My MBP display is not working. Need to move data to new MBP Retina.

Hello.
My 3 yr old MBP display failed (display just showing vertical and horizontal lines).
I bought a new MBP Retina today.
Genius Bar told me to simply attach FireWire, then press "T" on old MBP to boot in Target Mode.
Then, look for old MBP HD icon on new MBP Retina desktop.
I cannot find old MBP icon on desktop.
I cannot transfer data from old MBP to new MBP Retina.
Any help would be appreciated?
Ken

Genius bar told you right - you need to start your old MBP up into target mode (booting while hold down the T key) but you need to have the right FireWire cable hooked up to the machines before you boot either. What year is your old model? Does it hve FW400 or FW800?
Here are the instructions from Apple - http://support.apple.com/kb/HT1661. Take a look at it and see if it helps. Also make sure that you have the Finder set so that external and remote disks will show up on your Desktop. When the disk mounts you can either just copy over files or, if you want to transfer accounts and associated directories, use Migration Assistant in your Utilities folder to copy over the info.
Good luck - call back if it's not working.
Clinton

Similar Messages

My thunderbolt display is not working with my MBP retina 13''

Hi,
     I just received both a new macbook pro retina 13'' and a thunderbolt display. Everything was working properly yesterday but today, I have no clue why, the thunderbolt display is not working anymore.
     . the power supplier for my laptop given by the thunderbolt display is still working;
     . when I don't connect my laptop through the thunderbolt connection, I can use the usb sockets as power supplier , for my phone, for instance;
     . as soon as I plug the thunderbolt cable, the usb socket is not feeding any more my phone, whereas the screen is not displaying anything.
     . If I take a look in the system report, in the thunderbolt tab, there is "no device connected"...
I restarted plenty of time my laptop, took care to reinitialise the SMC as well as the PRAM, and nothing changed. I also disconnected the thunderbolt display, waited few minutes (and more), but nothing changed, again the black screen.
Has somebody an idea?
Thanks

which model air do you have?
try both a pram and smc reset
plug the monitor into a different electrical outlet and a different port on your Mac (if you have multiple tb ports)

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

Reset the NVRAM/PRAM and Reset the SMC, then try again.

HT1863 i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help

i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help. in chennai. I also need to retriwve my warranty paper online, as I am right now in chennai ad all my docs are in Cleveland.

You posted in the iPad forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
You could contact Apple Support and see if they have the original discs for that machine but it would be 10.4.11 and there's no reason not to go to at least Snow Leopard, especially since the 10.6 discs would probably cost the same as a replacement set of 10.4.11

I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of hard drive do I purchase. There is not a lot of data to be transferred.

I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of of hard drive must I purchase so that it works with the Tower? There is not a lot to transfer.

MG,
What we might need to do is to change the question. What computer do you plan to use the data on in the future? For example, if you have a newer tower, just move the hard drive to the new tower. If you want to use the data, what about an ethernet LAN to get the data over? If you want to archive the data, how do you store the second drive? What are your plans for the first drive? If the new software will not recognize the old file type, the data must be exported. Just getting files to another hard drive will not finish your journey.
As Allan said, knowing the exact model and year of your tower is important. My suggestion is to find a user group near you. Please post back with more information, including the name of a large city near you.
For example, our user group just experimented with a 1983 Apple IIc that predates the Mac. It started right up, read files from 1984 and saved them from a 5.25" floppy to a 3.5" floppy. That 3.5 floppy will go into a platinum G3 which will read PRODOS files using Apple File Exchange. That G3, with a USB card, will allow saving the files to a USB flash drive. But, somewhere along the way, some software has to read the file and convert it to data that is useable by current software.
Ji~m

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store.

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Hi my iphone 5s is not working. I bought it in New York on July. Im from Argentina and here isnt a place official Apple. Help!

Hi my iphone 5s is not working. I bought it in New York on July. Im from Argentina and here isnt a place official Apple. Help!

Apple does not have an international warranty. If the phone was purchased in the US, it must be serviced in the US, in warranty or out of warranty. Also, Apple will not accept international shipments...the phone must be physically returned to an Apple store in the US or mailed from within the US.

My MBP display is not working. Need to move data to new MBP Retina.

Similar Messages

Maybe you are looking for