My MBP 13" can be used always with AC adapter?

Simply (silly) question as subject.
I primary use my MBP 13" connected to AC adapter and only few times it is used with battery. I guess it is not good for battery health and with company notebook I use to remove it while I use it at home with AC adapter (I can't do it with the MBP).
What to do? any suggestion?
thank you in advance
G

It will be fine to keep it connected nearly continuously to AC mains adapter. I've done that for years with PowerBooks and MacBooks, and MacBook Pro's. The charging system is very smart and won't harm the battery with overcharging. However, two things should be kept in mind.
1. Don't let the laptop overheat. Heating a fully charged lithium battery reduces its charge capacity.
2. A few times per month run the battery down to about 50% capacity to exercise it. Otherwise you may lose capacity faster than normal. Actually keeping it at 100% charge does somewhat reduce its shelf life, but removing the battery and risking data loss with power failures costs more than a battery.
3. Every four months or so run the battery all the way down to the machine shutting itself off to recalibrate the capacity estimation system. This reduces physical charge capacity each time you run the battery all the way down, but is needed to keep the charge estimation systems in sync with the actual battery condition. Do not do this frequently.
This regimen allows me to keep my batteries in good condition for years despite running 98% of the time on mains.

Similar Messages

  • Can I use Solaris with my Home Recording Studio?

    Hello,
    I am currently building a basic home recording studio. I recently assembled a new computer and will be purchasing music recording equipment very soon. Before I purchase the audio recording gear, I was curious about a few things pertaining to the use of Solaris as my possible choice system.
    The data that I store on my hard drives will need to be secure. I had originally considered RAID 5 though recently found out about RAID Z, which appears to be far ahead of the other RAIDs. I am curious to know more about how to set up a RAID Z system.
    The computer will be running Solaris, various Linux or BSD, and Windows Vista. I have 500GB x4 hard drives. I am considering separating one and using it strictly for Vista, and using the remaining 3 with a RAID set-up for nix. If I had a choice, I would put much less hard drive space into Vista (capping it at 150 to 200 GB), though I have yet to come across a RAID system that effectively or efficiently cooperates cross-platform. With that in mind, the majority of the remaining 1.5TB can go into my studio OS - hopefully Solaris - while left-over hard drive space is set aside for various other *nix.
    I've used Solaris 10 before, though haven't really gone into detail on the mechanics of such features as ZFS, zones, now RAID Z, and the many more amazing features that Solaris provides. Likewise, I am not really familiar with how well the system might operate with software/applications that I could use for recording and composing music.
    Beyond the available 2TB (or 1.5TB RAID-ready) space, my computer is running on a new 64-bit quad-core AMD CPU (~2.6GHz) and currently has 4GB 1066MHz RAM. In my search for preparing a computer that suits me for high performance recording - including the editing and mastering of audio - I am attempting to narrow down my options on the software side of things. I have been very satisfied with the general file management of Solaris, though am unsure of how well it might run as the software side of a home recording studio. An additional factor in deciding will be the software's compatbility with audio PCI cards and external recording/audio interfaces. There is always a question of whether or not the necessary drivers, firmware, or similar is available between any given hardware and software components.
    Some other *nix options I have considered - "Ubuntu Studio 64-bit" (though it appears to prefer 32-bit) and "64 Studio" (also Debian-based, though appears to be optimized for 64-bit). Some colleagues have used Gentoo with studio applications, though I don't know of any Linux distributions that offer the versatility, power, stability, and efficiency of Solaris for the operating system that it is.
    If I use something like "64 Studio", I will have the advantage of a system that is ready-built for studio recording purposes as well as a system that I know is compatible with the sound gear that I am considering purchasing. However, those systems are restricted by their file system types, RAID availability and dependability, and the general disadvantages of using the Linux kernel in general. (I enjoy Linux, though I admittedly prefer Unix over it.)
    Can I use Solaris with my home recording studio?
    Thank you!
    Edited by: the_professor on Nov 9, 2008 6:26 PM
    Corrected a typo.
    Edited by: the_professor on Nov 9, 2008 6:30 PM
    Caught another typo.

    I'm not sure what your question is. If you have particular software you want to run, you should see what you can get that package to run under. Sound hw stuff don't tend to be too portable unless it's written on top of OSS (htttp://www.opensound.com). Were I you, I'd consider separating out the storage part and the processing part. Get something like a cheap dell sc440 to be a file server and give the drives to that (unless you actually can get all the components working under solaris).
    -r

  • Using CS5.5 Master Collection for MAC, I can't use "Replace with After Effects composition"

    Using CS5.5 Master Collection for MAC, I can't use "Replace with After Effects composition" because I updated AE to CS6 (but only AE). Even that AE CS 5.5 is still installed, it won't connetct.
    How can that be fixed?
    Thanks a lot for any suggestions.

    Thanks for the answer: I tried different ways (after I read your suggestion) but it always changes back right away ... I can't change it.
    Am 16.01.2013 um 03:04 schrieb Jim Simon:
    Re: Using CS5.5 Master Collection for MAC, I can't use "Replace with After Effects composition"
    created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    Maybe try associating AE project files with 5.5 instead of 6.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4997081#4997081
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4997081#4997081
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4997081#4997081. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way?

    I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
    Thanks,
    Sean

    The answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
    https://discussions.apple.com/community/professional_applications/aperture
    However I believe you can have Aperture installed on two machines however only one may be using it at a time.
    On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine.

  • I installed 5 but now I can't use it with Mac osx - how do I go back to my old version?!

    I was prompted to install Firefox 5 on my Mac. Now when I try to open it says I can't use Firefox with osx. How do I go back to using the previous version - has it been written over? My previous version was fine!

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    try
    http://support.apple.com/kb/ht2589

  • How can I use LCCS with ActionScript 3 and Flash CS4?

    Hi,
    Using Stratus I was able to create an an application using Action Script 3 and Flash CS4.  The sample code on the Adobe site was quite straight forward and easy to understand.  I now want to switch over to  LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS.  Do I need to know Flex to be able to use LCCS?  Everything was quite simple and easy to understand with Stratus and makes complete sense.  But LCCS is really confusing.  Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client.  There is nothing in the  LCCS SDK that covers Flash and Action Script 3.  Please help!  I found the link below on some forum but it takes me nowhere.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

    Thanks Arun!
    Date: Thu, 29 Apr 2010 11:44:10 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
    Hi,
    Welcome to the LCCS world.
    Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a  pretty basic app, but should help you moving.
    We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
    Thanks
    Arun
    >

  • How can I use Bluetooth with another devices?

    How can I use Bluetooth with another devices?

    You can set up your FaceTime account in Settings > FaceTime.

  • How can i use ipad with apple tv

    How can i use ipad with appletv

    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store.

    How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store. 

    Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

  • Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive

    Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive

    You cannot use pendriver.
    Have a look at the following:
    http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
    http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
    http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
    http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1

  • My iPhoto icon has a cross over it, when i open it, it You have "iPhoto" 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?

    my iPhoto icon has a cross over it, when i open it, it You have “iPhoto” 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?

    iPhoto 9.2.3 is incompatible with MacOS 10.9.3 Mavericks. If you are running Mavericks on your system you need to update iPhoto to 9.5.1. Only, the problem is, that this version is no longer available at the App Store.
    The easiest way to get a compatible iPhoto version in that case would be to upgrade to Yosemite, MacOS X 10.10, and then download the most recent iPhoto version from the AppStore, iiPhoto 9.6, like LarryHN suggested.
    If you cannot download iPhoto after upgrading to iPhoto 9.6 post back.

  • HT2499 Can I use Airplay with dvd to watch dvd on my tv via AppleTV 3?

    Can I use Airplay with dvd to watch dvd on my tv via AppleTV 3?

    Welcome to Apple Support Communities
    Of course. If your Mac is compatible with AirPlay Mirroring, you can watch your DVD in your TV with the Apple TV. Read > http://support.apple.com/kb/HT5404 You just have to play the DVD on your MacBook and turn on AirPlay Mirroring.
    If your Mac isn't compatible with AirPlay Mirroring, you can use a third-party app like Beamer

  • I can't use Quicken with Lion.  Now what?

    I can't use Quicken with Lion.  Now what?

    Peter,
    Another solution, though not particularly convinient, would be to create a Snow Leopard boot drive on a external drive that you can switch to when you want to run Quicken.
    Matt

  • Can I use Ping with Russian App store account?

    I have a russian App Store account. Can I use Ping with it?
    And if I can't, Can I make an USA App Store account without a card?

    Put a credit card in the payment methods. The credit balance will be used first and the remainder charged to the card.

Maybe you are looking for

  • ITunes 7.0.2 freezes a few seconds after I open it

    Every time I open my iTunes, it works fine for about 2-3 seconds (enough time for me to go to my music library or to connect to the iTunes store) and then it completely freezes. Nothing looks different on the screen, but I can't scroll, play any musi

  • How do I access and use my iTunes library on a different computer?

    How do I access and use my i Tunes library on a different computer?

  • How do you change the order of songs on ur itunes??

    yeah, some of my album tracks are out of order, id like to change that, any ideas?

  • Company code in Spain

    Hi I am going to create a Spanish company code on SAP and I have an SAP document from 2001 that advises on Spain which helps with the legal requirements,  however I wondered if anyone could tell me if there is a later version of this PDF or any other

  • Diadem not Responding- DIAdem.TOCommand

    Hi ALL, I have an issue here. I have developed a VB .net Code that Will call Diadem  10.2 and pass information to Diadem and call a SCRIPT. This application was workign fine in Windows 7 machines and other XP machines i have installed. But when i tri