My MBP running Lion, has 'kernel panic' - when i try to restore a new os from the time machine, it does not cure the problem.

Question:
My 2009 macbook pro has 'kernel panic' - it is running Lion - I have visited the nearest Apple Store twice, & tried repeatedly to re-install Lion, then recover from Time Machine.
However, the problem persists - anyone have any ideas??
Regards
CH
England

Can you post the kernel panic report?
Open Console > System Diagnostic Reports
To find the panic. Post in your reply.

Similar Messages

  • HT3042 when i try to send songs to my ipad it says 'this device does not have the necessary services' what can i do about this?

    when i try to send songs to my ipad it says 'this device does not have the necessary services' what can i do about this?

    call monster, the manfacturer of beats and ask them: http://beatsbydre.com/support/international-support-contact-numbers,default,pg.h tml

  • When I try to restore my iMac on Mavericks with Time Machine it stalls on the apple logo

    After trying to restore through time machine it hangs on the apple logo with the spinning disk below it. I have left it for 3 days nothing happens. So I just reinstalled Mavericks and it works but its seems broken. Most notable is iPhotos, when I open certain photos I get an exclamation mark, and some videos give me error code OSStatus -54. I have rebuild by holding option key but nothing. I have downloaded library manager but I get a ton of errors. Please help.

    Hi Supermani,
    I have the same situation after my internal hard drive stopped working and was replaced.  Everything seemed to migrate okay from my time machine back up, apart from iPhoto library.  All the photos since February this year give an exclamation mark and all the videos give the error code OSStatus -54.  Rebuilding hasn't worked and neither did library manager.
    With the restore, I updated from iPhoto 8 to 9, so the library had to be updated.  I am just trying a new restore of iPhoto Library, which I'll try to open with my old version of iPhoto 8.  I'll let you know how I go.  If you find any solutions, please post them!
    Tom

  • When I try to go to a link from my e mail it does not go there but goes to my firefox homepage instead

    Trying to press links and instead of going straight to it as before, it is now going to my firefox homepage and not to the link I wanted

    You can also try Settings>Safari>Clear History, Cookies and Cache. Then restart the iPad and try Safari again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • HT201250 Time Machine App does not start under OS X Lion

    I tried to restore an item from my back-up, however the Time Machine App does not start.
    I use the latest version of OS X Lion 10.7.5 (Build 11G63).
    I used the work around by opening my back-up volume with the finder and copied the wanted item.
    However, this is not the correct approach I think.
    Does anybody have a solution to my problem?

    Just the last addition to my question.
    The modifications of the access rights took very, very long. In the end I cancelled the process.
    Nevertheless, time machine now works correctly. As far as I can see it.
    If annybody runs into similar problems. The solution is I think just to modify the access rights on the back-up volume to read and write access for everyone.
    Probably OS X Lion added an undocumented feature to the time machine.

  • Help!!!  Brand new MBP with Santa Rosa Kernel Panics when started with...

    Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with external HD firewire 800 after 20 sec...
    I don't know what it could be???
    Do you???
    Thanx
    Jay

    I'm actually having a similar issue and I don't think its related to networking at all.
    I'm currently working in a corporate environment where we deploy pre-built OS X images to machines. I recently upgraded my images to 10.4.10 before we got our first Santa Rosa machine. This image was built on a MacPro and worked on all Intel Macs down to a MacMini CoreSolo. When I deployed my prebuilt image to the SR MBP, it caused a kernel panic immediately.
    Further investigation revealed previous builds of OS X, including 10.4.10 upgraded from any other model Intel Mac will kernel panic the SR MBP. Going backwards the SR Build of OSX will not work on any previous model Mac, as any other build typically does, but causes severe graphical distortion, as if it does not have the display drivers for the other Macs.
    To make a long story short, I think your issue comes from the fact that your external hard drive has an older build of OS X 10.4 than the SR MBP will run (even though you may have upgraded it to 10.4.10). Anyone who can corroborate my story with some more testing, please chime in.
    I haven't found a solution for this issue yet other than keeping a seperate Santa Rosa Core 2 Duo image for my deployments.

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Can the apple ID that's the way to eliminate the use of the vacuum when the applications running on the iPad so it does not ask the apple ID code.

    Can the apple ID that's the way to eliminate the use of the vacuum when the applications running on the iPad so it does not ask the apple ID code.

    I don't understand what you are asking - what are you trying to do ?

  • HT3275 Time Machine gave me this message after updating to Mountion Lion "The network backup disk does not support the required AFP features."

    After upgrading to Mountain lion, I got this message when it tried to backup to "MybookLive" network disk.
    "The network backup disk does not support the required AFP features."
    What are AFP features and why can I now not back up to my network disk?

    I had a similar issue when I tried to do a network-share backup w Time machine when the share was on a Leopard OSX G5 Power PC.
    I think Time Machine looks for a minimum feature set support from the afp mounted drives so they can be used with Time Machine.
    Western Digital may have to update the firmware on your device to support the new afp features.
    Hope this helps.

  • When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

    Hi
    I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
    but does not change the remote file i.e.Index.htm, or three stages1.htm.
    My Localroot folder is C:\Gods Plan Web\
    The site map layout is C:\Gods Plan Web\Index.htm
    The folder for the remote site is /public_html/
    Should the local root folder mirror the remote site, i.e./public_html/
    if this is so, what should I put into the
    (a) Local Root Folder box?
    (b) site map layout box?
    The FTP is performing well other than changing the intended file.

    You should be uploading only the contents of your local root to the public_html folder (remote root).
    The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
    Site - Whatever you named your site
         index.html
         images
         pages
              page1.html
              page2.html
    If you have any folder between Site - and the index.html page, like...
    Site - Whatever you named your site
         mywebsite
              index.html
    It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
    www.mydomain.com/mywebsite
    public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
    If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

  • When I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

    when I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

    Try using /Applications/Utilities/Disk Utility to repair file permissions.
    Bob

  • When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes

    When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes

    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    Are you trying to restore to a PC or an Mac?  Either way, I'd remove iTunes, empty the trash, restart, and download/install the latest version.  Also, check the versions of OS that the latest build of iTunes will work with.

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

    I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

    Supported file formats for iOS Pages
    Import:
    Pages ’09 for Mac
    Microsoft Word - Office Open XML (.docx) and Office 97 or later (.doc)
    Plain Text files (.txt)
    Export:
    Pages ’09 for Mac
    Microsoft Word (.doc)
    PDF
    As you can see -  .rtf is not supported.

  • When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

    When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

    Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
    1360 x 1360 = 1.0
    790 x 640 = 1.23
    2048 x 1366 = 1.5
    An 7 x 5 image = 1.4.
    So you'll need to crop the images to 5 x 7 before printing.  The first two images are a little light in the pixels to produce a high resolution 5 x 7 print. 
    Happy Holidays

Maybe you are looking for