My MBP  15" early 2008 / 10.6 ((2.4GHz Core 2 Duo/2GB/256MB VRAM/200GB 5400rpm)  is not working after looking to aYouTube short film. It made a strange strong noise , I closed it and when I switched on again I have a gray display and a frozen wheel o

My MBP  15" early 2008 / 10.6 ((2.4GHz Core 2 Duo/2GB/256MB VRAM/200GB 5400rpm)  is not working after looking to aYouTube short film. It made a strange strong noise , I closed it and when I switched on again I have a gray display and a frozen wheel on it... Can you help? Do I have to repair or change any part ?  Thanks

That model has a known fault in that Nvidea sold Apple and other computer manufacturers bad GeForce 8600M GT video chipsets that failed eventually. Apple had a program that repaired this at no cost to the owner but it expired almost two years ago.
If this is what happened to yours, and the symptoms suggest so, the only proper fix is a new logic board and I amd pretty sure Apple no longer has parts. When my Late 2007 MBP (same faulty chipset) failed, Apple told me there were no more parts and they could not even do the fixed-rate "depot repair" on mine even though I was willing to pay the ~US$300 for the repair.
The early 2008 MBP is on the vintage and obsolete list:
Vintage and obsolete products - Apple Support
The fact that yours is shown as "vintage" means Apple will not work on it but an independent service provider MAY be able to get the parts from Apple. However, as so may new logic boards were required to satisfy the repair program, from a practical standpoint boards for these are hard to find.

Similar Messages

  • Can Macbook 4,1 (early 2008) 2.4 GHz Intel Core 2 Duo be upgraded to Mountain Lion?

    I just upgraded to 4GB of memory after reading somewhere that the Macbook Model Identifier "4,1" can be upgraded to Mountain Lion.  I was surprised to read under 'how to upgrade to Mountain Lion' that Macbook's (Late 2008) are upgradable.  Aside from this upgrade being less expensive than buying a new Mac, my current Macbook runs perfectly after five years, or I wouldn't be considering an upgrade to the OS.  I've been told that Snow Leopard is the last truly solid OS from Apple, and I just got an iPhone 5 that would be more compatible with Mountain Lion.  Final note, the site that stated "4,1" is upgradable also stated that while Apple states maximum memory is 4GB, that in fact it can be maxed out at 6GB.  Optimistic until advised otherwise.
    Any input is much appreciated. 
    Thanks.

    Welcome to the Apple Support Communities
    OS X Mountain Lion requires a Late 2008 Aluminum or Early 2009 MacBook or later, so you can't install Mountain Lion in your Mac. Read > http://www.apple.com/osx/specs
    It doesn't mind that your computer is useless, because Snow Leopard is still supported and Apple updates Snow Leopard, so if you are happy with Snow Leopard, continue using that version. A lot of people say that Lion doesn't work properly with old computers, but Mountain Lion fixed most of its issues. Apart from that, the iPhone 5 is compatible with Snow Leopard in the same way as with Mountain Lion, so don't worry about that

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • MBP A1260 (Early 2008): Won't start, black screen, continuously lit LED - bad logic board?

    Hello everyone!
    I'm having a rather serious issue with my MBP A1260 (early 2008) running the latest version of OSX 10.5. This is what happens (or doesn't happen) when I start it:
    Usual start-up sounds (fans, HDD, Superdrive)
    No chime at startup
    Blank screen (I even can't see anything if I hold it against a light source)
    The LED is on continuously. Bright at first, then after a second only dim
    No backlight of the screen, no keyboard lighting
    No reaction to pressing the volume or brightness keys, even after waiting for a while (the OS isn't password protected)
    I tried a couple things and googled for a bit. This is what I've tried so far:
    Plug in an external monitor - no signal
    Removed the battery, used an old battery (which doesn't hold too much power anymore, but is working) - nothing
    Restarted with alt-key pressed to bring up the bootcamp menu - nothing
    Reset PRAM and NVRAM (P+R+opt+cmd at startup) - nothing
    Reset SMC - nothing
    Removed all RAM - nothing
    Tried all combinations of RAM modules and RAM banks individually - nothing
    As you can see, I've already tried quite a bit to get my computer back up, but there's been no success so far. As far as I can tell, this thing's logic board is broken, which would be a prohibitively expensive repair at about 600€ to 700€. I know the logic board is basically the whole computer, but that's an insane amount of cash for a four year old computer.
    Do you wise people have any other ideas how to get this thing running again?
    If not, I can only come up with three options:
    Sell the MBP on ebay as broken
    Buy another A1260 with a working logic board and exchange it or
    Pay for the insanely expensive repair
    Do you have other ideas?
    Luckily, I have another early 2011 MBP, which I'm using right now. But to be honest, it may be the last mac I ever own.
    Anyways, I'm thankful for all responses. I promise to keep you updated if I get the machine running again.

    Any ideas?

  • Fresh install on a MBP 15" (early 2008)

    I am going to install a fresh 500 GB Seagate Momentus XT into my MBP 15" (early 2008). I wish to do a fresh install of LION.
    I have made an install disk for LION.
    Will this work, any help will be greatly welcomed.
    Thanks

    You said you have a Lion install cd right? Boot to that disk. Then run the installer. The reason why the other disks wernt working is because they are UPGRADE cds. You need Leopard on the hard drive to use them. But the Lion cd does not need Snow Leopard to run. I myself have done a clean install of Lion using a cd. So, boot the Lion cd (be patient, can take a long time to boot to the cd), and then click Reinstall OS X Lion from the utilitys screen. Follow the installer and you should be good to go. Post back if you have any more problems!!!

  • MBP 15" Early 2008 No Numpad and Numlock?

    I have a MBP 15" early 2008 model. I am unable to figure out how can I use a numpad on this keyboard? My keyboard is identical to the one shown in this picture:
    http://www.gadget.co.za/imageLib/HomePage/SeriousHardware/MacBookProKeyboard.jpg
    Please help figuring out how to use numlock and numpad on this keyboard. I have tried using fn+f6 and all other random configurations that I found online but am still not able to use the numpad. Any suggestions are welcome.
    Thanks

    NumLock key has been taken out from early 2008 MBPs. Here's an exerpt from MacWorld review confirming it.
    From MacWorld review:
    One thing that has changed from the previous MacBook Pro is the row of function keys at the top of the keyboard. The location of the media, volume, and keyboard illumination keys has been changed, there are new keys to control Expose and Dashboard, and *the NumLock key (as well as the rest of the numeric keypad) is now gone.* However, the keyboard is nice and springy and has a comfortable, non-spongy feel.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • FaceTime is not working on my iPad. I've updated my iPad to the latest version of I0S and tried all the things that come up when I do a Google search. Any ideas? Thanks

    FaceTime is not working on my iPad. I've updated my iPad to the latest version of I0S and tried all the things that come up when I do a Google search. Any ideas? Thanks

    Have you tried the troubleshooting advice here:
    If you can't make or receive FaceTime calls - Apple Support
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    What exactly is not working?

  • I have deleted the calander on iPhone 4wheb tried to activate icloud for the first time. When I switch it off I  have probably chosen the delete from my device option

    I have deleted the calander on iPhone 4 .
    wheb tried to activate icloud for the first time. When I switch it off I  have probably chosen the delete from my device option

    Have a read here Transferring files from one User Account to another
    Stefan

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • When I exit firefox it closes the program but it gets stuck in memory so when I open it again i have to kill the process in task manager

    When I exit firefox it closes the program but it gets stuck in memory so when I open it again i have to kill the process in task manager, and it can be right away or I can come back a few hours later and its still stuck in task manager, I am tired of having to kill the processes every time I use firefox.
    == This happened ==
    Every time Firefox opened
    == a week or so a go ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; AntivirXP08; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hanging at exit is most often caused by an Extension or a Plugin.
    <u>'''Kill Application'''</u>
    In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
    See: [http://kb.mozillazine.org/Kill_application Kill Application]
    '''<u>Causes and solutions for Firefox hanging at exit:</u>'''
    [[Firefox hangs]]
    [http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
    [[Firefox is already running but is not responding]]
    <u>'''Safe Mode'''</u>
    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes <u>'''before'''</u> starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling <u>'''one at a time'''</u> until the problem reappears. <u>'''You MUST close and restart Firefox after EACH change'''</u> via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

  • Tecra M7: Tablet does not work after lid closing

    Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
    Doesn't seem to happen on hibernate or sleep.
    I have the lid set to do nothing on close.

    Hi
    What do you mean with tablet not working after closing the lid?
    Does the notebook freezes or what?? What happens exactly???
    The close the lid settings can be set to hibernation mode or standby mode or no action.
    These settings can be set in the power saver setup actions.
    If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
    Best regards

  • IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

    iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.  How can I get the notifications working?

    Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

Maybe you are looking for

  • DB Connect from BW on Oracle to MS SQL Server 2005

    Hello, I am having issues replicating Meta-Data from SQL server databases via DBCONNECT to SAP BW. For instance we have the CCM DB and the Siebel DB.  We can transfer meta-data from CCM with no problem (SQL Server 2000) but we cannot transfer meta-da

  • HP Pavilion All-in-One MS225 Desktop PC

    I have a MS225 pavilion, which have a 320GB seagate product and i replace the hard disk 500gb seagate product, it has being working fine but now the hard drive is always fail, i have to keep on booting before it will display the windows7, but when i

  • Access values stored in 2D Array in HashMap

    Hi everyone i would like to know how to access values stored in a 2D array inside a HashMap Here is a drawing representation of the map. So to get the KEYS I just have to execute this code: this.allPeople = personInterests.keySet();But how can I get

  • My responce to Apple's request to try Photos as an Aperture user

    From what I've seen and read from reviewers regarding the new Photos App, I currently have no interest. Maybe that will change but I am totally dismayed you would completely give up on the professional market and thoroughly dismantle a truly name bra

  • Trouble with object privileges /urgent, pls !!!/

    Hi all ! I've got the next problem. 1. Function in package use dynamic PL/SQL: snippet:      stmt :=      'select ' || 'r.role_name,' || 'u.locked,' || 'u.adm,' || 'u.ch_pwd_on_next_log ' || 'from ' ||      'usr5.c_roles      r,' || --- !!!!! 'usr5.c