My MBP 13" Mid 2012 wont start up anymore after Yosemite update

My MBP 13" Mid 2012 wont start up anymore after updating to Yosemite. I tried various fixes but i think this escalated to an HDD problem. Startup disk wont show up both in DiskUtility and re-install OSx via Internet Recovery. Though I kind of doubt that an update can actually harm your HDD or RAM, is it even possible that Yosemite Effed up my unit? Should apple be responsible for the fix?
Thanks!

Hello djChrisFox,
Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Similar Messages

  • Wine doesn't start utorrent anymore after latest update [SOLVED]

    Like the subject says, wine doesn't start utorrent anymore after latest update.  The output I get is the following:
    $ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
    fixme:vxd:VXD_Open Unknown/unsupported VxD L"sice.vxd". Try setting Windows version to 'nt40' or 'win31'.
    fixme:vxd:VXD_Open Unknown/unsupported VxD L"ntice.vxd". Try setting Windows version to 'nt40' or 'win31'.
    err:imagelist:ImageList_LoadImageW Error loading image!
    err:imagelist:ImageList_LoadImageW Error loading image!
    err:imagelist:ImageList_LoadImageW Error loading image!
    fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33e7b8
    fixme:keyboard:UnregisterHotKey (0x30024,1): stub
    and then it hangs.  If I change my Windows version in winecfg to for instance Windows XP, the first 2 errors disappear, but wine still hangs:
    $ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
    err:imagelist:ImageList_LoadImageW Error loading image!
    err:imagelist:ImageList_LoadImageW Error loading image!
    err:imagelist:ImageList_LoadImageW Error loading image!
    fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33edf8
    fixme:keyboard:UnregisterHotKey (0x30026,1): stub
    The vm.legacy_va_layout sysctl is not enabled:
    # sysctl vm.legacy_va_layout
    vm.legacy_va_layout = 0
    Does anybody have an idea to what might be going on?
    Enabling DRI and disabling DRI doesn't help.  Updating to the latest wine 0.9.30-1 also didn't change anything.
    Last edited by tunkaflux (2007-01-31 12:45:44)

    Problem is solved.  Had to delete the .wine folder.  Lost all utorrent settings, but it works again now.

  • MBP 13' mid 2012 slow start up?

    my MBP 13' mid 2012 single partition 750HDD slow start up 1 (60second) , how can i do to increase my start up, need do 2 partition or what ? please help me

    60 seconds is a long time to start up - do you have many login items or do you use the "Reopen windows..." checkbox when you shut down or restart?
    Clinton

  • MBP 13" Mid-2012 stuck on apple logo after installing Maverick

    I own a MBP 13" Mid-2012 with Mountain Lion installed on it. When I upgrade to Maverick via Apple Store/Internet Recovery/USB it gets stuck on Apple Logo with a grey spinning wheel below. I tried disk repair with disk utility, and resetting PRAM but still nothing happens. When I reinstall Mountain Lion it works again. And no, unfortunately I don't have a back up. What to do? Please don't tell me to bring it to an Apple Store because all they have to say is that my logic board needs to be replaced which I couldn't afford. Help!

    Sooner or later, your logic board is going to fail completely. You need to start a backup, preferably more than one
    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Jumpstart failing to start on Mac after Yosemite update

    Just an FYI to the group:
    Recently upgraded to Yosemite.
    All jumpstarts  stopped working for me. Needed to add  -Djava.net.preferIPv4Stack=true to the JAVA_OPTS or the final step of JSK start up validation (system calling itself to see if it is ‘alive’) was getting ‘lost’ due to IPv6 settings.
    Not sure if this is related to ALL Yosemite users or just me  - -either way, I thought I would share

    The issue is with Java version. Yosemite upgrade remove all the previous installed java versions. It supports only Java 7+ and it won't accept the java 6 as it recommends Java 8.
    Install the supported java version of webcenter sites and add the below line to the run.sh.
    export JAVA_HOME="`/usr/libexec/java_home -v '1.7*'`"
    Make sure the JAVA_HOME is pointing out the installed java version. In my case it is java1.7.

  • Need HELP, what is going on with my MBP 13' Mid 2012.. Please..

    My MBP 13" mid 2012 running on OS X Yosemite 10.10.1 (14B25)
    Processor = 2.5 GHz Intel Core i5
    Memory = 4 GB 1600 MHz DDR3
    Graphics = Intel HD Graphics 4000 1024 MB
    It can't turn on. But Magsafe has no problem, battery looks fine too,
    It only turned on if i haven't use it over a few days or a week... after that, i try to turn it off or just get it on sleep mode then it won't turn on again over few days/week..
    Does anyone had a same problem or solution for this problem?

    Hi rizal.umaternate,
    I would start with resetting the SMC to see if it will start to power on again. If not then you will probably need to contact Apple for further support. Take a look at the article below to start you on troubleshooting your issue. 
    Troubleshooting: My computer won't turn on
    http://support.apple.com/en-us/TS1367
    Let me know if this helps,
    -Norm G. 

  • HT201177 How to connect my MBP 13" (Mid-2012) to a projector/LED TV using a mini-display port VGA adapter (CAPDASE)

    Hello Sirs, I'm having a hard time connecting my MBP 13" (mid-2012) to my projector using my mini-display-VGA out adapter. But when I switch to Windows 7 (via bootcamp), it can easily be connected... Please help me with this problem. Thanks

    Try connecting the Minidvi to the VGA and connect it all together, first try turning ing on the MBP, then connecting dvi to the the projector. Make sure your projector input is set for VGA. If noo joy invert the affored mentioned proceedure. You should see your image if not, try going to system preferences>displays, click display.   Try readjusting the resolutions in display. reboot monitor.

  • MBP 13" Mid-2012 (Non-Retina) - Display Washed Out

    Just received my new MBP 13” Mid-2012 (Non-Retina). Comparing this to the 1280x800 display on my 2010 White MacBook, it looks washed out at full brightness, the colours are not deep and rich as they was on my old MacBook. Has anyone else experienced this? My next step is to use the calibration tool built into OS X to see if that helps.

    If I were you, I would take the machine into your local Apple Store and compare it with similar models on display. My late 2011 15" has a bright, vibrant screen and so should your new 13".
    If you see that your display is simply not up to par, exchange your computer for another - you have 14 days from date of purchase to exchange or return for a full refund.
    Good luck,
    Clinton

  • Bluetooth issues on MBP 15 Mid 2012 with SSD OCZ Vertex 4

    Hello,
    I work on MBP 15 Mid 2012 with SSD OCZ Vertex 4 and I have problem with my bluetooth (mouse sometimes is very slow, laggy, the same problem with keyboard, keys are working with a delay) Unfortunately  it happens only with SSD drive and when I have plugged oryginally, apple’s drive everythink it’s ok. Software, firmware are the latest, I tried each reseting (PRAM etc...) and nothing helped. Do you have any ideas?

    Same combination and same issue.  I see a thread about this here:
    https://discussions.apple.com/message/21659917#21659917
    My guess is that the SSD is causing interference with the bluetooth somehow.

  • Can I use RAM from MBP 15 late 2011 to MBP 13 mid 2012

    Hi All,
    I presently have an MBP 15 late 2011 (running at 4GB RAM) - which I feel is very slow. Had been reading a lot of discussion threads and most viable solution seems to be to upgrade my RAM - found it in Crucial.com (8gb x 2 kit).
    I have another MBP 13 mid 2012 (running at 2GB RAM). I was wondering if I can transfer my 4GB RAM from my MBP 15 to my MBP 13.
    Will there be any compatibility issues? Will this work?
    Can anyone advise please?
    Thanks.

    Macs can be very Fussy about RAM...
    You can use these Links to check which RAM is suitable for your Mac...
    http://eshop.macsales.com/shop/apple/memory/
    http://www.crucial.com
    It is Important to get the Correct and Matching RAM
    Those sites also have videos on how to Install RAM should you need it....

  • Apple Hardware Test freeze on MBP 15 mid 2012

    I changed the ram on my new mbp 15 mid 2012 from 4gb to 16gb. Now AHT  freeze on Testing Memory with both type of ram, why? It's not my first time when I change ram, I'm on my 4th MBP. Any ideas? tks

    Hi,
    there is a known problem (I know it for sure from a friend that works at a apple service) with non retina mid 2012 macbook pros not responding in AHT test, most likely your RAM is fine. Just do MemTest and see if anything's wrong with it.
    FYI
    Reported this problem in bug reporter some time ago, the answer:
    Engineering has determined that there are no plans to address this issue.
    Clearley they know about it and don't want to solve it, to bad.

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • Itunes starts extremely slow after an update of windows 8.1.

    Itunes starts extremely slow after an update of windows 8.1.
    It takes up to 10 minutus.
    If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
    For instance:
      Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
    followed by
      SendWakeupPacket error: sent -1 bytes: 10065
    What can this be?
    Already thanks,
    John

    I did all the step with save mode and that didn't gave the same result.
    Then I created a new account and there itunes started up normally.
    So I contued with the user section.
    I removed the itunes directory from
    c:\Users\username\AppData\Local\Apple Computer\iTunes
    This gave the same result in not starting up.
    Then I removed the itunes directory from
    c:\Users\username\AppData\Roaming\Apple Computer\iTunes
    The a popup appears that the Bonjour Service has been disabled.
    I looked in services and saw that is was still running.
    But I tried to restart this service and it took a long time to stop this service.
    Even if I selected restart the Bonjour Service didn't start.
    Manually starting was not a problem.
    Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
    So Matt thanks for your answer.
    If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service.

  • HT4623 my iphone wont accept my sim after the update , and so it don,t complet turning on

    my iphone wont accept my sim after the update , and so it don,t complet turning on .

    It hasnt been jailbroken has it?

  • My Sony Xperia Z won't start /turn on after failed update attempt

    Try this  connect your phone to the wall charger > press andhold power & volume up > let it charge for 1 or 2 hours > after 2 hours > repair your phone with SUS Update Service (SUS) http://www.sonymobile.com/gb/tools/update-service/ http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

    A similar problem to the other posters, my Sony Xperia Z won't start after a failed update attempt. Following the support suggestions on the Sony website (http://www.sonymobile.com/sg/support/faq/w8-walkman-phone/update-software/software-update-failed-ps101/) failed. Solutions posted on this forum thread (http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/My-Sony-Xperia-Z-won-t-start-turn-on-after-failed-update-attempt/m-p/401787#M20133) have also failed. When I plug the phone into the wall charger, the LED comes on red, the SONY logo appears on my screen, followed by a message indicating that "The Software update failed. Make sure that your phone is connected to the computer and try again.", and then the phone turns itself off. The cycle repeats itself with no indication that my phone's actually being charged. Since it is unable to charge, plugging the phone into my computer does not trigger the update process to start, so I can't "try again", as the message so helpfully suggests. The computer also does not recognise my phone as being connected despite following the PC Companion's instructions to 1) unplug the device, 2) remove and replace the battery (which I can't do, because the battery is built in), and 3) turn it back on (which, again, I can't do, because the phone won't charge in the first place), before 4) plugging it back into the computer. Please help... Thank you.

Maybe you are looking for