My MBP can't detect my iphone4 once through usb hotspot?

When I upgraded iTunes 10.7 on the MBP (Mac OS is 10.6.8) that cann't detect my iphne 4 through USB hotspot, event on the MBP internet service list there're can't find my iphone 4 device as well. but when I choose to blue tooth hotspot that is work, I'm still preferred used to USB hotspot function.. have any one have this problem... lol

I am having the exact same problem with my Belkin hub after upgrading to Mountain Lion. The only temporary fix is to shutdown and restart the computer. It then works again, but then for some reason after awhile it stops working again and you have to shut down again. Strange. Any possible permanent fix?

Similar Messages

Can you make the iphone4 into a wifi hotspot to make ipad 3g

can you make the iphone4 into a wifi hotspot to make ipad 3g

http://www.tipb.com/2011/03/15/daily-tip-connect-ipad-iphone-personal-hotspot/
 Cheers, Tom

Can't hear text-to-speech through USB DSP headset

MBP5,3 OSX10.7.1
Using a noise canceling Plantronics USB headset (DSP-500), I've noticed that text-to-speech audio disappears (or is badly garbled) when played through the headset. Interestingly, changing voices among several choices in the Speech preference pane determines whether the voice is completely absent, or badly garbled (very slow). Audio is fine via speakers or via earphone jack, but when played through USB I get nothing. Using CLI "say" command in terminal also hangs. As soon as USB jack is pulled, the command completes.
I think it has something to do with the DSP in this particular headset (noise canceling) but I don't have a non-DSP headset handy to check this. Strange part is that this was not an issue with Snow Leopard.
It would be nice to be able to use headset for this audio as I use it for everything else in a noisy environment. Can anyone verify that this is not a problem with other USB headsets before I resort to another purchase?

Thank you. You're right, I didn't see the exact location you were describing: I went to Dictation & Speech
I tried to change it again and it wouldn't let me change it back to control + v so left it as control + a.
I did as you said (below), it spoke in Pages, so thank you.
But then I went back to Dictation & Speech to make them the same:
Tested in Pages... 'BEEP!' So I set it back to Control + A.
So now Control+A speaks as it used to - able to start and stop speech - only cannot be used in iWork apps.
And Control+S starts speaking in any app, but does not stop speaking unless I press Control+A. So...
Thank you, I guess you solved my problem, but now I have two sets of combinations for speech.
Control + A (Chrome, Finder, etc) start or stop speech
Control + S (Any app) start speech
I tried inputing 'Stop Speaking' in Shortcuts, but to no avail...

Can Wired Printers Print Over A Wireless Network Through USB Connection to the Router

I have been told by supposed experts that I can use older wired printers wirelessly through USB connections on a router and I have been told by other supposed experts that it does not work. This is what I have and what I am trying to do:
In my new home I have limited space and I dedicated an unneeded closet to office and computer stuff. I rebuilt the closet with shelves and drawers and I added power outlets and phone and coax jacks. I use a wireless HP Pavilion laptop (about a year old) running Vista anywhere in the house. The computer closet has an HP C309 wireless printer, an HP D4260 wired printer, and an Epson Photo R280 printer. I can't get cable or FIOS right now, so I am running the internet on DSL at 3.0MB. That signal goes into a router supplied by Verizon and I jump it over to a Netgear RangeMax Wireless-N Gigabit Router with USB.
There is no particular reason to have the Netgear router in the lineup except that that two networking "experts" (their term -- I have no frame of reference to judge them) said I could connect the HP D4260 and the Epson printer via USB cables to the Netgear router and then send documents to them over the wireless network. When I have these two older printers connected to the Netgear router, the network does "see" them and shows them as network printers. However, no documents ever arrive at them.
As an author, I print thousands of pages a year in draft mode for review and I would prefer to use the HP D4260 as it is far cheaper to operate and it prints far faster and quieter than the HP C309. Connecting it directly to the laptop is not convenient as it is nowhere near where I use the laptop.
Is there anyway to get at least the HP D4260, and preferably also the Epson R280, to print wirelessly via the network by connecting them to the USB port on the Netgear router? If not, I will have to buy a cheap, fast wireless printer, something I really don't want to do.
Thanks.

You did not give the model number of your Netgear, but I am sure that some Netgear routers with USB support USB hard drives and printers, where some models only support USB hard drives.
Either provide your model number or look at your documentation to see if your router actually supports printing.
Also, since you essentially have two routers in your home, make sure that ALL devices (printers and computers) are connected to the Netgear router, not to your DSL router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My MBP 2011 can't detect microphone, why?

My internal microphone works perfectly fine but when I insert an external microphone, my MBP fails to detect it. When I go to System Preferences>Sound>Input, nothing changes in the "Line In" area when I plug in my microphone. When I try to speak into my microphone, it's not picking up any sound at all. My headphone port works fine.
NOTE: My MBP 2011 went in for a logic board replacement/repair 2 weeks ago at an Apple Store. Is it possible this microphone issue is caused by a logic board problem?

This because line level is not Mic level, line level requires about 60 dbv/dbu or more or less of electrical gain (depending on voltage in to load specifications, db short for decibel is not necessarily a measuremet of SPL, sound pressure level, it is a mathematical equation reducing complex equations to a unit of measurement to use in math expressions...very simply put) than a microphone can generate.
You would need a mic pre-amp/mixer to provide a line signal, a mic can not provide anywhere near this level.
This is a very simplified explanation of the electrical therory at work here, and I don't think you are probably interested reading quite complex math equations that "crunch these numbers.
If you do an online search you will find a plethora of pre-amps that will boost this level up to line level, or you can look in to something like the Griffin iMic USB interface which will allow you to use a mic level signal into your USB port easily and affordably.
http://store.griffintechnology.com/catalog/product/view/_ignore_category/1/id/62 3/s/imic/
http://www.youtube.com/watch?v=lVZ8Ko-nss4
I hope this helps you understand what's happening and helps you out.
Some simplified explanations
http://www.ovnilab.com/articles/linelevel.shtml
http://en.wikipedia.org/wiki/Line_level

HT204380 How can I make my iphone4 call my contact's email on her ipad and not her phone (which is not a smart phone) when both info is in my contact list

When I use my iphone4 to call a contact on her mini ipad it seems to use her phone number from my contact list and this is not a smart phone or in use where she is. How can I make my phone use the e-mail address to call her on her wifi connection.

pdroth wrote:
You're off base... I know what this problem is, and I provided the workaround for her.
Then why was the OP able to make the facetime calls before, with both items in a single contact then (if I am reading his posts correctly)? I know I do not have to separate my contacts like that, and I do facetime with a couple of relatives with wifi only iPads (usually from my own iPad 4 or MBP, but I've done it once or twice from my iPhone 5 - all of which use the exact same contact entries).
Is this a quirk specific to an iPhone 4?

APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

just a summary...
i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
now, back to the topic..
so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
"4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
after reinstallation of itunes my DVD drive can be seen and just noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
so going back to the topic..
i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
so now i opened iTunes and BOOOM!
iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
[for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
and then you will see the screen below
click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
BUT the problem here is that your iPhone can't be detected on iTunes...
now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

Hi LSGZ,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

Black Screen on MBP, Can hear chime and can boot from HDD via another MBP!

Hope someone can help me here, as I'm at my wits end.
I've got two issues, one with my MacBook Pro 17in, 4GB RAM, 160GB 7200rpm (2008) and another with my iMac 24in. 4GB RAM, 500GB 7200rpm (2009).
Firstly the MBP, left work on Thursday last week, got home, powered up the MBP and got a black screen!!! Tried resetting PRAM, SMC, booting in safe mode, removing and re-installing RAM, removing battery and mains power and leaving off overnight etc etc, yet nothing happens. Benn all over the forums and have not found any solution to get my beloved MBP working on it's own. I can boot off the HDD using another MBP 15in, re-install Snow Leopard and as far as I can tell the HDD is fine, as I have run disk utility and it tells me the HDD is OK.
I can't figure this out and it's doing my head in, as I use this laptop for business use and just can't afford to go out and buy another Mac. I should point out that this MBP never had any issues when running on Leopard, but ever since I upgraded to Snow Leopard, I have had nothing, but trouble. I did a clean install, in fact I have done it at least twice, even erasing the HDD securely, both at 7pass and 35pass, yet I have had permissions issues regularly and on the odd occasion, I have also had the problem of the HDD not being recognised.
The iMac is nearly the same, but the screen is working, although the iMac doesn't see the HDD no matter what way I do, again, reset PRAM, SMC, safe boot etc etc. In truth the iMac has been a lot more unreliable, but with the screen working, if I can get any solutions here, then I'll be working to work on that without the need or hassle of working via another.
I think that the MBP is only just still under warranty, but the iMac definitely is, but I need at least one working for business use, so really only want to let Apple have one at a time to look at/repair etc.
Ideally, as the HDD is working in the MBP, if I could get a solution to the black screen issue, then I could do without the iMac for whatever time it takes, so if there is anyone out there that can help, I'd be so grateful.
One last thing, when I bought the iMac 24in., I also bought an iMac 20in., but I never upgraded the 20in. to Snow Leopard and to this day, it has worked flawlessly, without a single issue ever.
Perhaps, I'm getting paranoid here, but there seems to me to be a link between the ongoing and regularly occurring problems with both Macs ant the upgrade to Snow Leopard. Why also, or is it just pure unadulterated coincidence that both the MBP and the iMac 24in have failed at pretty much the same time??!!!!
I'm going mental here, so I hope someone out there has a better fix, then me overdosing on Prozac!!
PS
I'm not a mac expert, not good with a soldering iron either, but I'm capable of following good instructions.

Concerning your imac, have you tried installing the OS on an external drive and running the iMac from that? My friend in Texas had her iMac's hard drive vanish, so we installed the OS on an external FireWire drive I happened to have and then restored her data from a recent backup. So far I haven't had time to install the drive in her iMac, so it's been running off of the external for a long time now. Perhaps you could do something like that so you could at least have the use of the iMac while your MBP is in the shop. Once you get the MBP back, you can send in the iMac.
Be sure to report both of these to Apple and get case numbers so that you can document that the issues started while you were still under warranty--especially for the MBP that's about to go out of warranty.
Good luck!

My new MBP can't see my Time capsule

Hi
Thanks for any help with this :
I use my capsule about once every 2 weeks to back up the MBP.
Have a new MBP and wanted to back it up for the first time. The MBP is running 10.7.2.
It could see the Time Capsule originally but said it needed a firmware update as its an original 1TB capsiule:
I don't have the capsule connected to the internet directly because I just don't like the idea of that.
When you'd disconnect the MBP from the internet WiFi, to connect to the Capsule, the capsule would say it needed an update - HOWEVER when you'd connect back to the WiFi network then airport utility didn't see a capsule to see a need for the firmware update:
My questions are:
1) can you download the firmware manually.
2) can the USB slot be used for connecting to the computer ??? It seem not to be possible as nothing comes up on the computer when the two are connected
I tried other strategies like setting up the Capsule on the house WiFi - now the MBP can't see the Capsule at all at all, ----green light on, soft resets done, USB in the back.
The only thing I havn't tried yet is to get an Ethernet cable - years since I had one and lost. Guess I'll have to go out and get one
Thanks
Tom

partial solution - hold the reset button down for longer than one sec, held it down for 5-6 sec and this reset the connection info to default so the computer could see it again.
Getting the firmware onto it remained a larger problem.

Can't detect my wireless network

Hi,
A few days a go I started having problems with my Wirless connection. My Macbook Pro can seem to find it anymore. It can be gone for a week, and then out of nowhere it pops up again and works for a day or two. My iPhone connects fine to the network. I might add that the airport card totaly stoped working for a week a while ago, but it also just started working by it's self.
I'm running Mac OS X 10.6.4 and I'm using an D-Link DIR-655 as router with Firmware ver. 1.21EU
I can see all my friends networks in the dorm (and connect to them), but I cant see mine. Rly strange..
anyone have any idea what it could be?

Hi, I too am having the same problem. The MBP won't detect only my network but detects all other networks in the neighborhood. And mobile phone connects to my network. This has happened earlier too, but just sorted itself out on its own.
Thanks

JMF-based applet can not detect audio devices on Vista (?)

Hi,
As many people reported, I encountered the same issue - CaptureDeviceManager.getDeviceList does not detect any audio device on IE/Vista.
Here is my testing environment:
HP XW4600, RealTek HD Audio onboard sound card,
Vista SP1 (Business, Home Premium, and Vista64)
JRE1.5.0_16, JMF2.1.1e
A recording Applet runs in IE7 (which works fine on XP and its Java application version always works fine on Vista)
I have tried a number of things without success:
1)Use different audio formats as the input parameter for getDeviceList
2)Try CaptureDeviceManager.getDevice(new String("DirectSoundCapture"))
3)CaptureDeviceInfo info = new CaptureDeviceInfo(com.sun.media.protocol.dsound.DataSource.NAME,new MediaLocator("dsound://"),null);
4) Vector devices = (Vector) CaptureDeviceManager.getDeviceList(null).clone();
5)Uncheck UAC(Vista User Access Control)
6)Set IE settings least restrictive
7)Try signed or unsigned recording Applet
8)Pack the recording Applet to a jar and deploy to JRE\lib\ext
9)Run JMFInit and copy the files in JMF\Lib to System32 folder
On a few occasions, audio devices can be detected. For examples,
10)Upgrading an HP XW4200 (XP machine with AC�97 codecs driver) to Vista,
11)1/5 chance on the machines with both Sun JRE and MS Java SDK installed.
12)Trying Item # 9. it worked once on one machine, but after rebuilding the machine, the same trick does not play.
I am wondering if there is a way to let JMF-based applets detect audio devices on Vista or this is an inherent problem with JMF, IE and Vista.
I would appreciate it very much if you�d kindly offer any help and suggestions.
-Belfield

>
As many people reported, I encountered the same issue - CaptureDeviceManager.getDeviceList does not detect any audio device on IE/Vista.>(..in an applet)
>
I would appreciate it very much if you'd kindly offer any help and suggestions. >I suspect the basic problem here, is the installer that defaults to preventing the applet access to record sound (I am guessing that would 'spill over' into web-cam permissions). A quick test of that is to try the same code as an application.
If the application works, one possible fix is to launch the application using webstart. Webstart will work from a web page, and offers many other advantages over a standard applet.

Logic Pro X all of a sudden can't detect input from M-Audio Mobile Pre

I was recording guitars when I had to step away for a while. I closed the lid on my MBP and left. When I came back, all of a sudden, Logic can't detect any inputs coming from my USB interface. I have tried everything from rebooting, switching to the other input on my interface, updating drivers, but nothing seems to work. What's worse is whenever I start Logic with my interface plugged in, Logic gets stuck at Checking MIDI Drivers. If I unplug my interface, Logic would start fine, but if I plug my interface back, Logic won't detect it.
I am using the M-Audio's input while I am using the Built-In Output on the MBP (I don't have monitor speakers). It was working fine before.
I am using a Mid-2012 MBP 15" on OSX Mountain Lion and an M-Audio MobilePre MKII USB interface.

In this exact order
1) Unplug MobilePre
2) Remove it's drivers using the uninstall routine that is in the Driver DMG image ...
Note: If you get a message about it cannot uninstall.. Restart your Mac and then try to uninstall again...
3) Restart your Mac after you have uninstalled the drivers..
4) Reinstall latest drivers......
5) Restart Mac..
6) Wait until Mac has restarted and then plug in MobilePre...
It should then be correctly recognized and work....

I tried to follow the steps in recovery mode but itunes still can't detect it

i tried to follow the steps in recovery mode but itunes still can't detect it.
Ok ok. It did work the first time, however the phone got disconnected so then the phone turned itself on again.
I tried to repeat the same steps again but it did not show the itunes logo. It just turned on and went to the lock screen.
I did this for about 4-5 times. Each trial ending up with the same result.
So what i did, once the phone was connected to itunes i clicked the update button and waited for HOURS to finish the update.
It did restart and did whole other things. But it stopped and a black screen appeared with a text saying Iphone is disabled. Connect to iTunes.
Any suggestions on what to do next? I'm seriously feeling so frustrated right now.
So in case you didn't get it my phone was disabled after entering the wrong password too many times. Tried fixing it but it seemed to get worse.
Really desperate here.

HT4972 how can i update my iphone4 to ios5 using my iphone4

how can i update my iphone4 into ios 5?

Plug your phone to your pc open itunes and itunes should automatically detect that you need an update.
NOte you should backup your phone prior to doing the update.

I can't sync iphone with itunes via USB, Im using windows 8.1 system, after update7.0.6 itunes was not detect the iphone, pls help....

can't sync itunes with iphone via USB, windows 8.1 system

Right click on your device under Portable devices and click on Uninstall and when the uninstaller box pop ups select delete the driver and click OK. Now click on Scan for hardware changes on top of the page and see if you get apple mobile device support driver under USB Devices and if not then disconnect your device from the computer and try to connect it to a different USB port and check also open control panel and select Apple Mobile Device Support from the List and Click on Repair and check. If still the device is not showing under USB then uninstall the following services from your computer.
iTunes
Apple Software Update
Apple Mobile Device Support (if unable to uninstall ignore and move to next)
Bonjour
Apple Application Support
Restart your computer once after the uninstallation is completed and then download latest version of iTunes from http://WWW.apple.com/iTunes/download
Locate the iTunes setup file and right click the file and run the installation file as Administrator and let the installation complete.
Then check if your device gets deteced in iTunes and if still the device is not detecting in itunes then go to device manager and see under Usb if you can see Apple Mobile Device Support Driver and continue with the step. 5 of above given link in my previous post. And if still thedevice is not showing under USB then right click on your device under potable device and click update driver and first check for updates automatically and see under USB if you see the driver now and if not then go back to device under portable device select update driver, let me choose driver from the list, Have disk, browse file in the following location " C://Program Files/Common Files/Apple/Mobile Device Support/Drivers and select usbaapl file and install the same (if you can't find the driver on above location then look for the driver in Program Files(x86) instead of Program files and if you can't find usbaapl then look for usbaapl64 and complete the installation and then restart the computer and check if your device get recognized in iTunes.
Note: when installing the drivers keep the iTunes closed till the drivers installation is completed.

My MBP can't detect my iphone4 once through usb hotspot?

Similar Messages

Maybe you are looking for