MY MBP close session without any warning, is AC power and the only programs running usually are skype and safari

MY MBP is stand alone only with skype or safari running usually, suddenly close the session and i must reentry the password and start the session again, by the way any information unsaved is a completed lossl. The last year i changed the board in regard to the intel graphics card problem, but this problem is new from 1 o 2 monhs ago.
Some help is valuable.

Problem 1: Sounds like a bad adapter or bad DC-in card, or possibly a bad connection between the adapter and the card, or between the card and the rest of the computer's innards. Clean the contacts in the adapter plug and on the MBP and make sure they are securely and squarely connected. If that doesn't help, test using a different, known-good AC adapter. If that works fine, replace your adapter.
Problem 2: Run the Apple Hardware Test that you'll find (with instructions for using it) on one of the DVDs that came with your MBP. Look for an error report with "SNS" in it, indicating a faulty temperature sensor. When there's a bad sensor, the fan(s) operate at full blast all the time.
You could also just take the machine right back to where it was repaired and point out the problems that didn't exist before, but you will be better-prepared to do so if you've done this testing first.
Message was edited by: eww

Similar Messages

Turn off suddenly without any warning when plugin Adapter(Charger)

My Pavillion dv6-3208tx turn off suddenly without any warning when plugin Adapter(Charger) and it won't start unless i unpluged the adapter. I can run on battery. Pliz help...!

Make sure the keyboard is seated properly.
(Instructions can be downloaded here.)
Sometimes, plugging in the adapter when the keyboard is improperly seated can cause this behavior.

I have big problem with battery, It's not working good just two hours and stop without any warning when the battery in 50% then reach 30% in the same moment, then the iphone stopped,what I can do for that and I live in Egypt???any help

My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
what can I do with that??
Also, I live in Cairo,Egypt
waiting your recommendations

Hi,
"But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
Regards,
Thorsten

SQL developer starts and then disappears without any warning

Hi, guys:
I need to use SQL developer where there are existing connections. however, SQL developer 3.1 asked the java.exe location, and I chose java 6, now I can launch SQL developer but not able to continue running it. SQL developer starts and then disappears without any warning. Could anyone help me on this problem?
Thanks a lot!
Sam

Can you start the exe from the BIN subdirectory? That should open a command console, and maybe you can see any error messages there that explain what's happening. For step-by-step directions, here's some help:
http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-debug-info-for-oracle-sql-developer/
OR
Install SQL Developer to a new directory and run it from there and see if that helps you get around your current install's issue.

Laptop shuts down without any warning

My laptop is shutting down without any warning. It has done so twice. When I run the preboot diagnostic, everything is fine. When I run Dell Support Assist app, this is the error message that I got from the System History:
Application Error
Fault bucket 86066676302, type 4
Event Name: APPCRASH
Response: Not available
Cab ld: 0
Problem signature:
Pl: DllHost.exe
P2: 6.3.9600.17415
P3: 54504134
P4: StackHash_216b
P5: 6.3.9600.17736
P6: 55014336
P7: c0000374
P8: PCH_CF FROM_ntdll+0x000000000009177A
P9:
P10:
Attached files:
C:\Users\Raymond\AppData\Local\Temp\WER6C2E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Raymond\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_14cf863e
Analysis symbol:
Rechecking for solution: 0
Report 10: toala596-eca4-11e4-bfac-08edb9244ef6
Report Status: 0
Hashed bucket: 7b43e3b419dd3feaa74b55be5e190271
These files may be available here:
C: \Users\Raymond\AppOata \Local\Microsoft\ Windows\ WER\ReportArchive
\AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_l4cf863e

Hi ,
Thank you for writing to the Dell Community Forum.I am Jennifer and I work for the Dell Social Media Team .
To assist me to resolve this issue I would suggest you to try these steps and advise the result ,
*)Is this issue seen with all applications and any particular applications.
*)When the system crashed did you experience any over heating issue.
*)May I know the operating system installed on the system .
*)Would suggest you to work on this system in safe mode with networking then test if the same issue is seen .
*)Also as you mentioned that with the preboot diagnostic the system passed all the test so the system's hardware is working fine.
If there are any more queries do reply to this post with the system model ,operating system installed on the machine, service tag of the system(sent via private message) so that I can look into the details of the system and assist you better .
Awaiting a reply from you .
Kindest Regards,

PSE 9 reboots my machine without any warning message..

I am using Photoshop elements 9. i brought it recently. And the installation went
well.. but when i am using the software, my machine reboots without any warning message.
My System Configuration: INtel Pentium 2.19GH, 80GB Hard Disk and 2GB RAM. and operating system is XP.
Please help me in this regard.. what needs to be done...???

Hi,
Since nobody else is coming up with ideas for your problem, I'll let you know my thoughts.
As the system is suddenly rebooting, I tend to feel you might have a hardware problem. PSE 9 does use a lot of resource when it is working and could be causing the hardware to fail.
Just a few questions first:
1) how much free space on your disk drive?
2) does the system reboot when using any other software?
I have seen similar failures caused by overheating - sometimes a fan fails and needs replacing. Other causes could be a problem with the power supply unit - the extra processing load can sometimes cause the voltages to drop.
Since you said about the screen becomes blurry sometimes, it could be that there is a problem with the graphics card.
I'm not being rude, but how well are you with computers? If I were to ask you to check the event viewer, would you know what to do or would I have to give detailed instructions?
Brian

Macbook Shuts downs without any warning.

Hi All,
Recently I have noticed that my Macbook shuts down without any warning when the battery is out of power. Previously i used to get a warning when about 9-10 mins of power was left.
I have all the updates installed. Also I have not installed any new hardware.
Is there any settings in the System Preferences. What should I do to correct this situation.
Best,
Siva
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 4600
Remaining Capacity (mAh): 3580
Amperage (mA): 1542
Voltage (mV): 12220
Cycle Count: 113

I'd try a SMC reset - that usually clears battery/power related settings and might do the trick.
Blackbook C2D Mac OS X (10.4.9) 120Gig, 1Gig, Superdrive.

Labview crashes without any warning or error messages

Hi,
I have been using Labview programs for the last 2 months without any problem. All of a sudden the program has started crashing while running. There are no error messages on the screen. The program runs for long hours and during my intermediate inspections i find that Labview has closed without any sign on the computer. This has happened about 2-3 times in the last week but before this there was no such problem. Also this problem is not specific to one program alone. There are other independent modules that have faced the same situation. No two programs are run simultaneously, and the programs use only serial (one of the program also uses parallel) communications with connected devices.
Any suggestions to troub
leshoot / diagnose the problem will be highly appreciated,
Thanks
Gyro

Thanks for your comments. I can use the vi as a sub vi. The error/crash occurs randomly (anywhere from a before running the program to about 8hrs after starting it). Improtantly i have used this program for about 15 times without any problem. The same error is also occuring for other programs. And all of these errors have started occuring in the recent past 3-4 days. Any clues as to what might have triggered this?

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC?

HT1296 Can't get my Music off of my iPhone 4. My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. Help

Can't get my Music off of my iPhone 4...
My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. No Backup anywhere : (
If I choose to sync it tells me all of the Content that does not match the iTunes library on the computer will be erased, do you want to proceed & I have to say no.
How do I replace the music library on my Computer with the Music on the iPhone?
I got my pictures off because you can access them when you connect the iPhone using Windows 7 but you cannot see any of the music so you cannot access it when using windows so don't know what to do...
Help...

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

I have CS5 production, and the Sb program, has an analog delay effect. I deleted the default setting, and it disappeared. Is there any way to re-install it?

I have CS5 production, and the Sb program, has an analog delay effect. I deleted the default setting, and it disappeared. Is there any way to re-install it?

Hi Thanks a ton.. so I downloaded Sb from Cs5 download options
and it won't take the serial number, from the box. I bought Cs5
in 2010 in the box from adobe. It lists Sb5 on the back
of the box, and it's in line, and works fine.. paid about 1000 dollars
for the software. But, the downloaded exe file will not accept the
serial number. The same serial number in my account for Cs5
production premium suite. I guess the new cloud community doesn't
respond well to BOX installers or previous customers. Thanks a lot for
your effort but, at 40$ a phone call, I'll suffer through without the default
analog delay option.. everything else runs smooth so.. have a nice
day up there in the cloud.
Best Regards,
R Daves

(Mountain Lion) suddenly the screen turns black, and I have to use the switch to turn it on. And, the screen turns to zoom, and the only way to turn to normal is to close the window and start all over again?

(Mountain Lion) suddenly the screen turns black, and I have to use the on/off switch to turn it on. And, the screen turns to zoom, and the only way to return to normal is to close the window and start all over again?

Does the screen go black while you are using the machine? ...or after it has sat idle for a bit?
If it happens while you're using the machine, check to see if a hot corner has been set for sleep. You can do that here: System Preferences > Desktop & Screen Saver > Screen Saver and click the button labelled "Hot Corners..." in the lower right.
If it happens after a bit of idle time, that's normal sleep behavior. The delay can be adjusyed here: System Preferences > Energy Saver.
In either case, pressing any key on the keyboard should bring it out of sleep.
Re zooming -
If this happens while in Safari, and you are using an Apple Magic Mouse, a default setting applicable to it is that a soft double-tap on the mouse will zoom the Safari window. A second double-tap will bring it back.
If it is the entire screen that is zooming, Control plus scroll gesture on the mouse will zoom the whole screen. Repeat with the opposite scroll gesture to bring it back.

When using office for mac or i studio after inserting several pictures, my computer locks up and the only way I can fix it is to do a force quit. Why does it do this and how I I get it fixed without a force quit?

I have a mac book, with office for mac and iStudio installed. When I try to create a document using either one of these; after inserting several photos, the computer locks up and the only way I can get it to unlock is to do a force quit. Why does it do this, and how can I get it to unlock without having to do a force quit?

Are you using versions of the software that are compatible with the version of OS X you have installed? Very often such lockups are caused by application incompatibility.
The problem may also come from trying to use both sets of applications at the same time while not having enough RAM installed. Adding more RAM may fix the problem.
The problem can arise from corrupted support files such as preference files or Application Support files or corrupted cache files.
The image files you are using may also be corrupt thus causing the problem.
You might start with:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

Trying to create a new movie. It tells me to name my movie, and the only event choice is the last movie I made. I don't want it there. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

MY MBP close session without any warning, is AC power and the only programs running usually are skype and safari

Similar Messages

Maybe you are looking for