My MBA 13" Late 2010 displayport to TV has stopped working, is there a way to troubleshoot the port? Have tried several different ways of trying, but TV still reads "No Signal"?

My MBA 13" Late 2010 displayport to TV has stopped working, is there a way to troubleshoot the port? Have tried several different ways of trying, but TV still reads "No Signal" while the TV changes resolution as if it were sharing it's screen?

Hi garyducati,
If you are having issues with the video out on your MacBook Air, you may find the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Similar Messages

The home button has stopped working on my iphone 5c. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode.

Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.

If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

Apple Outlook DAV config has stopped working (Win 8 x64, Office 2010 x64, iCloud CP 2.1)

Hello,
I'm trying to setup iCloud Control Panel 2.1 but always getting message "Apple Outlook DAV config has stopped working"
I have Windows 8 PC x64 and Office (Outlook) 2010 x64.
Why Apple simple can't make normal iCloud tool?
Why simply can't work normaly?
Why I need try:
archiving old items
running pst repair tool
deleting old items up to about the begining of this month
removing recurring appointments
I use recurring appointments and I dont want remove them, I have multiple calendars and I dont want remove some calendars. Apple goes in wrong way...
Best rgrds

I am having this same issue, do anyone has an answer?

Microsoft Standard 2010 setup has stopped working

Uninstalled Office Standard 2013.
I downloaded ISO Microsoft Office Standard 2010 from Volume license site, and burned to a dvd, launched the dvd and was able to get to the screen "click" to install office. I clicked the button and
The progress bar launched, but after a couple of minutes the application stopped closed, and the message "Microsoft Office has stopped working" was displayed.
I have run "Fix It" but still the same result.

Please Save the Fix it tool locally and then use it. Clicking "Run" directly won't work.
I would suggest you to follow the manual steps listed in follow article for uninstalling Office 2013, not only run Fix It tool:
http://support.microsoft.com/kb/2739501/en-us
Please restart your computer after you finish the manual steps, then retry the Office 2010 installation.

Many years ago I purchased CS2 with serial number 1130-0676-7755-3637-6984-8039. Later i purchased a used macmini from a private party with OSX 10.6.8 with CS5 already on it. It has stopped working. Can I purchase a new version of CS5 for my older system

My name is Don Lewis. My email is [email protected]
Many years ago I purchased CS2 for my older Mac Mini with OSX 10.4.11. My serial number is 1130-0676-7755-3637-0984-8039. Then a few years later I purchased another Mac Mini with OSX 10.6.8 from a private party that had CS5 already installed which now has stopped working on that computer. Can I purchase an CS5 upgrade for my OSX 10.6.8 from Adobe Systems?

Can I get any answer to my question?
My name is Don Lewis. My email is [email protected]
Many years ago I purchased CS2 for my older Mac Mini with OSX 10.4.11. My serial number is 1130-0676-7755-3637-0984-8039. Then a few years later I purchased another Mac Mini with OSX 10.6.8 from a private party that had CS5 already installed which now has stopped working on that computer. Can I purchase an CS5 upgrade for my OSX 10.6.8 from Adobe Systems?
forumnotifier

My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

Follow the steps here. If nothing works, make an appointment at an Apple store or with whoever handles iPhone warranty where you live:
http://support.apple.com/kb/TS1398

Hello. I am having trouble using Mobileme with microsoft oulook 2010. .The error Mobileme has stopped working . Can anybody help. ??Thanks

Hello
I am having trouble using Microsoft Outlook 2010. When starting Microsoft Outlook displays the error message Mobileme has stopped working. Can anybody help.
Thanks

Well yes, of course you are having trouble using MobileMe because MobileMe no longer exists and has not existed for the last 2 years at least.
MobileMe has been replaced by iCloud, so you will never be able to use MobileMe because it does not exist.
Also, I would suggest that you look more closely before you post, because you have posted this in an iPhone forum and this question has nothing to do with iPhones. You would get more help if you posted in the correct forum.

Office Home and Student 2010 has stopped working Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )

My office is saying its an unlicensed product and it prompts me to re install. It come up with Microsoft Activation Wizard then when I select to activate software via the internet an error comes up saying:
Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )
Please can you help me? I have tried pressing shift and right click an using system administrator but still not working. I've called the UK helpline and have been cut off twice after repeating myself to the person on the other end. May be easier
to try and get some assistance on here?

Hi,
This error can indicate a permissions issue in the registry and/or other operating system issues.
Here is a
blog post which descripts some fixes to this specific error:
Check the Device Manager first to determine whether the issue was caused by an underlying operating system issue.
If it's not an issue with the operating system, try the rest steps descripted in the blog to troubleshoot the issue.
Please have a try and feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Trackpad on 2011 i7 MBA has stopped working twice and won't work again until I do a hard reset. Battery is not hot. MBA is 2 weeks old. What's up, Apple?

Twice, shortly after turning on my MBA from a restful night's sleep, my keyboard and trackpad have stopped working. Works fine after a hard reset, but considering this baby is brand new, it shouldn't be happening.
I am in law school and don't have time to leave my MBA with applecare.
HELP!

hello, i have the same problem with my mbp. and you should first shut off your MB. then when is complete off plug in your charger and hold shift+option+command+power and within 10 second you will see the front led flash 10 times more or less and your MB will restart and it should work normal

My Reminder app won't open. It worked for a few days but later on it doesnt work anymore! tried rebooting my and updated it but it still wont open. When I try opening it, it crashes. What do I doooo? Please help me.

My Reminder app won't open In ipad mini 2. It worked for a few days but later on it didn't work anymore! tried rebooting and updating it but it still wont open. When I try opening it, it crashes. What do I doooo? Please help me.

Try to force quit the app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.

I have a MacBook Pro 13inch 2.4GHz (Intel Core 2 Duo, 4Gb RAM, 250Gb HDD, NVIDIA GeForce 320M graphics, SD card slot, up to 10 hour battery life)bought in October 2010 in the UK. The charger has stopped working. Which model and voltage do I need please?

I have a MacBook Pro 13inch 2.4GHz (Intel Core 2 Duo, 4Gb RAM, 250Gb HDD, NVIDIA GeForce 320M graphics, SD card slot, up to 10 hour battery life) bought in October 2010. The charger has been playing up for a while now - the light going out but coming back on when I move the cable a bit - faulty connection it seems. It has now stopped working at all.
Apple UK charge a whopping £65 for a replacement - and the reviews are AWFUL for it!
I need to know which one I need - 45w, 60w and 80w are listed - can someone tell me please? If I'm going to pay this price I want to make sure I get the right one!
Also, is a genuine Apple one available on Amazon UK, does anyone know please?
Any help will be much appreciated.
Meanwhile my battery is going down.....

Thanks for that wjosten. Much appreciated.
I've read here on Apple's site that the 85W version will work, as you say, and that it would run cooler with a 13" Macbook - I have a 13" MBP of course but assume this would be the same with mine. I wonder if running cooler is a good thing (it sounds as if it is) and it would be better for me to get the 85W version than the 60W one?
Then I have to decide whether to pay the (extortionate as it seems to me, though I may be wrong) £65 from Apple (bearing in mind the rotten reviews here of the Apple product), or risk a cheaper alternative from Amazon UK, at around £20 (also with various rotten reviews)... Any suggestions? Please? :-)

2010 Mini superdrive has stopped working after Mountain Lion update - anyone else?

After updating to 10.8 the superdrive on my 2010 mini has completely stopped working. It will not accept any disks. Disk Utility sees the drive as a working drive. Anyone else having this issue? If yes and you've resolved it, how??

Same thing happened to me with Mountain Lion. It seems that at the moment there's no solution. I've tried to burn a DVD with Toast Titanium, iDVD and the SimplyBurn. All of them failed.
It's a shame that Apple did this because we pay for a computer with a drive that could burn DVD discs. I´m very, very disappointed with Apple!

MBA 13" late 2010--picky with reading clones from external hd's?

i have today tried to 'option restart' the mba, and then startup with an attached bootable usb hd.
my iomega prestige 1tb machine is recognised but won't startup..(i get the grey death screen when i attempt that), but my lacie 2tb quadra will startup ok.
they both have the identical clone on board. (it's of my 27" i7 machine)
apple care said to try putting a mba clone to the iomega drive and try to do the option startup again.
i did this and the iomega started up ok on the mba, showing the freshly done bootable clone of itself ok.
what i need is a hard drive that will reliably launch a bootable backup on the mba,
but that bootable clone needs to be of another machine..mbp, imac, mac mini, etc..
anybody have a portable hd that they know works with say a bootable clone of osx 10.6 from one machine
and the latest mba's?

many thanks kappy,
the mba is 10.6.5.
makes sense..
yeah i am currently trying to prove what you say is the case, by re-cloning my other 10.6.5 machines onto the various external hds i have, and seeing whether the mba reads them properly as bootable..
so far it's good with the fresh clone of the mbp we have here,
in a couple hours will try the fresh 27" i7 clone.
i tend to prefer factory made external hds and not fool around with aftermarket enclosures.
i'd imagine most lacie and samsung portable /desktop drives would be ok for bootable backups?
thanks again

Mid 2010 27" IMac Target Display Mode has stopped working

I have a 27" mid 2010 IMac, NOT the thunderbolt version, and have been using it in target display mode for my Mac Pro and 2010 Mac Mini with no problems. I have used the Belkin cables, and routinely would switch between internal and external machines using Command-F2. Worked like a champ for about 7 months.
Today, with no obvious change, I cannot get the IMac to enter TDM. This is true whether I use the Mac Mini or the Mac Pro, and is true using either of two Belkin Cables.
I reset the PRAM and NVRAM on the IMac, but this made no difference. I changed keyboards from my Bluetooth IMac keyboard to an Apple USB keyboard. Again, no improvement. I have rebooted the machine without benefit. The IMac seems to function just fine in every other respect.
Since I have no other monitor that supports the mini DisplayPort on the two other machines, I am dead in the water at this point.
The machine is a mid 2010 27" IMac, OSX 10.6.7, 2.93Ghz I7 CPU, 16 Gb RAM, 480Gb SSD and has worked well for quite a few months.
Any help will be appreciated.

When the display only shows the background, it's working in extended desktop mode. That's a logical extension of your desktop to the right of the MBP. Drag an application off the MBP to the right and it will appear on the iMac. When you close the lid of your MBP the iMac becomes the primary monitor in Clamshell mode.
If you want to mirror the MBP to the iMac then press CMD F1, press again for extended desktop mode. These settings are in System Preferences > Display > Arrangement tab.
When the iMac is in Target display mode, you don't use the keyboard on the iMac. Use the keyboard on the MBPro.

My MBA 13" Late 2010 displayport to TV has stopped working, is there a way to troubleshoot the port? Have tried several different ways of trying, but TV still reads "No Signal"?

Similar Messages

Maybe you are looking for