loaded
shared lib "dw_gui.dll" version 333 successfully loaded
shared lib "dw_mdm.dll" version 333 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Jan 20 10:52:51 2014
*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0041.qqq.nxst) took 12 seconds
Mon Jan 20 10:53:08 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5540]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sap-ec6-dev_ECD_00                      <
DpShMCreate: sizeof(wp_adm) 22152 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06400040, size: 5079600)
DpShMCreate: allocated sys_adm at 06400040
DpShMCreate: allocated wp_adm at 064021A8
DpShMCreate: allocated tm_adm_list at 06407830
DpShMCreate: allocated tm_adm at 06407860
DpShMCreate: allocated wp_ca_adm at 0683D8E0
DpShMCreate: allocated appc_ca_adm at 068436E0
DpShMCreate: allocated comm_adm at 06845620
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 068C64E0
DpShMCreate: allocated gw_adm at 068C6520
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 068C6550
DpShMCreate: allocated wall_adm at 068C65C0
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 5608
argv[0] = E:\usr\sap\ECD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\ECD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\ECD\SYS\profile\ECD_DVEBMGS00_sap-ec6-dev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ECD
argv[7] = -DSAPMYNAME=sap-ec6-dev_ECD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\ECD\SYS\profile\ECD_DVEBMGS00_sap-ec6-dev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Jan 20 10:53:12 2014
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1699]
***LOG Q0K=> DpMsAttach, mscon ( sap-ec6-dev) [dpxxdisp.c   12778]
DpStartStopMsg: send start message (myname is >sap-ec6-dev_ECD_00                      <)
DpStartStopMsg: start msg sent
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 333
Release check o.K.
Mon Jan 20 10:53:15 2014
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4434]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1420
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2668) [nixxi.cpp    4434]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c   1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Mon Jan 20 10:53:53 2014
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Jan 20 10:53:56 2014
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Jan 20 10:58:43 2014
J2EE server info
start = TRUE
state = STARTED
pid = 3560
argv[0] = E:\usr\sap\ECD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\ECD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\ECD\SYS\profile\ECD_DVEBMGS00_sap-ec6-dev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ECD
argv[7] = -DSAPMYNAME=sap-ec6-dev_ECD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\ECD\SYS\profile\ECD_DVEBMGS00_sap-ec6-dev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Jan 20 10:58:44 2014
DpJ2eeLogin: j2ee state = CONNECTED
======================================================================
Regards
Shafeeq

Hi Experts Im sending DEV_W0 logs as well
=========================================================
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        ECD
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    333
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        616
M
M kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 616) [dpxxdisp.c   1354]
I MtxInit: 30000 0 0
M
M Mon Jan 20 10:53:10 2014
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22152 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08980040, size: 5079600)
M DpShMCreate: allocated sys_adm at 08980040
M DpShMCreate: allocated wp_adm at 089821A8
M DpShMCreate: allocated tm_adm_list at 08987830
M DpShMCreate: allocated tm_adm at 08987860
M DpShMCreate: allocated wp_ca_adm at 08DBD8E0
M DpShMCreate: allocated appc_ca_adm at 08DC36E0
M DpShMCreate: allocated comm_adm at 08DC5620
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 08E464E0
M DpShMCreate: allocated gw_adm at 08E46520
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 08E46550
M DpShMCreate: allocated wall_adm at 08E465C0
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M ThInit: initializing DIA work process W0
M ThInit: rdisp/cleanup_after_crash = 1
M ThInit: running on host sap-ec6-dev
M
M Mon Jan 20 10:53:12 2014
M calling db_connect ...
B Loading DB library 'E:\usr\sap\ECD\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\ECD\DVEBMGS00\exe\dboraslib.dll' loaded
B
B Mon Jan 20 10:53:13 2014
B Version of 'E:\usr\sap\ECD\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.324)
C Prepending E:\usr\sap\ECD\DVEBMGS00\exe to Path.
C
C Mon Jan 20 10:53:21 2014
C Oracle Client Version: '10.2.0.4.0', (dbsl 700 131011, UNICODE[2])
C Application info callback registered.
C Client NLS setting (by OCINlsGetInfo): con=0, 'AMERICAN_AMERICA.UTF16'
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECD on connection 0 (nls 0) ... (dbsl 700 131011, UNICODE[2])
C Attaching to DB Server ECD (con=0,svchp=065E5218,srvhp=065F8614)
C Starting user session: OCISessionBegin(con=0, usr='/',svchp=065E5218, srvhp=065F8614, usrhp=06645C28)
C     CbApplInfoGet() failed (ignored 1).
C
C Mon Jan 20 10:53:22 2014
C Now '/@ECD' is connected: con=0, nls_hdl=0, session_id=67.
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con=0,svchp=065E5218,usrhp=06645C28)
C Disconnected (con=0) from ORACLE.
C Connecting as SAPSR3/<pwd>@ECD on connection 0 (nls 0) ... (dbsl 700 131011, UNICODE[2])
C Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=065E5218, srvhp=065F8614, usrhp=06645C28)
C Now 'SAPSR3/<pwd>@ECD' is connected: con=0, nls_hdl=0, session_id=66.
C con=0, V$NLS_PARAMETERS: NLS_LANG=AMERICAN_AMERICA.UTF8, NLS_NCHAR=UTF8
C Nls CharacterSet                      NationalCharSet                        EnvHp      ErrHp      ErrBt
C    0 UTF16                             AL16UTF16                           065E0368   065E5A44   065E52CC
C DB instance ECD is running on SAP-EC6-DEV with ORACLE version 10.2.0.2.0 since JAN 20, 2014, 10:52:51
B
B Mon Jan 20 10:53:23 2014
B Connection 0 opened (DBSL handle 0)
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png
I
I Mon Jan 20 10:53:51 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AA70040, size: 4400000)
M SHM_ROLL_AREA (addr: 87810040, size: 61440000)
M SHM_PAGING_AREA (addr: 0C280040, size: 32768000)
M SHM_ROLL_ADM (addr: 0AEB0040, size: 633840)
M SHM_PAGING_ADM (addr: 0AF50040, size: 787488)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0B020040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateNoBuffer: correct_btc_behaviour = 1
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0B0B0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M Deactivate statistics hyper index locking
B
B Mon Jan 20 10:53:52 2014
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 10AE0088, size: 336)
B dbntab: Buffer FTAB(anchor array) (addr: 10AE01D8, size: 160036)
B dbntab: Buffer FTAB(item array)   (addr: 10B07300, size: 720000)
B dbntab: Buffer FTAB(data area)    (addr: 10BB6F80, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 0E260088, size: 336)
B dbntab: Buffer IREC(anchor array) (addr: 0E2601D8, size: 160036)
B dbntab: Buffer IREC(item array)   (addr: 0E287300, size: 180000)
B dbntab: Buffer IREC(data area)    (addr: 0E2B3220, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 0E890088, size: 336)
B dbntab: Buffer STAB(anchor array) (addr: 0E8901D8, size: 160036)
B dbntab: Buffer STAB(item array)   (addr: 0E8B7300, size: 180000)
B dbntab: Buffer STAB(data area)    (addr: 0E8E3220, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0EBE0088, size: 1688)
B dbntab: Buffer TTAB(anchor array) (addr: 0EBE0720, size: 160036)
B dbntab: Buffer TTAB(item array)   (addr: 0EC07848, size: 480000)
B dbntab: Buffer TTAB(data area)    (addr: 0EC7CB48, size: 5840000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 13949F90)
B dbtbxbuf: Buffer TABL (addr: 160700C8, size: 30000000, end: 17D0C448)
B dbtbxbuf: Buffer TABLP (addr: 0F2100C8, size: 10240000, end: 0FBD40C8)
B dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B    semkey             = 35
B    shmkey             = 54
B    wp_n               = 13
B    sclass             = 0
B    block_length       = 256
B    max_objects        = 2000
B    max_obj_size       = 880160
B    pref_obj_size      = 0
B    est_large_obj_size = 16384
B    free_vec_lg        = 65
B    hash_vec_size      = 4001
B    buffer_l           = 4194304
B    max_blocks         = 13754
B    free_blocks        = 13754
B    mutex_n            = 4001
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B dbexpbuf[EXP_SHM]: buffer ESM   installed with
B    semkey             = 56
B    shmkey             = 65
B    wp_n               = 13
B    sclass             = 0
B    block_length       = 256
B    max_objects        = 2000
B    max_obj_size       = 880160
B    pref_obj_size      = 0
B    est_large_obj_size = 16384
B    free_vec_lg        = 65
B    hash_vec_size      = 4001
B    buffer_l           = 4194304
B    max_blocks         = 13754
B    free_blocks        = 13754
B    mutex_n            = 4001
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B dbexpbuf[EXP_CUA]: buffer CUA   installed with
B    semkey             = 30
B    shmkey             = 47
B    wp_n               = 13
B    sclass             = 10
B    block_length       = 512
B    max_objects        = 1500
B    max_obj_size       = 641440
B    pref_obj_size      = 0
B    est_large_obj_size = 98304
B    free_vec_lg        = 193
B    hash_vec_size      = 3001
B    buffer_l           = 3072000
B    max_blocks         = 5012
B    free_blocks        = 5012
B    mutex_n            = 3001
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B dbexpbuf[EXP_OTR]: buffer OTR   installed with
B    semkey             = 55
B    shmkey             = 64
B    wp_n               = 13
B    sclass             = 13
B    block_length       = 256
B    max_objects        = 2000
B    max_obj_size       = 880160
B    pref_obj_size      = 0
B    est_large_obj_size = 20480
B    free_vec_lg        = 81
B    hash_vec_size      = 4001
B    buffer_l           = 4194304
B    max_blocks         = 13754
B    free_blocks        = 13754
B    mutex_n            = 4001
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B dbcalbuf: Buffer CALE (addr: 13010040, size: 500000, end: 1308A160)
M rdisp/thsend_mode : -1 -> 0
G
G Mon Jan 20 10:53:53 2014
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1D404C20
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S
S Mon Jan 20 10:53:54 2014
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 216500A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 21650430
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2480 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 19392kb, dir_size: 19300kb.
A Attached to PXA (address 8B2B0040, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A SHO: Set profile parameter abap/shared_objects_timeout to 10
A ABAP ShmAdm attached (addr=B8506000 leng=20955136 end=B9902000)
A >> Shm MMADM area (addr=B89695C0 leng=126752 end=B89884E0)
A >> Shm MMDAT area (addr=B8989000 leng=16224256 end=B9902000)
A RFC Destination> destination sap-ec6-dev_ECD_00 host sap-ec6-dev system ECD systnr 0 (sap-ec6-dev_ECD_00)
A RFC Options> H=sap-ec6-dev,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 27042 bytes at 0B0D0040
N
N Mon Jan 20 10:53:55 2014
N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\ECD\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is E:\usr\sap\ECD\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="E:\usr\sap\ECD\DVEBMGS00\sec"
N ===...loading of Security Toolkit completed with rc 5 (SSF_SUP_NOTALLFUNCTIONS).
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Mon Jan 20 10:53:58 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B     max_blocking_factor =   5, max_in_blocking_factor      =   5,
B     min_blocking_factor =   5, min_in_blocking_factor      =   5,
B     prefer_union_all    =   0, prefer_join                 =   0,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B     convert AVG         =   0, alias table FUPD            =   0,
B     escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.333.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [26]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Profile-Parameter: enque/deque_wait_answer = FALSE
E Profile-Parameter: enque/sync_dequeall = 0
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Jan 20 10:53:59 2014
S server @>SSRV:sap-ec6-dev_ECD_00@< appears or changes (state 1)
S
S Mon Jan 20 10:54:00 2014
S server @>SSRV:sap-ec6-dev_ECD_00@< appears or changes (state 1)
A
A Mon Jan 20 10:54:03 2014
A ***GENER* Trace switched off ***
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 07160040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 071607A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 071607E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 071607EC
M SecAudit(check_daily_file): audit file opened E:\usr\sap\ECD\DVEBMGS00\log\20140120.AUD
B
B Mon Jan 20 10:58:43 2014
B 316 seconds passed since last buffsync
S
S Mon Jan 20 11:06:43 2014
S found spool memory service RSPO-ACTIONS at 21659AF8
B
B Mon Jan 20 11:15:32 2014
B dbmyclu : info : my major identification is 3232236530, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is E381960EE8794FF1B90F0013211F21B9.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
=================================

Best Solutions For Offline Address Book on Workstations Not Updating Frequently Enough?

We use Exchange 2010 SP2 and we set Outlook 2010 to Exchange Cached mode by default for all workstations. This seems to work OK for the majority of email most of the time, but because we are very frequently adding and removing external mail contacts
and and adding and removing them from distribution lists, the GAL and distribution lists memberships are frequently out of date in the middle of the work day.
Sometimes the users can manually download an updated OAB assuming it has been updated on the server, but sometimes the OAB is not updated yet and redownloading the OAB solves nothing. It is a lot of hassle, confusion about bounced messages and
missing contacts and phantom names in distribution lists with this method.
I notice that for mail contacts, there is an All Contacts address book that is live, but it does not include include anything else other than contact addresses. Distribution List memberships are still out of date until the OAB is updated on the server
and then downloaded to the Outlook client. This is taking too long.
Is there a keyboard shortcut to force the client to do a GAL address lookup in online mode rather than using the cached OAB?
Can Outlook display both an online and offline address book for the GAL and let the user manually select online version of the GAL if a contact or new mailbox or DL has not synced to the OAB yet?
If we set the registry key to force online address books even when Outlook is in cached Exchange mode, is there any performance downside for PCs on the LAN other than the GAL being unavailable when the network is not available?
Would the Exchange server have a significantly higher load if most PCs were accessing the GAL without an OAB cache?
If we should not expect a significant increase in server load or network traffic, we might set desktops to use online access to the GAL and only laptops to use OAB.

Hi,
If users are accessing the GAL without OAB cache, definitely it will increase in server load and network traffic. If you are in cached mode, one suggestion is to define that in Send/Receive Settings:
Go to Send/Receive Groups -> Define Send/Receive Groups
-> Select the account and Edit -> Select
Include the selected account in this group, and check Download offline address book -> Click
OK -> Go back to Send/Receive Groups, select the frequency for automatic send/receive(Schedule an automatic send/receive every x minutes.), and then close.
I hope this setting can help in your scenario.
Regards,
Melon Chen
TechNet Community Support

My mailprogram in OS 10.6.7 frequently gives on old content/mail connected to an actual / new sender.

Similar Messages

Maybe you are looking for